I tried to update my MDA III and something broke the update and my PC is rebooted itself. Now I try to update my PDA but nothing happens. I get each time "Connection Error" and there is nothing to see on the screen of my PDA. What should I do now? Is my PDA dead? Who can help me???
Related
HELP . I was updating the ROM of my QTEK 9090 and during the procedure the SYSTEM of CLIENT froze and I had to interrupt the updating.
Now I have on the screen of the QTEK a "USB - V2. 07" line and the QTEK doesn't react to any imput.
I tried also the soft reset and the hard reset (soft reset + ON/OFF button ?)
What can I do?
hi,
don't be affraid bro...u entered bootloader mode :wink:
now do the following:
1-download an original QTEK rom from ftp.
2-hard reset ur phone and u ll see serial on the top,bootloader version on the button...
3-put the cradle DIRECTLY into usb port NOT THROUGHT HUB.
4-put the charger in ur cradle.
5-put ur phone in the cradle,u ll see that the serial that was on the top turned to usb,then your desktop/laptop will detect a new device,and install it.
6-reflash with ur original Qtek ROM....
hope i've helped
let me know the results...i would love to help u in case those procedures didn't work
RAGO :lol:
Yes it worked. Thank you very much.
GEOPDA said:
HELP . I was updating the ROM of my QTEK 9090 and during the procedure the SYSTEM of CLIENT froze and I had to interrupt the updating.
Now I have on the screen of the QTEK a "USB - V2. 07" line and the QTEK doesn't react to any imput.
I tried also the soft reset and the hard reset (soft reset + ON/OFF button ?)
What can I do?
Click to expand...
Click to collapse
Hello everybody,
I have a xda iis. So, I tried to update the ROM. When the process is started, I disconnect the usb connection (this is an accident ). And when I reconnect my PDA, and I run the update application, i have a problem :"connection error". In the pda screen, it give me : " USB v2.07"
Plz, somebody can help me to resolve this problem !!
..
I experienced this same problem so many times... that's why, I always keep a backup of my rom in a storage card. just repeat the process and try again.. you'll be safe when your device can still be turned in bootloader mode.
thanks for your answer.
I run the process one more time after many restart my pda. And it works !
thank you borjok536, you're the best
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
felixflo said:
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
Click to expand...
Click to collapse
As long as its getting into Bootloaders (RGB) nothing to worry.
Most probably you have a weak or dead battery,recharge it fully and flash the official stock rom in Bootloaders,it'll recover back,but if the battery is gonner,get a new battery.
thx
now when i try to flash the rom...ERROR invalid update tool
....
Download it
Down load a RUU from the TNT's ROM i think is the better Ruu for wizard but search it men or try the Mun's one!
When i try to flash my PDA, the program run ok but when i got process bar in pc, my pda goes black and then i get the 3 color screen and the flash program gonna crash... i got the same error whit all flashing programs, what can i do?
thanks
sir, i got a x1 from one of my costumer.. the error is when you turn it on, it will show up till the logo of ericsson then it will auto start, again and again...
also you can put the phone in booth mode..
in booth mode, you will see the 4 colours and
KOVS110
SPL-0.72.0000
MicroP1-707
MicroP2-707
what i did is:
tried to update using seus... but wont connect
soft reset.... still same
hard reset....same
i read and search and search the internet about this till i see the MttY1.42.exe... and snoopyPRO and follow the instruction at XDA about this... but still the same...
download program.. app_sw_x1i_generic_it_kovs_r2aa008
and.. app_sw_x1i_vcom_za_cdf1215-0325_kovs_r1aa017
both of them i flash one by one using micro sd.. the flashing was successfull.. but still the same..
is this phone dead or brick... pls help,
what im going to do to make this phone in use again...
advance thank you very much
pls anyone helpppp.... i need it very badly...pls....
my costumer still not pick up this phone... so lm still waiting for your kind reply..pls....pls...