Hi Folks,
I'm having a... strange situation here. I have my G4 CID-Locked Wizard for 2 weeks (I'm in Brazil), and had the original Qtek ROM (from Tim Brazil, Brazilian Portuguese).
Reading the forum, I decided to upgrade the rom to WM6 MB Edition, using ShellTool and the nice tutorial found in the forum. Everything worked quite right, and I was a very happy user of the new WM6. Except that the MB rom was freezing every now and then.
Reading the forum (again, you guys are the source of my problems, hehehe!!), I saw that Faria release his own ROM, with lots of goodies. So, using shelltool again, I tried upgrading... except that this time my device froze on the IPL/SPL screen.
Being very calm and prepared, I flashed the previously downloaded Wizard Love ROM using the bootloader (holding the camera button) and, despite the splash screen, everything returned to normal. Except that my keyboard, although configured to Brazilian Portuguese on the registry (0416), is not performing perfectly as it was with its original ROM or the MB ROM.
So I tried to flash Faria again. It froze again on the IPL/SPL screen. After flashing Wizard Love again, I tried flashing MB ROM again. No deal, same problem... device frozen on the IPL/SPL screen. So I downloaded the original Qtek 9100 ROM from ... well, the net. Same issue.
It looks like the only ROM that works now on my device is Wizard Love. Why is that? I would love to try Faria's or Molski's ROM, but seems like my device has "fallen in Love"
BTW, I'm a novice on this and searched a lot on the forum. If anyone here could help me, I would be very thankful.
IPL/SPL: 2.22.0001
GSM: 02.25.11
OS: 2.26.10.2
BTW, if anyone has the original Brazilian Portuguese ROM for the Wizard, I would be very thankful too.
Cheers,
Eduardo.
EduardoFonseca said:
Hi Folks,
I'm having a... strange situation here. I have my G4 CID-Locked Wizard for 2 weeks (I'm in Brazil), and had the original Qtek ROM (from Tim Brazil, Brazilian Portuguese).
Reading the forum, I decided to upgrade the rom to WM6 MB Edition, using ShellTool and the nice tutorial found in the forum. Everything worked quite right, and I was a very happy user of the new WM6. Except that the MB rom was freezing every now and then.
Reading the forum (again, you guys are the source of my problems, hehehe!!), I saw that Faria release his own ROM, with lots of goodies. So, using shelltool again, I tried upgrading... except that this time my device froze on the IPL/SPL screen.
Being very calm and prepared, I flashed the previously downloaded Wizard Love ROM using the bootloader (holding the camera button) and, despite the splash screen, everything returned to normal. Except that my keyboard, although configured to Brazilian Portuguese on the registry (0416), is not performing perfectly as it was with its original ROM or the MB ROM.
So I tried to flash Faria again. It froze again on the IPL/SPL screen. After flashing Wizard Love again, I tried flashing MB ROM again. No deal, same problem... device frozen on the IPL/SPL screen. So I downloaded the original Qtek 9100 ROM from ... well, the net. Same issue.
It looks like the only ROM that works now on my device is Wizard Love. Why is that? I would love to try Faria's or Molski's ROM, but seems like my device has "fallen in Love"
BTW, I'm a novice on this and searched a lot on the forum. If anyone here could help me, I would be very thankful.
IPL/SPL: 2.22.0001
GSM: 02.25.11
OS: 2.26.10.2
BTW, if anyone has the original Brazilian Portuguese ROM for the Wizard, I would be very thankful too.
Cheers,
Eduardo.
Click to expand...
Click to collapse
Save yourself some grief and CID unlock your phone.
--M
I had issues using ShellTool and the Fariah ROM on my locked G4. Once I got it unlocked, the Fariah ROM flashed flawlessly.
Dave
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
michielc said:
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
Click to expand...
Click to collapse
Shelltool only flashes the OS part of the DOC chip, not the splashes...
mestrini said:
Shelltool only flashes the OS part of the DOC chip, not the splashes...
Click to expand...
Click to collapse
Is it possible to replace the splash screens with the screens of the rom that I'm trying to install on my Wizard ?
Hi all,
I tried to upgrade my MDA compact II (HTC Charmer) to WM6, but during the first step, downgrading to the "no vendor" version I made a mistake. A used a wrong version, it was for Prophet. After the final reboot, the device froze in the splashscreen "T-Mobile". After that I tried to do exactly the same with a "Charmer" version, but it didn't help me, the situation was the same.
However, now I'm able to flash successfully only the last vendor provided ROM update "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe", but it doesn't help me anyway, my Charmer is still freezing in the splashscreen. I tried to downgrade it , but the application gives the following error: "UPGRADE ONLY". When I try to make a hard-reset, and after that to confirm the factory settings by pressing "Yes" (green) button, the result is "Format FAT partition" and then "format is failed".
Only the bootloader is working now as well as the battery charging. Please, help me to turn back to the life my Charmer!
And one additional question: can I perform a CID unlocking just by ROM-flashing or the device must be fully operable?
Flash this:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
After that, you should be able to make hard reset. If you succeed, flash "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe" - that.
Hello there,
I am a new use an recently got an MDA PM200. I am in exactly the same situation as petrun. I have tried the flash suggested by vlodeck but it doesn't work, saying incorrect vendor ID (I guess that's because it's for a Prophet?).
What should I do next...?
Thanks.
OK, I succeed with a little progress. Many thanks to vlodeck, I will try to explain what happend...
