Hi all,
I uploaded "BA_WWE_BelDT_12200_557_10602_SHIP.exe" on ftp://xda-developers.com/BlueAngel/...
This is the new Dangaard ROM for QTek 9090 in English.
Please post your comments on that ROM when you upgraded your machine!
Sam
Hello!
When i try to open this link a get permision denied... u know why? Thanks
Hi Larkyn,
You need to login with
user: xda
pwd: xda
Sam
won't let me in either despite using logon data you suggest.
Get Rom
Hi,
You should use your FTP program in stead of IE-explorer, it has a lot of problems connecting to FTP sites
Siteaddress is xda-developers.com
Not more not less, user and password as stated earlier in this thread.
Cheers
Esor
actually user & pwd are lowercase xda
the forum capitalizes them because it recognizes them as entries in the encyclopedium
Update time
How long time takes an update?
Cheers
about 25 to 35 mn.
Update
My Qtek stands with a blank screen, saying USB at the top and V2.06 at the bottom, is that correct?
I hate programs without an indicator
works fine for me, which one am i after though I see a few but none actually say they're in english?
Nevermind, found it. Thanks.
Re: Update
esor said:
My Qtek stands with a blank screen, saying USB at the top and V2.06 at the bottom, is that correct?
I hate programs without an indicator
Click to expand...
Click to collapse
As it turned out, this was an information that I was not connected to an USB v2.x port, but an old 1.1
After moving the cable to the USB 2.0 port, I rebooted the PC, and started upgrading again. This time with success.
The Rom update works with my Qtek9090 - but the BT is the same version (1.3500) as can be dowloaded elsewhere on this forum.
Jabra 250, still gives problems, as connection variate from full power to zero power even when both devices are kept still at a table.
So a new BT version that works properly with the headsets are still a miss.
Cheers,
Esor
samvds said:
Hi all,
I uploaded "BA_WWE_BelDT_12200_557_10602_SHIP.exe" on ftp://xda-developers.com/BlueAngel/...
This is the new Dangaard ROM for QTek 9090 in English.
Please post your comments on that ROM when you upgraded your machine!
Sam
Click to expand...
Click to collapse
Sam,
have you installed this update ?
Regards
Filip
Hi Mr. Gadget,
No, I didn't, because I do not have that much time at this moment and a reinstall of all my applications and configuring my PDA would take me too much time!
Sam
Updated
works fine for me, but I can not see any difference from me other version
Radio and BT was updated, but does not work any better :-((
Thats what I mean, if you already have installed BT 1.3500, the is no difference on the Bluetooth radio.
But, I now get that Bluetooth will not initiate without a softreset, and if I do that in the craddle, it keep getting the message, so perhaps a new error was introduced - It could be my Qtek also however :roll:
I will not update my wife's Qtek 9090 to this release, as I see no really difference, and do not want to do all the work.
samvds said:
Hi Mr. Gadget,
No, I didn't, because I do not have that much time at this moment and a reinstall of all my applications and configuring my PDA would take me too much time!
Sam
Click to expand...
Click to collapse
Hi Sam
same here, i have (i think ) a good stable ROM and nothing missing on my 9090 at this moment (after applying the BT patches) .. so i'll stick with this version untill a major upgrade is avaible
regards
Filip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just installed this on my PDA2K tonight ,and I will let you know how it works. I had 1.22.167 before and it was okay with no major improvements, so we will see how this one works out.
Mr Gadget said:
samvds said:
Hi Mr. Gadget,
No, I didn't, because I do not have that much time at this moment and a reinstall of all my applications and configuring my PDA would take me too much time!
Sam
Click to expand...
Click to collapse
Hi Sam
same here, i have (i think ) a good stable ROM and nothing missing on my 9090 at this moment (after applying the BT patches) .. so i'll stick with this version untill a major upgrade is avaible
regards
Filip
Click to expand...
Click to collapse
Hi,
I have just upgraded to this ROM and all seems well for the mic volume level issues that I was having during a normal conversation . Unforunately now thou the previously perfectly fine speakerphone sounds very cloudy and unclear!?! :evil: Was just wondering if anyone has had a similar experience?
Cheers, JDH
Well,I have run this for 5 days now with no real changes except my wifi range is better. I have everyone telling me that they can hear themselves when I use the b/t , so I may change to something else.
