KIndle fire hd7 tate 2nd gen done all the flashing twrp 2.8.7.0 etc would not come out of fastboot , tried everything I could and eventually got it out with KFHD SRT v1.3.5 chose option 1=Restore-Factory Rooted with SuperSU.apk, then chose option 6=Reboot normally (must have a standard cable connected to work). I did
It rebooted up to White kindle logo and orange fire logo screen then goes into a bootloop back to same screen over and over.
Have tried with fastboot cable and still does the same,tried holding volume up while powering on but does not go to twrp recovery screen, have tried holding power for 30 seconds same 40 seconds same thing rebooted up to White kindle logo and orange fire logo screen...
Is there no hope to recover it?.
Update I have managed to get into twrp recovery version 3.0.0.0
but when I send this message adb push cm-12.1-20161016-NIGHTLY-tate.zip /sdcard/
I get this error
E:\1 Kindle HD7\flasher-v2-20140624-tate\files>adb devices
List of devices attached
D025A0A03344087N unauthorized
how do I get authorised
Related
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
soupmagnet said:
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
Click to expand...
Click to collapse
i might be in the same boat...my kindle fire logo turns blue and gives me a msg at the bottom to press power button for boot menu
when i do i get normal boot,recover,and reset boot mode...when i click on one it just says booting and power button stays organish red for ever
Maybe you don't have your drivers properly installed
sent from my rooted kindle fire hd 7
Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
If you have twrp installed and the blue kindle boot screen just hit volume down and use the side load feature. But if your fastboot is giving u a problem where u can't hit update driver I would assume it would be because windows is already searching for one still? If so tell windows to skip obtaining from windows update and it finish sooner so u can try to update it manually.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
Hi Baconrind. Screwing one’s device is a good opportunity to learn new things. At least this is what happened to me and I’m glad I did. A couple of months ago I bought a new KFHD7. I spend "wonderful :laugh:" weeks as the happy owner of a KFHD7 until I started to discover the shortcomings of same, so I started reading xda-developers’ stuff to try to customise the device. First I rooted it to be able to install Google Play Store. The idea was to stay as close to stock as possible. Unfortunately I lost root with the first Amazon OTA update, then I decided to install a second bootloader, TWRP, etc. To do that I followed Hashcode’s method Kindle Fire 2nd-bootloader + TWRP for the Kindle Fire HD 7 but at some point I bricked :crying: my device. I was stuck at the Kindle Fire logo. I spent hours browsing through xda-developers and discovered that the first thing to do was to get a fastboot cable. I did not have the patience to wait for it to come from China or wherever they make them, so I found a couple of posts on the xda forum here and here. I made my own even my soldering capabilities are quite limited. I shut down the KFHD7 and plugged the “fastboot” cable to the PC and then to the Kindle, a couple of seconds later I could see the fastboot logo. Once I saw the fastboot logo I unplugged it and used the regular data transfer cable instead. Before I started the unbricking process proper I downloaded and installed this tool: KFHD_SRT_v1.3.5.-7.3. I followed the onscreen indications and could reset my KFHD7 back to its original state. Good luck.
Hey all,
I am in quite a conundrum. My Kindle Fire HD 7" tate device is bricked. Let me explain what I have done so far...
1. I first installed TWRP using the standard and I was planning to install CM 11 on it
2. I accidentally deleted the CM 11 rom files while doing a wipe on TWRP
3. Tried side-loading the rom but somehow ADB sideload didn't work and the device was not being recognized and sideload would hang for hang (tried waiting as long as 1 hour)
4. Then I tried to reinstall FireOS using the KFDH System.img Restore tool from the forums here and managed to somehow uninstall TWRP and get it into a infinite logo loop
5. So tried using various methods to reinstall either TWRP or FireOS and after some 3-4 different utilities that I found on the forums here, I finally tried Kindle Fire Utilitiy 0.9.9 to unbrick it. Tried changing the bootmode to recovery (5000) and have managed to brick it for good.
We are now in the present day (after step #5). As soon as I turn on the Kindle, it shows KF orange logo and then switches to Fastboot mode even though the Factory USB cable is not plugged in. Once I plug it in, it goes into infinite loop with screen going off and windows giving me a constant USB plug-in and un-plug sound. The device is being detected as OMAP 4440 (or 4400?) and I am unable to do anything at all. Have I gone to no-man's land? Or can I still salvage the kindle?