I successfully flashed my Charmer with this Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Full link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
But it was possible only by using this "No ID" update application, not original one, maybe because my device is still locked:
Full link:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
After that I succeed to format the FAT partition (finally ). But I cannot after all to flash the latest official MDA compact II firmware. There is two possible events, which I experienced:
1. When I try to use the original flashing application, I get the following response: "UPGRADE ONLY".
2. When I try to flash the official MDA compact II ROM, but through the "No ID" application, I get "INVALID COMMAND".
Just for explication, now my device cannot boot, it freezes in the splashscreen (it is Qtek now, not T_Mobile...) and the following versions could be read:
IPL 2.06
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
So, how I can do that? What should I do further? I would like to unlock my Charmer, but should I firstly make it operable?
Thanks in advance for your help, guys!
By the way, all described above I tried sevetal times with the same result.
The other thing is that... all links about the CID unlocking downloads, which I found here are no longer active. Any alternatives?
Rise from the dead!
Incredibly, but it's a fact! After successfull FAT formating I probably didn't wait long enough. Today I turned on my Charmer and several seconds after the splashscreen "QTEK" it successffully booted in WM5, performed all settings and finally started to work!
It's GSM module works, the Bluetooth works, I am able to start different applications. Just the camera does not work. And the most strange thing for me is that this ROM was for Prophet, not for Charmer
So, after all, how to proceed to upgrade to WM6? Now the bootloader is above ver.2.
Should I firstly flash it with proper ROM (for Charmer) or it's not necessary?
Should I unlock it as is now (Prophet ROM)?
Vlodeck, I rely mostly on you, since the WM6 with Touch FLO is your creation.
Thanks!
You dont have to CID unlock. Just flash that WWE T-mobile WM5 AKU2 for Charmer. Good luck.
Maybe I am boring, but steel need an advice: I cannot flash "WWE T-mobile WM5 AKU2".
1. The original RUU gives me "UPGRADE ONLY", maybe because my SPL after flashing the Prophet ROM is 2.20
2. This "NO ID RUU":
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
reaches 2% and gives "INVALID COMMAND", after that - only bootloader screen.
3. This "NO ID RUU":
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
cannot open the nk.nbf image (but works with other images), I don't know why.
What is the solution? Any ideas? Maybe some tool to downgrade the SPL to ver.1? I tried (it perhaps was bad idea)"RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" and IPL became 1.12, but SPL remained 2.20... and Charmer didn't boot after that. After flashing the Prophet ROM it works again and IPL is 1.12, SPL is 2.20
In brief... how to flash successfully the last Charmer ROM?
If you cant flash the AKU 2 charmer rom, then go for AKU3.3 rom (can be german, that doesnt matter). Once done that, flash wm6.
Success
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
petrun said:
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
Click to expand...
Click to collapse
WHERE I CAN GET BOUTH FILES cert_spcs.cab and enablerapi.cab
AND WHAT VIRSION OF PROPHET ROM SEND ME WORKING LINK THX DEAR
Charmer Stuck At Splash Screen
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
MDA2 CANNOT CONNECT WITH ACTIVE SYNC
Of course it cannot connect with ActiveSync, the device doesn't boot. One certain solution for bricked Charmer is Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Use this link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
In order to flash this, you should enter the bootloader, without using the ActiveSync. After that try to perform a hard reset, you probably will succeed to format the FAT partition.
if you cannot connect the pda to pc HOW CAN U PUT THE ABOVE PROPHET RUU ON CUREENT?
I have a charmer and I was trying to update to wm6. I can´t because the ipl is 1.12. I updated rom to german aku 3.3. But I can´t hard reset. format error. I´m trying to put prophet rom to format it, but when I send the prophet rom, it always give me an error at 95%. error 326 - this nbf file cannot be used fo your pda phone. please check your nbf file. the aku3.3 rom flashes ok. any idea?? I try tu send a radio rom. after that is the same. 95%error. please help. I can´t bring my charmerback to life.
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Yallah said:
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Click to expand...
Click to collapse
same problem here... any suggestions or is my charmer bricked?
Hi all,
i have a big problem flashing a new wm6 rom to my wizard. The wizard is CID unlocked following the How to flash a new ROM to your Wizard... a little tutorial! tutorial.
I had 2 WM6 roms on my wizard - 1 of them was WM6 crossbow, which i used a couple of months - both flashed w/o any problem and worked perfectly.
Last day i decided to flash the TNT touch flo rom but the install wizard ended with error on 99%, then i tried the TNT professional + home - same result, then i tried to flash the crossbow rom - same result. Then i returned to the unlocking howto - and followed it again but i can not flash wizard_love rom (ands at 98%) and Xda_MiniS_LaunchROM_v154102 (ends at 85%). I tried the whole procedure many many many times... but unfortunately the only rom i can flash w/o any problems is the t-mobile rom. Nothing else works...
Any help is highly appreciated!
Thanks!
succsess flashing new rom to my wizard
Hi All,
i tried to flash WRCX 2 (TouchFLO) after i flashed the t-mobile rom and i had success!!! I have it now running w/o any single problem .
As i posted above i tried the whole procedure with many other WM6 roms without luck ...
I am wondering what could be the problem here ...
My Qtek 9100 is dead after flashin new rom
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
cimi said:
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
Click to expand...
Click to collapse
Try to get the phone in Bootloaders (multicolor screen) and flash the Rom with 'RUU_Noid' utility,you can search for this in the forum or read this thread :-
http://forum.xda-developers.com/showthread.php?t=291215
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
PCServe said:
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
Click to expand...
Click to collapse
not many details, but let's see
you successfully flashed h-spl (from olinex thread)? and when trying to flash custom rom you get the error 260? that right?
ensure to use customruu for flashing and not the ruu (hardspl.exe) from h-spl thread
if you use sd for storage of rom image, why not flash using sd-method in the first place?
a newer german rom is here