Database Develop

Help:After Upgrade Can't Power On

Cingular 8125 (IPL/SPL 2.25.0001), SIM/CID Lock!
I used Lokiwiz03 to unlock the SIM, Success!
I download the dopod chinese rom to upgrade,after upgrade,can boot once in chinese rom. i found IPL change to 2.25, but SPL no change.
Afer i reset the phone, it Can't power On,no respond!
anyone can help me?

you bricked your wizard by flashing g4 unit with g3 ipl/spl. now you can throw it out or send to me (this is impossible to repair - maybe in future Jtag will help but it takes years?)
please - read more in future!
(sorry for my english)

My 9100 died :-( Help Me pls

I was trying to upgrade my ROM to G4 CID unlock my device. For some reason, i cant load the OS my phone, and when i turn on my phone, i stay in the bootloader, with IPL and SPL in 2.26.
What i can do? I'm diperate Help Me pls...
Thanks

Hi
its not dead if you still have a bootloader! all is not lost!
what you need to do is download the official update for the phone, the OFFICIAL t-mobile/cingular or qtek one
boot the phone into bootloader mode
plug the phone in
run the update as normal just let it go through
and all should be good!
good luck!

Thanks Duke...
where i can found the official update and how i can boot the phone into bootloader mode?
Thanks again

which rom i have to use ?
and where i can found it? on phone bootscreen i can see this:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
someone can help me ?
Thanks

if your phone is a g3 try the tmo uk
if you had a g4 try the wizard love

where i can found this roms ?
Thanks

tell me if your phone is a g3 or a g4

it's G4 I think

sure
croccolo said:
it's G4 I think
Click to expand...
Click to collapse
the ipl and sol that you write is for a g3
there is the link
http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html

I have a G4 Qtek 9100 right? Think I bricked it :/

Hey there!
I was going to upgrade my Qtek 9100 to some nice WM 6.1 version here and I followed the guide but I forgot to check my IPL/SPL, I only checked my version in the 9100 and it said 2.1 xxx so I thought I had an older version that wasnt G4 but when I ran the downgrade rom and the update application said something about that I had an old update utility. My 9100 rebooted and now it has hanged at the update screen and it says IPL 2.17.0001 and SPL 2.17.0001 which means its bricked and there is no way of ever getting it to work?

HOWA !!!
You are just one lucky guy,if its stuck on bootloaders (tricolor screen) with ipl/spl displayed,then you just got saved.otherwise,it shud have 'Bricked' the phone.As long as it gets into bootloaders (tricolor),its safe. Always remember,you cannot downgrade or SIM/CID unlock a G4 device like this as a G3 device,infact,a G4 device can not be cid unlocked at all.If you want to upgrade to a wm6 rom,read and follow the guides in G4 forum 'Stickied' as 'HardSPL' and 'SoftSPL'.
Now to recover back,download the official carrier's rom from its website or download the wizard_love_rom and flash it in bootloaders,it'll recover back and start to work,and then go for upgrade as per guides mentioned above.
Cheers!

Hehe nice to see I have luck sometimes! It was the 0001 that certified that I had a G4 right? Thanx for the tips!

wizard stuck on bootloader

hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...

Piechcio said:
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Click to expand...
Click to collapse
Download official stock rom of your carrier and flash it in bootloaders to recover back to its default working status,then if its a G3 phone, downgrade to ipl/spl 1.xx by flashing Button's Rom and SIM/CID unlock with lokiwiz02b,but if its a G4 ,it cannot be CID unlocked but can be upgraded to wm6 through 'SoftSPL' or 'HardSPL'.

HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please

jalalkarimi said:
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
Click to expand...
Click to collapse
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744

zabardast_1 said:
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
Don't use those ROMs as they are for G4!!!
If flashing original ROM doesn't solve the case then you'll have to buy the unlock program from IMEI-check company.

Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all

jalalkarimi said:
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
Click to expand...
Click to collapse
No. the problem is simply of messed up firmware. I believe that the SPL tries to load the OS but it must be at a different address and never starts to load.
The IMEI-check tool will simply CID unlock your device. You still have to do the "r2sd all" procedure...
good luck

downgrade spl 2.17 to 2.16

i have an i-mate that was flashed with a custom rom in an unofficial service center with an ipl / spl 2.17 , i need to restore it to official i-mate k-jam rom which is 2.16 however the updater utility states its unability (probably due to spl reported to be higher than rom) is there a way i can bypass that or even downgrade spl ?

If you have a G4 phone. Try this unremove HardSPL trick to change the IPL/SPL in your phone. This is how I have gone from 2.25.0001 to 2.26.0001 to 3.08.0001 in my phone.
You will need to find the IPL/SPL you want. Be careful about G3 versus G4 versions.
http://forum.xda-developers.com/showthread.php?t=342744
If your phone is G3 someone else will need to help you.

thank u , its a g3 and i could help myself by installing button rom , later i had a problem where it downgraded ipl but not spl , finaly i realised they neglected to mention one thing .... u need to restart after installing rapi before cid unlocking , and then reinstall button rom