If I could get the 1.22.169 to work,I would give that a try. But still getting country error, error in xda3nbf ,and checksum error in baupgrade. :? :? 8)
hdbueller said:
I just installed this on my PDA2K tonight ,and I will let you know how it works. I had 1.22.167 before and it was okay with no major improvements, so we will see how this one works out.
Mr Gadget said:
samvds said:
Hi Mr. Gadget,
No, I didn't, because I do not have that much time at this moment and a reinstall of all my applications and configuring my PDA would take me too much time!
Sam
Click to expand...
Click to collapse
Hi Sam
same here, i have (i think ) a good stable ROM and nothing missing on my 9090 at this moment (after applying the BT patches) .. so i'll stick with this version untill a major upgrade is avaible
regards
Filip
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Well, I switched back to 1.22.167 ,and I no longer have the "echo effect" with bluetooth.My WiFi is still good,and the b/t is working well. If anyone ever figures out how to put 1.22.169 on a PDA2K I will try that.Otherwise I will wait for the next big thing to come along....... 8)
hdbueller said:
Well,I have run this for 5 days now with no real changes except my wifi range is better. I have everyone telling me that they can hear themselves when I use the b/t , so I may change to something else.
If I could get the 1.22.169 to work,I would give that a try. But still getting country error, error in xda3nbf ,and checksum error in baupgrade. :? :? 8)
hdbueller said:
I just installed this on my PDA2K tonight ,and I will let you know how it works. I had 1.22.167 before and it was okay with no major improvements, so we will see how this one works out.
Mr Gadget said:
samvds said:
Hi Mr. Gadget,
No, I didn't, because I do not have that much time at this moment and a reinstall of all my applications and configuring my PDA would take me too much time!
Sam
Click to expand...
Click to collapse
Hi Sam
same here, i have (i think ) a good stable ROM and nothing missing on my 9090 at this moment (after applying the BT patches) .. so i'll stick with this version untill a major upgrade is avaible
regards
Filip
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Related
Found this out on howardforums.com
http://www.howardforums.com/showthread.php?s=&threadid=568666
http://communications.siemens.com/c...1774_rArNrNrNrN_prodId:76051,00.html#Firmware
Firmware is v1.33.110
Anyone know what the deal is, fixes etc.?
Also, will installing this wipe everything?
Further info
http://forum.xda-developers.com/viewtopic.php?p=91334#91334
Rom has password issue
MDAIIIUser said:
Further info
http://forum.xda-developers.com/viewtopic.php?p=91334#91334
Rom has password issue
Click to expand...
Click to collapse
Ok, I read that thread and didn't find any useful information. The conclusions it leads to are
-no one has successfully installed this rom
-the new rom does things which we don't know about
What do you mean when you say that "the Rom has [a] password issue"?
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
AdmiralAK said:
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
Click to expand...
Click to collapse
I hope you didn't hear that on the HOFO thread, because that was me speculating, and I have no evidence for it - just a hunch.
However, I would also like someone to verify. :wink:
Dster
If you own a sx66 then this upgrade is for you and should be a better one than your last.
Others out here see the 1.35, get excited and hope to install this upgrade on a non siemnes devices. When they try this they come upon the "Password issue" which in short says that you cant use that upgrade with the tools that are found on this site.
Check wiki for a better understanding.
No Simlock
AdmiralAK said:
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
Click to expand...
Click to collapse
Installed the new rom. I can verify there is no sim lock on it.
does anyone know how i could perform this upgrade while using the highest avalible radio version? 1.06.02
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
MDAIIIUser said:
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
Click to expand...
Click to collapse
I cant wait
New to this
MDAIIIUser said:
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
Click to expand...
Click to collapse
Sorry I am new to this.... how would I upload just the extended rom?
You'll first need to unlock your Extended ROM.
Download this file and run it on your SX66:
http://www.beyondthetech.com/downloads/phone/modding/BA_ExtROMTools.cab
Then go Start > Programs > ExtROM Tools > Unhide.
Reboot your SX66, then you'll see a folder called Extended_ROM. Copy that out to your desktop, then up to the FTP site at
ftp://xda:[email protected]
Just in case you didn't know, this folder contains the first programs and settings that it runs upon a hard reset.
Please let me know when you're able to do this. Perhaps somewhere in there is the key to resolve my annoying "05"-text-message-for-voicemail notifications issue.
Thanks!
Updating one of our SX66's as I type this.
