i have a big problem. I tryed to install Xda_IIs_v131139_upgrade and then the message error shows :'' error 114 : radio rom update error ''
after that screen shows : serial and at bottom v2.07. i tryed to install again but the same problem shows up
What can i do ? xda iis is from UK ( O2) !!!!!!!!
i also have card reader and 1gb sd card if that helps to fix my problem
i have a big problem. I tryed to install Xda_IIs_v131139_upg
u have to edit the "RUU.conf "open it with notepal & add in "[CHECKCEID_TYPE]=1 " after the "[RADIO_FLAG]=1".
i have a big problem. I tryed to install Xda_IIs_v131139_upg
u have to edit the "RUU.conf "open it with notepal & add in "[CHECKCEID_TYPE]=1 " after the "[RADIO_FLAG]=1".
I have the exact same problem on a SX66. Added [CHECKCEID_TYPE]=1 like you said and still have the problem. During the update there is a long pause at 1% then it goes up somewhat quickly, skips 10% goes right to 11 and then to 12%, long pause and then the 114 error. I've tried many different radio files and get the same on all of them.
I have downloaded Terra Term to backup my MDA to SD card but I dont see any USB option to connect and I have used mtty.exe and with that when I use USB connection and hit ok it get an error message saying that " USB port can not open" can anyone help me dowloading the correct version or suggest me what to do.
Hi
I have recently updated the firmware on my n7000 from 2.3.6 to 4.0.4 and ever since I have not been able to make calls or go on internet
Network - unknown
Service state - Out of service
Mobile network state - Disconnected
Next to my battery icon top right of my phone I do have 4 signal bars which change from time to time displaying 2 or 3 or 4
the MD5's I have tried using ODIN are
N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar.md5
N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5
Vodafone have confirmed it is NOT blocked by IMEI
What can I do to determine if it is infact blocked by EMEI
Thanks
EFC
you can check your emei, in your phone, settings, about phone, then status. Is it the same as when you bought phone?
you can check your apn settings, are they as provider prescribes?
When reboot does your phone ask for sim pin?
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
you can check your emei
you can check your apn settings
When reboot does your phone ask for sim pin?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
No sim pin
How do I check emei and apn??, is it a classic sign of emei block when not registered on network??
nope if phone doesnt ask you to authenticate sim pin, then it wont register on network.
Fix is easy, try this
http://forum.xda-developers.com/showthread.php?p=25953317
Added how to check emei, dial *#06#, is another way. If its original, see behind battery then thats not issue.
Apn, I'll go into that after you tried Lance Uppercuts method and rebooted
Sent from my GT-N7000 using Tapatalk 2
I found the apn settings and enabled use packet data, data roaming, clicked on access point names and ha 1 listed which is 3 so i selected that
network mode is set to gsm\wcdma auto mode
network operators.........searching........for ages!! then i get
3
3
vodafone uk
02 - uk
t-mobile uk
clicking on either of the 3 networks says........unable to connect try again later
switch data roaming off, youbmight get extra costs. Apnbsettings should match your providers.
If lances method didnt work after reboot, see post above, delete apn, reboot, register on your mobile network, check apn with providers, or have provider resend it. Some times you can do this yourself from providers website
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
nope if phone doesnt ask you to authenticate sim pin, then it wont register on network.
Fix is easy, try this
http://forum.xda-developers.com/showthread.php?p=25953317
Added how to check emei, dial *#06#, is another way. If its original, see behind battery then thats not issue.
Apn, I'll go into that after you tried Lance Uppercuts method and rebooted
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
i have to be rooted to follow this, wat is quickest method i dont have a sd card installed
- Download "Terminal Emulator" app from market
- open it
- type into the command:
su
echo -n ON > /efs/imei/keystr
sync
Go to home, force close your terminal app, shut your screen off, and when your turn it back on your lock screen should be there.
