This may be a simple one, but Im stumped...
My Tilt connects to my exchange 2007 server. On other phones running WM6, ActiveSync stays online 24/7. On my Tilt, it goes dormant after a while. I added an exclusive in task manager...
Basically when I grab it after its been idle for a few hours and look, ActiveSync says it was last synchronized at whatever time, I manually sync it, and it pulls down everything and stays online for a while, but eventually it goes dormant again...
Im sure that it's a simple fix, but I can't for the life of me, figure it out....
I have the same problem with mt Tilt. If I use the ATT ROM it works fine but if I move to one of the HTC ROMS I get that problem with Activesync disconnecting from the Exchange server.
I had the same issue on my 8500 with some of the cooked ROMs. On that device the ATT ROM and vp3G's ROMS worked fine (except for one of his; the hybrid I think).
For now I'm just sticking to the ATT ROM and pray vp3G gets a Tilt so he can start making ROMs for our device.
If you don't want all the ATT bloat installed then hard reset and then just hit the soft reset button when it pops up saying it going to customize the device in 3 seconds.
Kaiser connection issues
There are some issues going on with the way the Kaiser pulls emails after it goes to sleep.
Check the thread below or look through this forum for similar topics.
http://forum.xda-developers.com/showthread.php?t=332362&page=4
One of the problems that I've found on this issue is the ActiveSync notifications becoming corrupted. I'm not sure how to go about fixing this, but I downloaded a program called MemMaid that was able to rebuild the ActiveSync notification queue. After I rebuilt the notification queue for ActiveSync my Windows Vista Home Premium and XP Pro systems saw my Tilt and were able to sync again.
Got a little bit of a bizzarre one, when i install BBC (Blackberry connect) to my kaiser (both BIS and BES) the device will function fine, but as soon as i use the email setup wizard it messes things up.
The email connection wizard is using internet explorer.
After i exit this, my internet explorer get confused and wont work!
I try viewing a web page and it pretends to look, but does nothing. i refresh it says complete but does nothing.
Yet ive installed opera mobile and mini, both work ok, getting a data connection at the same time as the blackberry is not an issue.
But i cant figure for the life of me why this email set up wizard has killed my explorer.
I could uninstall blackberry and start again, but my IT department wont be chuffed if i request my BES password again for the third time in a week!
If anyone knows of a way to make the internet explorer work again that would be great!
same issue
Got the same issue - think it might be an issue with the BBC software itself. I tried to view a company internal website - which I think tried to use the BB web browsing connection + hey preso IE doesnt' work anymore.
Exactly the same symptoms - IE pretends to look for a site but returns nothing. Marvellous - glad to hear Opera works - just downloading it now.
John.
I've got BBC (bis) and internet working fine on my Tytn II.
Do you have a seperate data contract for the internet. I think that the connection that bbc sets up is just for emails.
Mind you I only have a BIS account.
So my Blackberry connection is more or less permanently connected and my emails come through as and when. If I then load IE the phone will attempt to connect to my contract internet data connection (should wi-fi not be available) and surf the web.
This all works ok, check your settings for IE to see what connection its using for surfing.
Cheers
Good Evening All
I have been moving form a Tytn to a Tilt.
I am waiting for my unlock code and it will become a Rogers phone.
In the meantime, I have some question.
I am using Dutty's rom. So far it seems nice and smooth. Connection wizard picked up AT&T and its settings with no effort.
I have Exchange push, it does sync up, but does not always stay synced. Also, if I try and use Skype or Slingbox, I get an error that it cannot connect (Cannot connect for an unknown reason...)
Any thoughts?
Thank you!
I changed my settings to wap.cingular rather than ISP.
That seems to do it, although what is odd is that when activesync connects, it works fine, I connect my slingbox, activesync ends, slingbox is still running, I re-run activesync and it stays
Any thoughts?
Thank you!
Dear Forum Members,
Maybe some of you can help me out. Here is what's happening:
The Kaiser's GSM radio is switched on and the unit behaves totally normal. From time to time I sync the Kaiser via AS 4.5/USB with my desktop computer and MS exchange (as well via the desktop computer). After all syncs have been completed successfully I disconnect the USB cable and the trouble starts.
After about 2 to 5 minutes the Kaiser starts to build up a GPRS/UMTS/HSDPA connection to the internet and tries to sync itself with exchange, even though it is not supposed to do so. All exchange settings are switched to manual sync, MS Push is switched off. Disconnecting GPRS results in a re-connection 2 to 5 minutes later. Stopping email programm, Async and connection manager on the kaiser does not fix the problem, the GPRS connection is again established.
Only work around for me at the moment: placing Kaiser next to computer speakers on my desk so that I hear that the phone is showing unwanted activity; if it does: soft reset.
Has anyone any idea what could cause this behavior? As mentioned above, it only happens after syncing the Kaiser with exchange, all exchange sync modes are set to manual.
This really did cost me some bucks while being abroad recently since I did not notice that GPRS was on all the time.
Thank you all!
GZ
Graf Zeppelin said:
Dear Forum Members,
Maybe some of you can help me out. Here is what's happening:
The Kaiser's GSM radio is switched on and the unit behaves totally normal. From time to time I sync the Kaiser via AS 4.5/USB with my desktop computer and MS exchange (as well via the desktop computer). After all syncs have been completed successfully I disconnect the USB cable and the trouble starts.