We'll soon see what happens...
I did notice that the radio stack isn't as updated as some of the other stacks out there. I'll test it for a while, and if necessary, 'upgrade' back to the higher version.
uploaded.
Just updated the ROM and the RadioROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How are DUN and SIM lock?
Any noticeable improvement? worth the update?
BT Versions
What version is the BT stack in this update?
Any improvments with BT out of memory errors?
I've downloaded this update. It has the same bluetooth version as 1.31WWE, no WMP10, but several DLLs like btagsvc.dll are newer. Radio is 1.02, which is obsolete.
Format of NBF files is changed, I've explained it in "hacking" section.
Extended ROM contains old apps, the only useful thing is WLANPatch.CAB. I don't know what RestartRadio.exe and AddContacts.exe programs do, maybe they also worth installing.
I've uploaded this update converted to the old NBF format to ftp://xda:[email protected]/BlueAngel/1.33.10WWE-from_SX66/
I have not tested it, so use at your own risk!
mamaich said:
I've downloaded this update. It has the same bluetooth version as 1.31WWE, no WMP10, but several DLLs like btagsvc.dll are newer. Radio is 1.02, which is obsolete.
Format of NBF files is changed, I've explained it in "hacking" section.
Extended ROM contains old apps, the only useful thing is WLANPatch.CAB. I don't know what RestartRadio.exe and AddContacts.exe programs do, maybe they also worth installing.
I've uploaded this update converted to the old NBF format to ftp://xda:[email protected]/BlueAngel/1.33.10WWE-from_SX66/
I have not tested it, so use at your own risk!
Click to expand...
Click to collapse
Restart Radio turns the radio on and off and addcontacts add's cingular's customer service and some other contacts, so I would definately say they are not needed.
AdmiralAK said:
How are DUN and SIM lock?
Any noticeable improvement? worth the update?
Click to expand...
Click to collapse
No SIM lock, using my AWE SIM;
Not sure how to check DUN;
NOTICEABLE better performance with BT headsets, Mot 810, 820 and Jabra 250, MUCH better, clear sound, cracking and static is GONE;
Worth the update? Hell ya.
Hello all!
I port new build for your device.
In attach you find a link to this ROM, but in archieve only nba-file.
This mean that this ROM only for experienced users.
pass: k0ster
Port from what device?
Great thanks. Could you give some info on the rom. What device was it ported from? installed apps etc.
Many thanks
Sean Giles UK said:
Great thanks. Could you give some info on the rom. What device was it ported from? installed apps etc.
Many thanks
Click to expand...
Click to collapse
Ported from trinity.
XIP-section, drivers and all applications from yours official wm6wwe-rom.
Added MS Office (Word, Excel, PowerPoint, OneNote, FaxView, ZipMobile)
Security OFF for install uncertifyed applications.
Enabled disconnect button and time in GPRS-bubble.
Screenshot from rus-version:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please put the Herald WM6 firmware by k0ster on rapidshare.de
nice release k0ster, thx for the hard work. Took me a while but I guess now I guess I can finally start cooking from a clean ROM.
CHEERS
btw its CE OS 5.2.1236
hi,
i have some questions...
the first is a very basic question: what means WWE ? (multilingual?)
the second is connected: is this rom in german?
my xda terra has already CE OS 5.2.1236 but the built 17741.0.2.1 ... is an update recommended?
Does the romupdate imply a radioupdate? i have already the higher version 02.85.90 ...
Thanks in adavance
wiedsche said:
hi,
i have some questions...
the first is a very basic question: what means WWE ? (multilingual?)
the second is connected: is this rom in german?
my xda terra has already CE OS 5.2.1236 but the built 17741.0.2.1 ... is an update recommended?
Does the romupdate imply a radioupdate? i have already the higher version 02.85.90 ...
Thanks in adavance
Click to expand...
Click to collapse
WWE - world wide english
17944.0.3.1 - the latest build from Microsoft dumped from Trinity
This ROMupdate contain only OS, not IPL,SPL,Radio,ExtROM,Splash.
This rom - ENGLISH.
neptune said:
nice release k0ster, thx for the hard work. Took me a while but I guess now I guess I can finally start cooking from a clean ROM.
CHEERS
btw its CE OS 5.2.1236
Click to expand...
Click to collapse
Ouch.
I'm sorry this is really 1236-core.