Obviously you must be rooted the "su" command.
can someone pliz elaborate on typing su into the command
i have /$ when i type su it shows
/$su
The selected command does not exist
just download the one with busybox and try to install it from stock recovery http://forum.xda-developers.com/showthread.php?t=1841288
use update zip option and save it on internal sd Should be pickable.
Remember your on unsafe kernel, dont wipe factory reset at all.
Getting into recovery is tricky: switch off phone, immediately
volume up, home button and power button at the same time keep pressed and after reboot its in recovery mode. Navigate with volume buttons and confirm selection with power button
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
just download the one with busybox and try to install it from stock recovery http://forum.xda-developers.com/showthread.php?t=1841288
use update zip option and save it on internal sd Should be pickable.
Remember your on unsafe kernel, dont wipe factory reset at all.
Getting into recovery is tricky: switch off phone, immediately
volume up, home button and power button at the same time keep pressed and after reboot its in recovery mode. Navigate with volume buttons and confirm selection with power button
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Downloaded it and installed as you said
The program Terminal Deluxe tells me that it has been granted super user permission when I start it
But it still says...
/$su
The Selected command does not exist
I am simply typing the first line "su" straight after the "/$"
Is this correct?
Just to add more info
I put a Vodafone SIM into this phone and it got an E data connection but no calls
Whereas when I put my 3 SIM card in I get no data or calls
Does this give any clues????
press 'enter' on your Note's keyboard... Everytime you type something on the Terminal Emulator app, you have to press enter after.. (just like what you would normally do on Windows Command prompt (DOS) mode option.
letters_to_cleo said:
press 'enter' on your Note's keyboard... Everytime you type something on the Terminal Emulator app, you have to press enter after.. (just like what you would normally do on Windows Command prompt (DOS) mode option.
Click to expand...
Click to collapse
I dont have an ENTER key on my note keyboard, I do have a DONE button which is what I am pressing
if pressing DONE accomplishes the same process of executing the command 'SU' then that's all good still.
So where you able to execute the other command after 'su'?
letters_to_cleo said:
if pressing DONE accomplishes the same process of executing the command 'SU' then that's all good still.
So where you able to execute the other command after 'su'?
Click to expand...
Click to collapse
No because SU is the first command and it says "The selected command does not exist"
EFCLEE said:
No because SU is the first command and it says "The selected command does not exist"
Click to expand...
Click to collapse
I was able to enter the other 2 commands but after a reboot I still cannot make calls
This regard my earlier post.. can you see your IMEI already under phone settings?
letters_to_cleo said:
This regard my earlier post.. can you see your IMEI already under phone settings?
Click to expand...
Click to collapse
about phone - status - imei YES
how about sms are you able to send one? let me get this straight then.... your current issue is
1. You can't make calls and
2. You don't have data connection?
am I right? Do you see the signal bar on your phone?
letters_to_cleo said:
how about sms are you able to send one? let me get this straight then.... your current issue is
1. You can't make calls and
2. You don't have data connection?
am I right? Do you see the signal bar on your phone?
Click to expand...
Click to collapse
No calls, when try "phone not registered"
No data connection, although if I had a vodafone sim I would get EDGE
I do have signal bars that do change, but I have these when sim is in or out? weird!!
Hi, I want to update my phone to the sense 6, but whenever I try to install an RUU, it always gives me an error. Through fastboot oem rebootRUU, it gives me the 32 header error and it doesnt even recognize pn017img.zip (whatever it is) when I download it through my phone and transfer it over via es file manager, because I can't copy anything through the USB, it always gives me "the device has either stopped responding or disconnected" This is getting real annoying, any help is appreciated.
I have just inserted a new sim card into my Z3C running Slimm 1.7, and it requested an unlock code. I used the following sequence to get some data -
1. Turn on the phone without sim card
2. Type *#*#7378423#*#*
3. Select Service info
4. Select SimLock
But all the entries say "Unknown error"
What can I do?