8125 + iMate ROM = weird audio control problem - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I've found that after I flashed my 8125 with the iMate ROM that if I use my phone I lose all output from the speaker until I soft reset. Obviously something to do with a release of the audio hardware by the phone system. Any thoughts or others experiencing this? It sucks to have to reset phone after every use of phone.

Related

T Mobile MDA III

Recently and unexpected i taught my TMobile MDA III to swim down the pan. After a few weeks of drying out i have coaxed some life back into it, however I have no sound when in general usage, either through the main speaker or headphones.
The problem is after a hard reset there is sound when calibrating the screen right up until the point where the extended ROM is loaded it then goes mute.
However when I either let the battery die to zero by sliding the volume control it beeps and also when I put it in the cradle it produces sound from the volume control and also thru the earpiece.
I had already loaded the latest and last Tmobile ROM upgrade prior to swimming lesson
Any ideas anyone
jimrward said:
Recently and unexpected i taught my TMobile MDA III to swim down the pan. After a few weeks of drying out i have coaxed some life back into it, however I have no sound when in general usage, either through the main speaker or headphones.
The problem is after a hard reset there is sound when calibrating the screen right up until the point where the extended ROM is loaded it then goes mute.
However when I either let the battery die to zero by sliding the volume control it beeps and also when I put it in the cradle it produces sound from the volume control and also thru the earpiece.
I had already loaded the latest and last Tmobile ROM upgrade prior to swimming lesson
Any ideas anyone
Click to expand...
Click to collapse
Have you tried re-flashing the T-Mobile Rom, etc again..?
I wonder if that would make a difference.. What have you got to lose..?
Let me know how it goes..?
Cheers!
yes ... Ill think you must reFLASH your BA ...
i managed to find an old version of the ROM on this forrum and flashed it last night and it seems to be working.
this does not explain why it worked for months with the latest upgrade and then failed following the impromptu swimming/diving lesson, i can see how Greg Luganis felt when he banged his head in the olympics, speechless ??

button still active after power down

Hi tut,
that was a great rom you have made. I am compltly enjoyin it. I am going to do it on my pda 2k too which is running on 2003 SE edition, i bought xda2s because of the low microphone problems in pda2k, noone could hear what i speak- i had to yell,drilled a bigger hole at the mic, still didnt work. I upgraded your WM5 on my xda 2s. works like a dream. Even the speaker icon problem is solved once the handsfree is removed from startup. I have only one problem which is annoying me:
When i select lock all buttons except power - the buttons like mail still do work. It used to happen all the item in the previous mamiach version. Now it happens once every three times or so. Its very annoying as i use the phone in a case and into my pocket and when power it on all kinds of programmes are on and the phone is usually hangs at this time.
Can i use the same patch which is buttons or something like that into your version? Because it did work in the previous version by mamiach.
And do you think mic problem on my pda2k will be solved with this 1.3version? As iv heard that mic has to be replaced or something for it to work well.
Regards,
Varun
Who are you talking to?
Point me to the thread and I'll move this orphan post to its parent.
V
ya i got it...thanks a lot.