Looking for some help... Any help :crying:
You should plug in the fb cable with the Kindle powered off. See if that gives you a stable fb state wherein you can push your files via adb.
Rushead said:
You should plug in the fb cable with the Kindle powered off. See if that gives you a stable fb state wherein you can push your files via adb.
Click to expand...
Click to collapse
Hey when I plug it in to the fb cable it boots up into the orange and white kindle fire logo and goes into fastboot and then starts re-loading in windows. After plugging in, if I shutdown the device by pressing power button for 15 seconds, the re-loading in windows stops but after than adb doesn't recognise the device - says error no device
"reloading in windows"? What do you mean? It should be powered down when you plug it in, then when it boots into fb mode, you're ready to adb.
OMAP 4400 is a hard brick. You flashed KFU and now the bootloader is screwed. You will need to look up how to flash the emmc on here.
KFHD 7" 2012 (TATE) Hard Brick recovery process....
LinearEquation said:
OMAP 4400 is a hard brick. You flashed KFU and now the bootloader is screwed. You will need to look up how to flash the emmc on here.
Click to expand...
Click to collapse
I know this thread is a little old but, if anyone is looking for how to get there hard bricked kindle fire HD 7" Tate recovered do a search for: TOPIC # t2828906 by overlode
On page 4 of the thread I have posted a procedure.
Bogie
Hi,
I know you should have seen this a lot but i'm kinda stuck, i tried to upgrade my Recovery TWRP with a new version with flashify but now my tablet is unusable.
It show the kindle fire (red logo, not blue) and restart over and over again...
I plugged it to my pc but i can't see it in my devices manager, like it never connect...so no ADB (no devices), i tried different drivers to be sure but it doesn't work.
I need help.
Thanks
Hello,
I tried installing a custom recovery on my Kindle HD 7 3rd generation. After entering the fastboot commands, the terminal didn't react anymore and now I'm stuck on the Kindle boot, just showing the "Kindle fire" logo. I tried getting into the recovery by pressing the Power and Volume down buttons and factory reset it, but this takes no effect.
What can I do?
Thank you in advance!
krmax44 said:
Hello,
I tried installing a custom recovery on my Kindle HD 7 3rd generation. After entering the fastboot commands, the terminal didn't react anymore and now I'm stuck on the Kindle boot, just showing the "Kindle fire" logo. I tried getting into the recovery by pressing the Power and Volume down buttons and factory reset it, but this takes no effect.
What can I do?
Thank you in advance!
Click to expand...
Click to collapse
Which recovery?
What steps?
Same exact issue, I am waiting for my factory cable to arrive. All the reading I've done says that's the only way to get the 3rd gen into fastboot from this lockup. I will have my cable tomorrow and will post from there.
I'm having the same exact issue as well unfortunately the fastboot cable didn't work. The first thing the twrp instructions has you do is erase the boot... Recovery is still there but that is useless. No ADB or Fastboot access either. OMAP USB connects briefly during recovery boot tho...
My Kindle Fire HD& Tate 2nd gen is stuck in a fastboot bootloop. When I turn on kindle I get Kindle fire logo for a second then immediately get fastboot kindle fire logo then screen goes black and when I connect normal usb lead I can hear kindle connecting and disconnecting to pc this goes on and on with black screen.
I used kindle fire utility to check fastboot status with option 4 then I connect fastboot cable and on pc it says waiting for device >product: Tate-PVT-08 finished. total time: 0.109s Fastboot is enabled.Press any key to continue . . .But I can not get it out of the fastboot bootloop.....I have tried this in command prompt fastboot -i 0x1949 reboot then sats waiting for device then I connect normal usb lead and it says rebooting but then just comes back to the Kindle fire logo for a second then immediately then fastboot kindle fire logo and once again goes through connecting and disconnecting issue...
I have also tried disconnecting battery for a few minutes and get same result,also tried a couple of times each holding power for 20,30,40,50,60 seconds then let go wait a couple of seconds then press power again,but with all of them it still goes back to Kindle fire logo then fastboot kindle fire logo and once again goes through connecting and disconnecting issue...any help appreciated as to how to get it out of this fastboot loop
update on this I managed to restore using cmd prompt and Kindle_fire_HD_7(backup 7.2.3+root).zip...
Happy again
Update even better news I have now managed to install twrp recovery and Cyanogenmod 12.1 on it and its running smooth...