This is because i dont have Herald and haven`t possibility to check workability of this ROM.
Can this be flashed using Asergs methods? I only ask because most roms I have are OS.nb but this file ends in .nba
Hi guys.Its great to be here. k0ster thanks for the work. I got the nba file. Now the problem is how i am going to flash this file to my pda? Do i need to run a windows application. Because i just copy the nba file to my device and its not running. Also how i am going to backup my original rom? ın the case of failure how i am going to load the original rom. Lots of quesitions from a new bie Anyway thanks for help
I have renamed it to OS.nb, and used the same tool as PDAVIET has, but after 20 minutes it is still at CopyFileToTFFS(OS.nb:0 , 0, 04400000), is there an solution for this? My PDA is still on now, so i proberly can rollback to a other version, but i want this clean version of windows mobile, not all the crap in other ROMS.
Rename?!
uxsebas said:
I have renamed it to OS.nb, and used the same tool as PDAVIET [...]
Click to expand...
Click to collapse
may I quote K0ster here:
k0ster said:
In attach you find a link to this ROM, but in archieve only nba-file.
This mean that this ROM only for experienced users.
Click to expand...
Click to collapse
Obviously you can't just rename that file. Something else has to be done here.
Monarch73 said:
Obviously you can't just rename that file. Something else has to be done here.
Click to expand...
Click to collapse
It worked, after 50 minutes it still didn't finished, so i decided to plug of the usb cable and do a hard reset (my pda was frozen), after that i got the bootscreen of k0ster's ROM! It works perfectly, only some minor things i don't understand:
I cannot use the ReTOUCH dialer again, if i install it and restart my pda, i don't get the TOUCH dialer, but only empty images. On the PDA VIET ROM it worked. Anybody idea why this is hapening?
To k0ster: Can you make some changes in this ROM or second ROM? I would like to have standard in the rom that .cab don't get deleted (This is a registery setting). And the Dialer skin etc is working.
Thanks!
ROM not finished?
uxsebas said:
It worked, after 50 minutes it still didn't finished, so i decided to plug of the usb cable and do a hard reset (my pda was frozen), after that i got the bootscreen of k0ster's ROM!
Click to expand...
Click to collapse
Maybe the flashingprocess wasn't finished and you now run your PDA from a "half-baked" flashmemory ...
I'd recover it by applying a WM5 RUU and try to reflash again.
Monarch73 said:
Maybe the flashingprocess wasn't finished and you now run your PDA from a "half-baked" flashmemory ...
I'd recover it by applying a WM5 RUU and try to reflash again.
Click to expand...
Click to collapse
Just a word of caution, anyone upgrading to this rom or any cooked WM6 rom from another wm6 rom should downgrade to a WM5 otherwise you will experience a wide range of problems.
cheers
ROM is okay?
It seems like the rom is okay, but my phone is CID locked so i cannot roll back to Windows Mobile 5 en then upgrade to Windows Mobile 6. This should be working fine (ive upgraded before). Does anyone know a program to customize the rom?
I have the T-mobile wing. Do I need to CID unlock it first before upgrading to this rom.
and MOST importanty, how big is the page pool size?
marscandybars said:
I have the T-mobile wing. Do I need to CID unlock it first before upgrading to this rom.
and MOST importanty, how big is the page pool size?
Click to expand...
Click to collapse
CID unlock is not required if you upgrade using ASerg's method for flashing. Check out the txt file in the attached zip archive, and if you follow EVERY step(including flashing from Guest mode) it should flash without porblems.
AFAIK the pagepool on this ROM was C0 (which is 12MB) but I could be mistaken. Regardless of the PP size it is not that difficult to alter and would be glad to assist you if you are having troubles with Paul's guide at Modaco.
Hi.
I think i'm not a: "experienced user" (sorry). But i (as almost every one) want to upgrade my Herald to new ROM, so can You tell me how Upgrade with your .nba file?
freemanvn said:
Hi.
I think i'm not a: "experienced user" (sorry). But i (as almost every one) want to upgrade my Herald to new ROM, so can You tell me how Upgrade with your .nba file?
Click to expand...
Click to collapse
You should really search the forum for that one!! explained many many times!
Touch Flo Professional Rom v4.12.07.09
For HTC Herald
- CE OS 5.2.1238 Build 17745.0.2.3 Original ROM(Not new but verry stable)
- Change icon system black Touch style
- Update ArcsoftMMS_4_2_8_1
- SIM Manager 6.25
- New keyboard Touch Style
- HTC_X-Button_1_51_30470_2
- And ect ect..
