sms logo - PDA2, XDA IIi, 2020i General

this appear's and i cannot get rid of this even after i've read and deleted all sms's, the only way is by soft reboot
any 1 know how to get rid of this without rebooting
Rom Version: 1.11.00WWE
ROM Date: 01/27/05
Radio Version: 1.00.00
Protocol Version: 1337.39
ExtROM Version : 1.11.169 WWE
p.s when u click on the envelope a popup msg say's message sent

Yes, click on the envelope icon in the start bar & select Close option...

Related

NEED HELP FAST! :(

hey all I tried to put the upgraded cam patch onto my XdaIIi and it went wrong and now all the screen says is:
SERIAL
V1.01
whats wrong with it and more importantly how do i fix it?
thanks
put your device to the cradle and run the upgrade proses from your pc. Im sure you can done it.
Thanks
thanks cluster, its back to normal now I crapped myself for a minute
is this right?
ROM version: 1.11.00 WWE
Radio version: 1.04.00
Protocol version: 1337.42
ExtROM version 1.11.162 WWE
Yes, for some reason your device (correctly) went into Bootloader mode, but the process wasn't finished.
It doesn't matter, so long as you run the entire firmware flashing process from start to finish and keep the device in the cradle until it says finished on your PC, you should have no problem.

a big problem in bluetooth on my XDA IIS

PLZ can anyone help me??
a very serious problem :x
every time i turn on my bluetooth on my xda IIs and after 15 seconds it turns off automaticly and gives me a warning window which says :
(( BTTrayCE Sorry ! Bluetooth can no longer be used because the license is expired .
BDA : 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8
i upgraded the rom but the same problem still appears
can u help me please
Which rom do you use ?
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1337.42
EXTROM VERSION : 1.31.139 WWE
there are some thngs that you may do, you may try hard resettng the device (power+reset), or you may try rom upgrade, there are newer roms available
i tried to upgrade to other roms
also i tried the hard reset many times
the same problem
it's a very strange problem
:roll:
you can download bluetooth stack only and install it you can find it in ftp
now i upgraded to rom :
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1.12.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.40.237 WWE
and still the same problem in bluetooth :?
Try tmobile NL 1.42 rom extrom 1.42.119 i am sure it works
i will make simple explaination for upgrade procedure so if you make a mistake we can figure it out more easy
1. download the rom from here
2. extract it using winrar to your computer
3. download MaUpgradeUt_noID from here
4. extract it to the same folder in which you extracted the rom
5. put your device into bootloader mode (pressing power+reset+record buttons at the same time until "Serial" shows on display)
6. put your device in the cradle
7. run MaUpgradeUt_noID.exe
8. after upgrade press reset to leave bootloader mode
that is all
please post if that was helpfull
Thanx for Help But i still have the same problem in bluetooth
now i have this ROM :
ROM VERSION : 1.42.00 WWE
ROM DATE : 09/05/05
RADIO VERSION : 1.13.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.42.119 WWE
Now i'm thinking if it is a hardware problem coz i made all the software solutions .. :?
any way TANXXXX 4 ur Help

Can't Put Call on Hold

The phone alerts me to another call coming in. If I answer the second call, the first call hangs up. I can't put anyone on hold or do a conference. I have gone into Settings> Phone> and Call Waiting to turn on the settings. Any other suggestions?
ROM version: 2.24.10.1 WWE
ROM date: 4/17/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: 2.25.11.102
I am in the US and with Cingular
Maybe it is your provider that don't support this option?
I do know they support this feature so that can't be it. Everyone else I know with this phone also has Cingular and has no issues.

Camera Failed to Initialize

Hi All,
I Upgraded my I-mate PDA2K with the i-mate 1.40.176 rom and now i get and error when I try to use the camera.
Failed to Initialize Camera.
Please Reset Hardware.
36001:100:2
I have tried a soft reset and a hard reset, I also re flashed with T-Mobile UK 1.42.112 and O2 UK 1.40.242 but the problem is still there.
Also the camera button is mapped to Media player instead of the camera I have re mapped this under buttons in settings but if you do a soft reset it losses this and reverts back to media player.
Any help would be greatly appreciated.
Current Config:
Model No.: PH20B
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1.40.242 WWE
Try to upgrade it to wm5 and if you really want stick with wm2003 then you can downgrade.

ERROR 101

Sorry for my very bad english.
I have BA upgraded from W2003SE to WM6 (Helmi BA WM6 R0).
ROM Version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version:
I'm trying to upgrade Radio to 1.15.00:
MaUpgradeUt_noID:
Your device software is about to be update from:
Device radio image version: 1.12.00
To:
Radio image version: 1.15.00
Click update to continue.
and then...ERROR 101. CONNECTION ERROR...Click exit to quit
I'm using Windows Vista and XP. The same message in both systems.
The same problem with this SO roms:
- BA ROM CE OS 5.2.19199 (Build 19199.1.0.0 PV DVH) 16MB PP
- RUU BA xplode WWE 6.10.00
Please, help me....
try to upgrade in "BOOTLOADER MODE".
press record+powerbutton then softreset while holding them. that will give you a "Serial X.xx" and if you plug it in the usb/cradle, it will turn into "USB X.xx"... then try the upgrade/flashing again.
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
entolium said:
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
Click to expand...
Click to collapse
Mine has ever shown any existing version, only shows what the new one will be. All my flashes have been fine. Did you try to continue and actually get an error, or did you stop when it "did't find your pda" ?
Win XP, Activesync 4.5 running
In Bootloader Mode (usb v2.07):
- Run upgrade
"Checking the information in your device...."
"Device CE image version: <empty>"
To "CE image version: <empty>"
- Click Upgrade
"Checking the information in your device...."
...........nothing.......i kill the process in task manager
In normal mode:
- Run upgrade
"Checking the information in your device...."
"Device CE image version: 5"
To "CE image version: 6.10"
- Click Upgrade
"Checking the information in your device...."
"ERROR 101. CONNECTION ERROR"
SOLVED
I'm SOLVED !!!!!!
I'm removed the SD card and ok
im glad you solved it.
just fyi...
you can continue flashing in bootloader mode even if the upgrade software doesnt show your current ROM version, just like Kasush said. it doesnt matter.

Categories

Resources