Related
hi i was flashing my i9000 with odin3 with XXJP3-REV03 the phone was in download mode and the PC was uploading some boot files and its slept away from my hands and disconnect now its only shows a (phone sign with desktop PC )
its not detectable by Odin anymore pls help any help is appreciated in advance ,
its not going in download mode anymore what to do ,thanks
its ok now
inserting a external sd take me to download mode strange but i got it back thanks
brother i also have same problem ...will you plz tell me how you sole your poroblem.....
Hi all ,
Please help me . When I upgrade my liquid by acer-a1-tool . suddenly my acer liquid is close and the acer-a1-tool tell me your device it is not connect .
After that I am separated wire from my liquid and I am try to turn on my acer liquid but it did not respond . And the all buttons not respond .
Please help me . Because it is new and I am bought is before 2 weeks .
Sorry my English is poor .
help is here !
try copying the .zip files of any custom rom.. n then copy to SD card n insert in phone n run the phone is recovery mode (volume dwn + camera + power)
phone will vibrate thrice n then release the buttons.. u r ready to insatll the new rom..
or
if u want to get it done on A1 tool, then proceed normally, if it tells device not connected or something, simply unplug the usb (from phone, NOT from PC) and re-insert. A1 tool will re detect n proceed with installation !
cheers
iDiamond said:
Hi all ,
Please help me . When I upgrade my liquid by acer-a1-tool . suddenly my acer liquid is close and the acer-a1-tool tell me your device it is not connect .
After that I am separated wire from my liquid and I am try to turn on my acer liquid but it did not respond . And the all buttons not respond .
Please help me . Because it is new and I am bought is before 2 weeks .
Sorry my English is poor .
Click to expand...
Click to collapse
Go to modaco. there are more developpers for liquid. I think someone could help you
Hello, after houers of reading posts i found out that no1 haz the same problem az me.
Basicly i formated my internal SD on my Galaxy s, ( conected the phone to a pc, right click format, the internal insted the external SD )
now my phone cant boot up, i cant run recowery mode, can only run download mode.
if i turn the phone normaly on it yust rebots ewry 5 sec.
Can somone pliz help me
igorvrecar said:
Hello, after houers of reading posts i found out that no1 haz the same problem az me.
Basicly i formated my internal SD on my Galaxy s, ( conected the phone to a pc, right click format, the internal insted the external SD )
now my phone cant boot up, i cant run recowery mode, can only run download mode.
if i turn the phone normaly on it yust rebots ewry 5 sec.
Can somone pliz help me
Click to expand...
Click to collapse
well you just probably need to flash a rom now!
How do i do that, since i cant ented recowery mode. all i can do iz enter download mode, and when i connect the phone to a pc its showin no internal internal memory 0 mb
or do i need to root it again like i did the first time i flasht it.
Does Odin not work when you're in Download Mode?
If it does, the stock Gingerbread Firmwares are here.
ok gona tray now, ty
ok so i tried to use odin, but when the phone wanted to rebot it dident turn on enymore, the computer cant recognize it enymore when i plug it on the usb, i cant ewen turn it on enymore while usb cable is pluged in, and i cant enter downloadmode either when the phone iz unpluged, only loop scren.
Take out the battery and try entering Download Mode again by holding the Volume Down, Home and Power button at the same time. Then download JVR from samfirmware.com. It will include Odin3. Select "MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5" as PHONE, "CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5" as PDA and "CSC.tar" as CSC. Remember to select "Re-partition".
No luck vith volumen down+home+power, the phone yust keps rebooting,and if i plug it on the PC by USB i cant ewen start the phone. Eny other idea (o and vhat rom shud i download to instal from odin if i can get it werking, or iz that all included in the package). Sry for the stupid questions but im realy confused now and frustraded and all bicoz 1 misclick.
