Hi,
My Kaiser has suddenly changed so that when I wake the phone up, I have to unlock the keypad by hitting unlock at bottom left and then unlock again mid way up the screen.
It never used to do this - simply pushing the power button woke up the screen and the keys were no longer locked.
The phone is set so that all keys are locked except the power button - which is what I use to wake the phone up.
Can anybody please suggest what could have changed and how to set it back.
Thanks.
What software did you install lately? Or maybe it was a feature in one of the softwares that you have, and you just enabled it!
Hi,
I just purchased screen locked phone (requires password to unlock). I thought hard reset will fix it but it does not do anything.
I hope volume UP and volume DOWN buttons simultaneosuly while phone if off then press Power button and release it while continuing holding VolUP and VolDown but nothing happens - phone stays on locked screen. Does this procedure works on locked phones?
Mmmm...
Make sure you're holding the buttons in firmly while you briefly press the power button. It doesn't matter that the device is password protected, all the data will be cleared and set to default ROM settings.
If the device just switches on, it means that one or both of the volume buttons weren't completely pressed when you hit the power button
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
artisticcheese said:
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
Click to expand...
Click to collapse
can u get it into bootloader mode?
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
artisticcheese said:
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
Click to expand...
Click to collapse
hold volume button down and press power button. if you can do this just flash a new rom from the sd card.
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
artisticcheese said:
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
Click to expand...
Click to collapse
its starts booting windows mobile? or tri color screen?
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
artisticcheese said:
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
Click to expand...
Click to collapse
well damn...... ill try to help u out, ill do some looking around and get back to u.
Hard reset
Be sure first that device (not the screen) is turned off, then:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
Thanks,
I figured this out. I was so stupud, I understood phone is off is like screen is Off. It actually meant the whole phone is off instead (had to remove battery for that).
The First thing you need to do: Power-OFF your device.
since it's locked, software interaction may not possible. you need to take the battery out, and put it back in 2-3 seconds later
Then, hold VOLUP and VOLDOWN tightly, and hit the power button to start the hard reset procedure.
htc inspire
hello friends I have the same problem do you fixt your phone? if yes please let me know how you did it please
Thanks I solved my problem..
Hard reset
I have samsung galaxy fit. and forgot the password nothing happen even reboot the phone. does any one help me
Hi,
Diamond is not going to bootloader (tricolour) screen after MTTY. MTTY was successful but nothing happening after pressing volumedown+center button.
Now device is just showing - Touch diamond when i switch on.
I have diamimg.nbu on internal storage, is there any way to trigger install.
It was working fine before mtty.
Pull battery out to turn it off.
Put it back in.
Press and hold volume down
Press reset button.
The reason its only showing Touch Diamond is that the MTTY process has cleared off your previous OS. You need to get it back to bootloader and try MTTY again.
I have tried all those stuff but no luck, for every thing diamond just vibrates and shows "Touch Diamond".
I guess boot loader is not working, is there any way to connect to it and repair bootloader.
I have tried snoopy from some post but thats also of now help.
Taken from PPCGeeks:
"Hold down the Volume down key and power button, the take the tip of your stylus and press the soft reset button (bottom left corner of phone under battery cover). After you press reset button keep the Volume down and power button press until the bootloader screen comes up"
Let us know if this works.
Thanks Super....
This is not working, only option i see is some way to connect to it through USB because i had faced this problem earlier also but that time RRU updater used to push it to bootloader.
volume down button used to work only with original HTC ROM for me....only a few time it used to work with cooked ROMs....
Hi,
Anyone can suggest some advance tool which can connect to diamond if its not going to bootloader through normal methods.
Its all clear by MTTY, i have ROM image on internal storage.
Solved finally.......
Hold only volume button pressed, press reset button and immediately after that press ok or back button
I was using my phone a few hours ago, and the volume screen was on and wouldn't go away. My volume was also changing itself. That, and the unlock screen was really buggy.
I figured maybe this was an app gone awry, so I decided to reboot. Now when I reboot, it goes right to the fastboot screen, but I can't use the volume keys to move, they don't respond at all.
So can anyone provide any insights? Is this likely a hardware or software problem?
Also, if I have an unlocked bootloader (which I do) does that void the warranty?
I am currently on 6.0.1 build MOB30G stock. At times the power and volume button don't respond. no matter how hard you press them. If the screen is locked, the only way to turn on the screen is to get a call or attach the charger or simply press the power key for 10 seconds+ and the phone restarts. Rest of the time the buttons seem to work properly. Judging its more of a software problem than a hardware one , I have done a factory reset on the phone.. but the problem has reoccurred. I believe a recent ota update may have caused it.
Any one else facing the same issue?