o2 upgrade xda mini s problem........blue screen frozen - 8125, K-JAM, P4300, MDA Vario Software Upgrading

hi.
i have just upgraded and i have restarted the phone. and all i have is the blue windows mobile screen. its locked.
it has completed the upgrade process.
i have the battery meter in the corner, with the sound icon.
HELP PLEASE
how can i get around this.
the phone wont now sync to my pc.
any ideas guys

Press Comm Manager button+Voice Command Button and Soft reset,,by releasing the sylus first with the two buttons pressed, till u get a message on the screen.The press the green button which tzkes the incoming call...Post here what happens after that

Related

Strange FLipping PHONE buttons

Recently I am experience and incredible fact.
The green button to start a call NOW works as CALENDAR shortcut button (yes like the top right button)
The red button to END a call NOW works as CONTACT shortcut button (yes like the top LEFT button)
The 2 Contact and Calendar button (top left and right) DO work correctly.
I supposed some recently installed applications made this mess. Therefore I tried
- soft reset: no way
- hard reset: no way
- I PUT MDA 3 in BootLoader mode and I REINSTALLED MY rom 1.42 WWE
Now what happened is that for 2 days OK, the GREEN and RED button DID work correctly to start and end CALLS.
After 2 days, the strange phenomena appeared again!
Please note that I HAVE NOT INSTALLED ANY ADDITIONAL SOFTWARE!
I am very puzzled.
Please help
Saulo
Any suggestions
Any suggestions
I am getting crazy at this behavour...did i get a virus?
Thanks and waiting
Saulo

Is my wizard totally bricked?

hi, please! need help... after I've flash the
Wizard_Love_2.26.10.2_WWE_Novii_CF2 on my G3 device the rom is very slowly and my PC doesn't recognized my wizard when it connected with the USB cable.
any solution how can I change this rom?
many thanks
i can go to the tri-color bootloader mode, is it say somthing?
mine did that yesterday....maybe try a hard reset:
Hold down the Comm Manager button(top left) and Voice Command button(top right) buttons while performing a soft-reset (depress the reset button using the stylus); after you depress the soft-reset button, [contintue to hold the two side buttons] hold down the navigation pad for ~4 seconds until you are prompted on screen [you can release the side buttons now]. Press the Send (Talk) button (i.e. the left telephony button) - or whichever button your system prompts you for.
That's what I did and it worked for me =)
thanks but it doesn't work, the main problem is that after the hard reset the rom is very very slowly (like 7-8 seconds from the moment you tap the "start" till the start menu come)
the PC doesn't recognized my wizard so i can't change to another rom....
I can get into the tri-color mode, does it say that maybe it's not bricked?

Kaiser aka TYTN2 turn off problem

Hello there!
I have a weird problem with my Tytn2. When i try to turn it off by pressing for 5 seconds the power button, it displays on the screen the regular message, that power will be turned off and i may lose data if not saved. Press ok and the power seemes to be turned off completely, because the green led won't flash. But, when i press the power button trying to turn on the device, it doesn't boot for entering the system, it just suddenly display the Orange Logo and above it a tiny black bar with the proper icon showing me that i have no phone signal at all (see picture). By pressing the "x" in the right side of the bar, the logo dissapear and appears the home screen, but the same icon is showing that i have no signal at all. I have to go to the comm manager, press once the Phone symbol which is already blue (enabled), and it sticks on the Flight mode. Press once again the Phone, and i have phone signal. The fact is that the phone it doesn't turn off completely and it hangs in a weird state (sleep mode ?). Please help me if you can! Thank you very much !
Hard-Reset your phone.

[Q] No Hard Reset

My HD7 is stuck on the start-up HTC screen. If left for a few mins. it goes to the screen showing Phone- USB cable -PC and thats it.
I tried hard reset: volume up/down held down + power on/off. No matter how long I hold these buttons down it does not go to the boot loader screen, infact it goes to the same screen as mentioned Phone-USB-PC.
When I hold down volume button + camera +power on/off the tri-colour screen appears for a few seconds but then does to the white screen saying "Enter USB Host Mode"
Zune comes up with error C101002E and trying to flash it with O2 rom the error 260, no comms
Can I do anything to restore this?
I've just found out it has no memory card! Would this stop it from booting past the start-up screen?
Yes I bought it as faulty, so I thought a reset would do it. Its not dead, far from it but I just need pointing in the right direction
Hold volume up + down at the same time and click power once while continuing to hold BOTH volume buttons...
If that doesn't work and u haven't hacked ur fone ibwould call for a replacement .... I'm sending mine back cuz mine is constantly freezing and rebooting by itself
Sent from my HTC Glacier using XDA App

[Q] My Z1 is completely DEAD

A few hours ago i try to Hard-Reset my Z1 because it keep restart it self while im using it. After i press ERASE ALL DATA or something like that buttons the phone went off and start again with android logo on it with some loading bars underneath. After a few minutes the screen went off, the phone restart and stuck on the booting screen. so i tried to manually restart it with long pressed on power key, didnt work so i use the OFF key in side the sim tray panel. It work and the message Android is Upgrading appears. Optimizing Apps 1 of 3. After it go through 3 of 3 the phone restart again. Same thing appears but the "1 of 3" turn into "1 of 2" AND then it repeat with 1 of 1 apps message. the screen went off again then boom! it's dead. No LED lights, cant turn the device on, charging doesn't work, PC Companion cant detect the phone. I try the "Repair device" options but still not working. Power key+Volume Up doesn't work, OFF key in the sim tray panel doesn't wok also.
Anyway i can do to bring it back?
Ps.Sorry for my bad English

Categories

Resources