Try taking the battery out for half an hour, then reinserting, and try down load m mode again, if that doesn't work repeat, but this time hold buttons before you insert battery, post back and let us know what happens
Sent from my GT-I9000 using XDA Premium App
Ok so i managed to get download mode werking by using a USB dongle i think this is caled JIG, now i need ure help, after formating my internal memory im not sure if i can do recowery, basicly i am a bit afrade to mess it up ewen more so if enyone vud tel me what to do next, do i need odin, and what rom do i need to download, prety sure i cant use darky for this. Or if there iz a threat about this cud somone pliz post a link, i am hawing truble finding it.
TY!!!
d0ggy said:
Take out the battery and try entering Download Mode again by holding the Volume Down, Home and Power button at the same time. Then download JVR from samfirmware.com. It will include Odin3. Select "MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5" as PHONE, "CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5" as PDA and "CSC.tar" as CSC. Remember to select "Re-partition".
Click to expand...
Click to collapse
But, do you tried this?
I think it is the right solution
igorvrecar said:
No luck vith volumen down+home+power, the phone yust keps rebooting,and if i plug it on the PC by USB i cant ewen start the phone. Eny other idea (o and vhat rom shud i download to instal from odin if i can get it werking, or iz that all included in the package). Sry for the stupid questions but im realy confused now and frustraded and all bicoz 1 misclick.
Click to expand...
Click to collapse
you could try the magic jig ??. its costs very little to make and it works every time for me, just do a search for jig in the forums its a brilliant tool and so simple to make and you have nothing to lose and it will not damage your phone, if you were closer i would send you mine. good luck and regards
Hi Guys,
I tried to upgrade rom from 2.3.3 to 2.3.6 got on this forum , using odin 4.43
the port was reconized and the process started but stay locked at 4/12 during 1 hour
so that I had to stop odin and shut down my i9001 from downloading mode .
now when restarting device I get icon showing a phone and a pc with yellow triangle and exclamation point in it .
Please help, what ca I do?
I made a full data+system backup using titanium on my sd card before stating the operation, could it be used ?
thanks in advance !!
Eric
Can you acces download mode? If you can, just try again with odin..
Hi,
You mean it is possible to get dowload mode , even if I got thei triangle pc phone logo ?
You should be able to get into download mode. Get the battery out of your phone and put it back after 10sec, Volume Down + Home + Power Button at the same time will get you in download mode.
It happens a lot that the flash is stuck, especially with large files. Changing USB or PC even will solve the problem.
thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !
ericcostes said:
thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !
Click to expand...
Click to collapse
That is fine, MD5 means "one package", so be sure to check One Package and then your .MD5 along with the .OPS and you're good to go. No need for other files.
Thanks Guys !
I could flash my phone with odin 4.43 and 2.3.6 rom .
but the only way to success after many sessions, was to uncheck box " secure OPS file" on odin screen .
thanks a lot
Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???
mr_guitar_eg said:
Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???
Click to expand...
Click to collapse
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!
Jaafar U.K. said:
when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!
Click to expand...
Click to collapse
That's for softbricks only, not really a brick (just something that makes people panic and think they bricked their phone ). Hardbricks are almost impossible as in: go to a service center and hope they will replace or fix your device (without any cost)...
sir, i got a x1 from one of my costumer.. the error is when you turn it on, it will show up till the logo of ericsson then it will auto start, again and again...
also you can put the phone in booth mode..
in booth mode, you will see the 4 colours and
KOVS110
SPL-0.72.0000
MicroP1-707
MicroP2-707
what i did is:
tried to update using seus... but wont connect
soft reset.... still same
hard reset....same
i read and search and search the internet about this till i see the MttY1.42.exe... and snoopyPRO and follow the instruction at XDA about this... but still the same...
download program.. app_sw_x1i_generic_it_kovs_r2aa008
and.. app_sw_x1i_vcom_za_cdf1215-0325_kovs_r1aa017
both of them i flash one by one using micro sd.. the flashing was successfull.. but still the same..
is this phone dead or brick... pls help,
what im going to do to make this phone in use again...
advance thank you very much
pls anyone helpppp.... i need it very badly...pls....
my costumer still not pick up this phone... so lm still waiting for your kind reply..pls....pls...