After about 2 to 5 minutes the Kaiser starts to build up a GPRS/UMTS/HSDPA connection to the internet and tries to sync itself with exchange, even though it is not supposed to do so. All exchange settings are switched to manual sync, MS Push is switched off. Disconnecting GPRS results in a re-connection 2 to 5 minutes later. Stopping email programm, Async and connection manager on the kaiser does not fix the problem, the GPRS connection is again established.
Only work around for me at the moment: placing Kaiser next to computer speakers on my desk so that I hear that the phone is showing unwanted activity; if it does: soft reset.
Has anyone any idea what could cause this behavior? As mentioned above, it only happens after syncing the Kaiser with exchange, all exchange sync modes are set to manual.
This really did cost me some bucks while being abroad recently since I did not notice that GPRS was on all the time.
Thank you all!
GZ
Click to expand...
Click to collapse
did u try some system tool to see what processes are the kaiser runing? Try to see the running processes before and after the sync, maybe the sync starts some process that is causing your problems.
hi guys, i got my Diamond and was very pleased with it, but i got a problem with the Outlook e-mail client...
i've set-up my outlook client to sync with my gmail imap, but i found out that it won't sync with the schedule settings (x minutes) while on stanby mode... a very strange behavior...
but when i turn on the device it will automatically sync with gmail, but the problem is i need to keep on turning my device on & off... it's just like using the manual checking method...
anyone out there having the same problem?
i've tried exchange push mail, it works fine even the device is on standby mode... (the D-pad ring flashes if i got mail pushed immediately)
Getting exactly the same issue, been searching around, but can't find a solution to it at all. If I do a manual send and receive then everything comes through fine.
It sometimes seem to work, but more often than not it doesn't. Anyone have an idea of a solution or what the problem is?
Also does anyone know how to schedule it so it only does it during certain hours of the day?
Thanks
Is there a way round this?
I've now worked out that when the diamond is locked with the screen off, it's effectively in suspend and won't check for e-mails while in this state. Is there a way round this? Think it's a bit silly that unless you 'wake it' it doesn't check for new mail.
or do I need to use push.....
I have the same problem for my other IMAP account as well. Don't know if POP is affected by this.. My screen is not locked when turned off however, it's just... off, stand-by.
We should not have to use push. That truly is completely different. Might this be some energy saving issue?
I've got the same problem! Anyone with any ideas?
was using ROM 1.37.707.1 before,
and now i am just upgraded to 1.93.831.1
in both version my IMAP with gmail worked fine.... sync time is every 5 min, and my phone get the mail even when on stanby....
default settings, even the IMAP settings were set automaticly
I just upgraded to SwiftBL 4.0, which is ROM 1.93.405.1. In that ROM, email works all right, but not fetching mail each 5 minutes in stand-by. When powered on it works flawlessly, it just won't wake up.
not only happens on Google, it happens on Hotmail too, it wont sync until the device is turned on manually from standby mode.
so just upgrade to 1.93 this issue will be resolved?
Nope, as I just said.. I'm running a 1.93 ROM, it does not work.
In fact, I did a test on this issue by removing the TF3D interface, unfortunately, the problem remains with and without TF3D. Most likely this is caused by the WM itself.
p.s. running 1.37 atm
It's a known issue and has been discussed a few times already. Sometimes it works, but it's not clear when.
I've tried other email software, but I did not really find a good one. I also tried Emoze and Emansio. Both do not support sub-folder. Emansio works perfect (also in stand-by) but it's not cheap.
So, I'm still searching for a good solution
I suffer the same.
I got to a point were I think I should decide when I have time to read my email, so I put in on Manual sync.
For some time ago I thought it was kick ass that mail got in to my Diamond automatically, but I do nothing with it.
Now, when I have some minutes, I sit down and check my mail Safes battery and my time
the best solution should be wait for the ROM fix I believe..
i've upgraded my rom to the original 1.93 (HK english) & found out that the e-mail for gmail imap is working perfectly...
i've tried to use it for a day, i even turned off my push mail to see if it really works...
it's doing fine for now, i set it to receive every 30 mins, so far i haven't got any delays or miss emails...
How do you lock your phone?
I found after upgrading to 1.93 it seemed to work fine, but I was using s2u2 at the time. I uninstalled this and now use the built in lock to come on automatically when I turn the screen off. Now it does not check for e-mails at all. Is there a setting to stop this or another locking app which won't stop e-mails from checking - I found s2u2 draining the battery so don't want to go back to it.
What one needs to have push email working on Diamond. I have 2 Gmail IMAP accounts that want to be pushed to my mobile?
EazyVG said:
What one needs to have push email working on Diamond. I have 2 Gmail IMAP accounts that want to be pushed to my mobile?
Click to expand...
Click to collapse
Push email and IMAP are two different things.
To have Push email, you need to have Exchange Server, which has Push email functionality.
Give yerself a break, get email once in 15 minutes.
I have got rid of the eager of getting the mails immediatedly: I mostly don't have time to answer anyway.
I know have set it to once in an hour! In weekends once in 4 hours. I myself make out when I want to read my mail, that's why push-email has been disabled here
Saves battery too