PP size : 6mb
Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom have 2 part :
Part 1 :
http://download187.mediafire.com/1imv1h0jgdtg/2iy5g2bmgco/HERALD_WM6.0_4.17.07.09.PV.part1.rar
part 2:
http://pdaviet.net/attachment.php?attachmentid=45728&d=1187220016
mirror part2:
http://uploaded.to/?id=i0cr3c
Info and version Rom update :
http://pdaviet.net/showthread.php?t=12072
Cheers..!
Nice one, but i really dont like the style of the HTC Home clock
I agree, i like your roms, because to work very well, but i really don't like al the visual crap you've added. I like one with the official rom like this, then the ORGINAL htc kaiser home screen, ORGINAL dialer pad etc, and a reduced poolsize, fix for keeping cab files after installation (like in all your roms). Can you make something like this?
PLease upload the second part to a other website, like box or also mediafire.
We are unable to read russian here on these forums.
iTeQ said:
PLease upload the second part to a other website, like box or also mediafire.
We are unable to read russian here on these forums.
Click to expand...
Click to collapse
Links onderin kan je de taal veranderen van Rusisch naar Engels, je kan je gewoon registreren (zonder activatiemail) en downloaden!
iTeQ said:
PLease upload the second part to a other website, like box or also mediafire.
We are unable to read russian here on these forums.
Click to expand...
Click to collapse
This is not Russian language ... if it was Russian this would probably be called PDARUSS
OK anyways here is mirror of part2.
Is it possible to install it even if the mobile isn't CID Unlock ?
Thanks for answer
djhook said:
Is it possible to install it even if the mobile isn't CID Unlock ?
Thanks for answer
Click to expand...
Click to collapse
Yes.Update by ASerg tool..!
Does this new version fix the issue in the xxxx.08 version where hitting the touchflo didn't bring it up until you spun the cube?
...or the "X button hits the right softkey instead" issue?
Password for rar file?
Is it just me or did someone else receive a promt for password when unpacking HERALD_WM6.0_4.17.07.09.PV.part1.rar ?
Password=?
I see Network Wizard bug was not fixed in this release. Let me quote myself
kogen said:
Your TouchFLO button went back to Calendar due to Network Wizard usage.
This should already be fixed in the registry BTW to:
Code:
\HKCU\Software\HTC\NetworkWizard
DefSoftKeyName = "TouchFLO"
DefSoftKeyOpen = "\Windows\APLauncher.exe"
To go back from Calendar to TouchFLO make sure you have those values in registry:
Code:
\HKCU\Software\Microsoft\Today\Keys\112
Default = TouchFLO
Open = "\Windows\APLauncher.exe"
And you are all set
Click to expand...
Click to collapse
tom_codon said:
Yes.Update by ASerg tool..!
Click to expand...
Click to collapse
ok thanks. but in case of bricking, can I use the WM6 update to unbrick my device ?
Yes you can.
ok I'll try this cooked rom
I tried this ROM out, X-button issue appears to be fixed now. The only problem I'm having (still) is that on the 6 button HTC Homeplug, the weather never downloads correctly. I can install a different version over this one and then it downloads fine, but I lose all of the skinning that's been done to it which I sort of like. Anyone have a way to fix this, may have been discussed before.
Babberingen said:
Is it just me or did someone else receive a promt for password when unpacking HERALD_WM6.0_4.17.07.09.PV.part1.rar ?
Password=?
Click to expand...
Click to collapse
It's: PDAVIET
All caps.
giving it a whirl right now...
something wrong with it (part 1), when i download it in Opera, it dl about 1KB and say it finish (it is corrupted) but in Firefox it downloads normaly .. other version i all dl in Opera and works wel. .. something wrong with it..
Hello i have a problem with this rom it wil not boot up, all the others rom's work fine but the v4.12.07.09 after update via ASerg Policies stays on the with screen. I have the wm5 allready installed, that works fine. and ill puth back the v4.12.07.08 see if that will work. did any one have the same problem ???
don't flash from PDAVIET installation
mvwood said:
Hello i have a problem with this rom it wil not boot up, all the others rom's work fine but the v4.12.07.09 after update via ASerg Policies stays on the with screen. I have the wm5 allready installed, that works fine. and ill puth back the v4.12.07.08 see if that will work. did any one have the same problem ???