Ring problem on Diamond

I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
same problem
i have the excact same problem as you, so someone please respond
same problem
me too, absolutely no ring even after reset !!!
probably a stupid question, but have you got the profile set to automatic?
if so, it will go to silent whenever there is an appointment in your calendar.
If not, then ignore me, it was just an idea...
The profile is set to normal. I forgot to mention this. I would not ask a stupid question like that. Thanks anyway.
i have the same problem. during the day, i must restart my divece, once or twice, because my ring disapear. the microphne too, i don t hear the other person that calls me.today i went to my mobile service provider and i changed my SIM, but the problem is sthe same. i have 1.93 ROM, not cooked, is the default one. when i bought my diamond, the problem exist, when i update for the first time with the previous of 1.93 ROM, the problem wasn t.my phone was work divine.now, with 1.93, the NOT RINGING is backpls hlp me.thnx
Why don't you try a hard reset I am sure the problem will go away....
try the original rom from the htc
try to put the original htc rom 1.93 wwe and it will be work
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
I have this problem but ONLY after listening to music over a bluetooth headset.
I know this maye sound silly, but when you test your phone to make sure it is going to ring, make sure the volume (buttons of side of the phone) is up full.
A few times I have been in 'normal' made, but the phone only vibrates - this is because I have somehow lowered the volume by pressing the side keys.
May save a a few blushes, you never know!
Help
Please guys, help us solve this problem. I dont know what to do anymore, and it is driving me crazy.
Thanks.
I noticed this behaviour on my Diamond last week. Not sure if it is related but I had similar problems on my old Trinity. When switching between vibrate/silent and normal sound profile Windows would not always register this correctly. Further investigation revealed the the system volume was being updated but the phone/ringer volume stayed at silent. Do you often switch between Silent and Normal?
Never got to the bottom of this on Trinity, although it did improve (happened less often) after I flashed WM6.1 over the original WM5. As there seams to be a silimar issue on Diamond I would guess that its either a WM6.1 problem or something to do with the way that HTC's profile switcher interacts with the OS.
Only thing I can suggest as that next time it happens you check the ringer volume either using the Sounds setting (Settings tab on TouchFlo) if its set to 0% then it may be the same thing.
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
I have the same problem. I'm on 1.37 ROM - I only noticed it recently. All other sounds play fine, and the speaker volume is correct and it's not on silent or vibrate.
Phone setting is Ring AND vibrate, but trying Ring only doesn't work either.
I'm disappointed with this phone performance though think it's the Touch Flo. I tried a 1.93 but they took out the transitions - no idea if the ring worked then or not - but it was no faster IMO.
For god's sake a phone which never rings is bloody ridiculous!
I wish I kept on the original Orange UK ROM verison....
I like the idea of a hard reset - but have zero confidence it will work. I do know it will take 30 minutes minimum to set up push mail, apps and all the other stuff again.....
I have a similar problem, posted it HERE
Sounds don't work (ring tones and MP3s), I can't hear my dialog partner and they can't hear me. It's very odd. Only switching off the phone helps. I'm very disappointed with the phone's performance.
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
captainsensible2002 said:
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
Click to expand...
Click to collapse
Thanks for the advice, but I must go on searching for other solutions; because I bought it in UK and I live in Brazil. That's my problem. It must have other solution.
Nothing to do with the volume
Blazeitup123 said:
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
Click to expand...
Click to collapse
The ring is set Ring AND vibrate. The problem have nothing to do with witch volume the sound is set or the profile. And I rarely set the fone to vibrate only.
oh f**king great! I hadn't realised this was an issue and have not only unlocked my ROM but also flashed to a new ROM from the original!
Does anyone in the UK have an experience of returning a handset on Orange where this happened?
I can't find a UK Orange Diamond ROM anywhere but have flashed the OliNex Radio back to a stock HTC one......

HTC Issues

Hi,
I am new to the forum and I recently purchased a HTC TyTN 2 (Kaiser) and have a few issues which i hope that you all can help me resolve. There is no sound on the phone. The ringtones don't work and when I try to play music I hear nothing. The speaker is good since the speaker phone works. Please Help. Also when I take standard photos they do not save neither on the memory card nor the internal memory. It also reacts very slowly to stimulus i.e. programs take very long to load ets. I really need help. Thanks
ArvinSR said:
Hi,
I am new to the forum and I recently purchased a HTC TyTN 2 (Kaiser) and have a few issues which i hope that you all can help me resolve. There is no sound on the phone. The ringtones don't work and when I try to play music I hear nothing. The speaker is good since the speaker phone works. Please Help. Also when I take standard photos they do not save neither on the memory card nor the internal memory. It also reacts very slowly to stimulus i.e. programs take very long to load ets. I really need help. Thanks
Click to expand...
Click to collapse
Have you recently flashed your ROM? Any information like this would be useful...
If so, did you upgrade your radio at the same time - you are probably using the wrong one.
Ta
Dave
1. - What version of the TYTN II do you have?
2. - What ROM is installed?
3. - Was it NEW or USED when you bought it?
4. - Please post your BOOT SCREEN information here as well.
5. - Have you tried yet a SOFT / HARD RESET?
6. - Have you tried to reflash the device with the ORIGINAL SHIPPED ROM?
(Read the TYTN's Wiki to figure out what ROM and for BOOT INFORMATION and also how to perform a SOFT / HARD RESET)
Check as well your VOLUME SETTINGS (Speaker symbol at the top bar).
Hi,
Its the Kaiser (that's what I got from the Device Info). The ROM is new and I haven't flashed it. I ried both a hard and soft reset yet nothing. The speaker settings are fine and still nothing. I assume the device was new. I don't exactly know what the boot information is but these are the things that come up to the bottom of the screen when it starts up:
R 1.27.15.32
G 22.51.88.13H
D 2.02.00.00
hi sorry the last one is
D 3.02.00.00

Diamond sound/microphone problem

hi,
i have a problem with my diamond
people i call, have started to complain about my call clarity/quality lately
they claim that it's quiet, makes cracking sounds and is terribly hard to hear
the device is two years old and worked flawlessly till now
the problem occured suddenly, i had not flashed a rom nor a radio on it for quite some time
lately haven't dropped or knocket it either
i tried flashing a new rom and radio, but it didn't improve
could it still be radio/rom related or do i have a faulty microphone
as i don't have warranty nor do we have a decent repair service, is there a way to repair it myself?
thanks in advance!
i have exactly the same problem, i didn't flashed any rom or radio (i have the latest original). The only thing i changed the last few days is that i installed the SPB Mobile Shell and disabled the touchflo. Can anyone please help?

Categories

Resources