Click to expand...
Click to collapse
I don't know if I understood correctly but updates from a previous installed PDAVIET Rom usaly aborts with an errormessage while flashing. This errormessage is often overlooked and so people start their Heralds with half-flashed roms. This can't go right.
Personaly, I recommend to install an official WM5 or the newly released offical WM6 RUU PRIOR to installation. Then you can update to PDAVIETs version normaly.
New build OS for HTC Herald:
CE OS 5.2.1908 Build 18508.0.7.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here:
http://www.pdaviet.net/showthread.php?t=13325
I noticed this over on PDAViet this morning. Can you update the changes besides the OS version?
PhamQuang said:
New build OS for HTC Herald:
CE OS 5.2.1908 Build 18508.0.7.0
here:
http://www.pdaviet.net/showthread.php?t=13325
Click to expand...
Click to collapse
Hi,
I just installed this new version, it runs great, but I was unable to get Biotouch to change my video player. It's currently set to \Windows\ping.exe instead of \Windows\wmplayer.exe. I made all changes as with all previous version but this one does not change the path even after a soft reset.
Going back to version .12.
I'm just wondering if any body else had this problem.
Thanks for your feed back.
1st file gives me service unavailable atm. Anyone care to reup who has d/l already.
EDIT:nvm, silly me forgot how to perfrom a right click
Hey. I'm lookin' at trying this later. Has the auto method for the touchflo been incorporated into this yet? That's the only thing holdin' me back from updating to .12. I know it's not in that Rom either, just too lazy to set everything back up again. lol
...So yeah, just installed the rom, and it seems to run fine. Just one thing. . . anybody else having problems syncing to a corporate exchange server? I can't seem to get my work email to sync up.
Could someone please upload part2 as attachment please?
thnx
i wish we didn't have to zip attachments, would make it easier to allow uploads of rar files...
The Dutchman said:
Could someone please upload part2 as attachment please?
thnx
Click to expand...
Click to collapse
And here's part 2!
EDIT: Oh damn... I'm sleeping again!
what changes this rom? some description? (sry for speling, im 16 years old)
ttran001 said:
Hi,
I just installed this new version, it runs great, but I was unable to get Biotouch to change my video player. It's currently set to \Windows\ping.exe instead of \Windows\wmplayer.exe. I made all changes as with all previous version but this one does not change the path even after a soft reset.
Going back to version .12.
Click to expand...
Click to collapse
Did anybody have this problem?
Or am I the only one?
Thanks,
Did you hit the little button next to the path? Because I was able to change mine.
Mi|enko said:
Did you hit the little button next to the path? Because I was able to change mine.
Click to expand...
Click to collapse
That's strange, I have always changed the path by spelling it out.
I will reload the rom and try it again.
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Smilez_c said:
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Click to expand...
Click to collapse
I will let you know in about 15 mins, I'm reloading my wing rite now.
active sync
Smilez_c said:
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Click to expand...
Click to collapse
I'm using an actual t-mobile wing and active sync works fine, at the same time I've tried all versions of pdaviet starting at .10 and up and along with touch it 1.0 and 1.1 , oem with touchflo added and never a prob with active sync.
Smilez_c said:
can anybody confirm if active sync works with this os on the wing because previous versions coruupted active sync
Click to expand...
Click to collapse
Hi,
Just finished the rom upgrade and yes the sync works fine.
mmm thats wierd only 1.1 works fine for me but pdaviet corrupts active sync u get error message
Does my wing have to be unlocked before i can flash the rom?
Mi|enko said:
Did you hit the little button next to the path? Because I was able to change mine.
Click to expand...
Click to collapse
Hi,
I got the same thing, when i click on the Video button it opens both wmplayer and ping.exe.
Lesson learned here, going back to .12 until some one fixes this issue.
I'm kinda new to this
from the How To upgrade file am i suppose to follow the instrictions 3 of them:
The order of installation OS:
The order of installation ExtRom:
Extraction current ExtRom:
Do i do all 3 in order ?
Also what mode do i need to be in ?
I'm running Shipped T-Mobile Wing right now.
Hi!
I want to present you my new build for our himalaya!
It is 23563
NET CF 3.5 BUILT IN!
You will not have any problems with any application!
It was built with new aerokitchen so it should really work well )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ah, link!
CLICK HERE
Enjoy
wooow amazing, big thanks aeroflyluby.
try this now.
Very good ROM But i think i have found a bug:
I can't access any websites in IE, i can connect to GPRS but no "connection". The ActiveSync logo is still visible after disconnecting from the cradle, but with an X under the 2 arrows, is this why the GPRS don't work properly?
Also, a little noob-question? What does the different RAMDISK-sizes mean?
I used this ROM for 2 days
it" good rom
thankyou aero
start testing in ukraine...
why can I receive file from another phone/device by bluethoth
arifurrokhman said:
why can I receive file from another phone/device by bluethoth
Click to expand...
Click to collapse
It's not a bug, it is feature!
LOOLL
aeroflyluby said:
It's not a bug, it is feature!
LOOLL
Click to expand...
Click to collapse
It took you hours to build it in - and then, it is detected as a bug. Funny!
thanks aeroflyluby this looks like another triumpth for the still going strong himalaya.
keep up the good work!!!
Nice ROM with .Net CF 3.5 included
Using 16 MB RAMdisk version
Sascha
hello aeroflyluby,
- i can't received MMS (install ArcSoft 5.2.8.5)
- Internet Explorer not work (GPRS ON)
thanks...
wowwwwwwwwwww
sorry for the noob inquiry. i've had a himalaya for under a week and its my first time to upgrade from windows 2003 to this rom. it doesn't have a letter recognizer in messaging. tried searching but i can't seem to find the cab. i tried downloading and installing fingerkeyboard v2 for vga but it messed up the screen alignment on my pda. i had to switch to ather 6.1 to fix the problem. how do i get and install letter recognizer or a big touch keyboard or keypad to this rom?
thanks.
atomlifer said:
sorry for the noob inquiry. i've had a himalaya for under a week and its my first time to upgrade from windows 2003 to this rom. it doesn't have a letter recognizer in messaging. tried searching but i can't seem to find the cab. i tried downloading and installing fingerkeyboard v2 for vga but it messed up the screen alignment on my pda. i had to switch to ather 6.1 to fix the problem. how do i get and install letter recognizer or a big touch keyboard or keypad to this rom?
thanks.
Click to expand...
Click to collapse
I think it is deleted from 6.5.x builds. 6.5 21884 have it.
I think it is not needed because you could type faster on keyboard.
You can install ezInput as default input method, it works well here.
If you can't find correct version I could upload one which works.
Post your results
I don't get it I tried to install this rom and it always hangs on the startup screen. what I'm I doing wrong?
I think it is deleted from 6.5.x builds. 6.5 21884 have it.
I think it is not needed because you could type faster on keyboard.
You can install ezInput as default input method, it works well here.
If you can't find correct version I could upload one which works.
Post your results
________________
Click to expand...
Click to collapse
thanks for the suggestion. i downloaded ezinput 1.5 no keyboard vga cab together with its language pack. the cab won't install because of untrusted certificate. i installed sdk certs but the ezinput cab still won't install. hoping for other suggestions. thanks.
rrb008 said:
I don't get it I tried to install this rom and it always hangs on the startup screen. what I'm I doing wrong?
Click to expand...
Click to collapse
Do you have XDA II or XDA IIi?
atomlifer said:
thanks for the suggestion. i downloaded ezinput 1.5 no keyboard vga cab together with its language pack. the cab won't install because of untrusted certificate. i installed sdk certs but the ezinput cab still won't install. hoping for other suggestions. thanks.
Click to expand...
Click to collapse
CAb in attachment
The one I have is a Qtek 2020, and I managed to install several other roms in it.
This one I tried and it won't go past the qtek splash screen.
I put it in bootloader and the update was successful, when I reset it, nothing...
rrb008 said:
The one I have is a Qtek 2020, and I managed to install several other roms in it.
This one I tried and it won't go past the qtek splash screen.
I put it in bootloader and the update was successful, when I reset it, nothing...
Click to expand...
Click to collapse
When you get into bootloader, there should be an info about version, could you tell me?
I really think you have wrong phone.
Also you can take a photo of your device and send it here, just suggestion
Bootloader version is 1.03
I can't post outside links, but here is a pic:
h**p://picasaweb.google.com/lh/photo/c0vc6FaQxEqpM7MauFQneQW46g_f-iZl2VgddFUL1sg?feat=directlink