Related
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Michalek said:
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Click to expand...
Click to collapse
Make sure that you have unlocked the device correctly. Read Dr. P's sticky:A Definitive Guide to Unlocking G3 Wizards and also the wiki.
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Michalek said:
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Click to expand...
Click to collapse
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Now Unlock your device BEFORE flashng a 2.x Rom.
Dr P's Sticky Thread covers this, please read it throughly..
kyphur said:
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Click to expand...
Click to collapse
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
kyphur said:
Now Unlock your device BEFORE flashng a 2.x Rom.
Click to expand...
Click to collapse
I can't unlock my device, because I haven't OS...
kyphur said:
Dr P's Sticky Thread covers this, please read it throughly..
Click to expand...
Click to collapse
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
When all else fails, flash an official Rom from your Service Provider. That should get you back to working order then proceed with the unlocking from there.
Michalek said:
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
I can't unlock my device, because I haven't OS...
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
Click to expand...
Click to collapse
When I say "Connect your device" I mean to connect it to the USB cable. Two paragraphs after item 17 I address this issue. You don't need an OS, just be in the bootloader screen. I've personally had this exact same thing happen where all I had was the IPL and SPL with nothing else. Remove battery from PDA and then put it back in. Make sure you reboot your PC.
Good luck.
When all else fails, flash an official Rom from your Service Provider.
Click to expand...
Click to collapse
good idea, but it doesn't work; because "upgrade only" - My originally T-Mobile ROM is only 2.21, so I can't flash it
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM This will give you a strong 2.26 IPL and SPL to work with.
Click to expand...
Click to collapse
Invalid Vender ID.
But I can flash MOLSKI ROM with 2.26 IPL/SPL. Should I?
==
For everyone: Thanks for your time, really. But I'm confused, I read all, nothing helped.
Let's say: "Michalek is very stupid, we'll write him "what to do" step by step" ) something like "You asshol, connect your mda in bootloader to pc via usb, then download this, run it, then ...".
Because manual doesn't work for me, probably.
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Michalek said:
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Click to expand...
Click to collapse
Good to hear you are making progress, let us know how things turn out!
--M
-Michalek- Well that's wha we like to hear! The 1.05 works great as a disaster recovery tool. Most times when it doesn't work I tend to lean on the PC as the culprit. CHKDSK, temp files, spyware and virus's, etc.
Happy New Year, no?
Don't feel stupid
I'm glad it's working for you! Don't feel stupid though. My first attempt at loading a new rom went very similar. The CID unlock process told me it was successful (I thought) but it wasn't. I freaked out and thought all was lost. But I finally worked through it by going back to the Button ROM (LOVE THAT BEER SPLASH SCREEN) and starting over. The same problem even happened again about three weeks ago. After freaking out, I reloaded the Button ROM and was back on my way to normalcy
MDA is running on Superrom 1.1 and it works!
I don't know, what exactly was the problem with OS, but it helped me, when I left MDA cca three hours without battery. When I flashed the ROM before, OS wasn't.
At the last time, THANK ALL OF YOU VERY MUCH. And special thanks for Dr Puttingham and his unlocking tutorial. Thanks.
my t-mobile mda compact got hanged at the bootloader mode(3 color mode) while upgrading to wm6 rom.i had done everything as told in vlodeck's thread about upgrading to wm6.but got stuck in 3 col mode.also tried to glash it with t-mobile official rom.but its giving me an connection error while upgrading.my 3 color mode displays only following text
IPL 2.06.0001
SPL 2.06.0001
PLZ PLZ HELP ME GUYS iam a newbie to this forum.plz plz plz guide me to get it back to my wm5 today screen.i had seen xda-dev's solving problems of many members.plz solve mine as well
can you explain more? what happen after u got stuck while upgrading to wm6? then what did u do when u trying to flash it back to wm5?
i tried to upgrade it with wm6 from wm5.it got stuck at bootloader mode givin the above info(ipl....)i tried the wizardlove rom.it did worked,but with no sound and constant battery error even if my battery is 96% charged.what should be done to it now .and fikri bhai,thnx a lot for ur concern.guide me more if u can
did you try tmobile orginal rom?there are some orginal tmobile roms on xda-developers.you can find link in this forum and try them.they should work.how do u know your battery is %96?is your wizard opening correctly?also wizard rom has omap be sure overclock status isnt active,also download latest active sync.if already installed uninstall and install new version....i hope you will be able to fix..cheers
First Download the Base rom from below given locations..
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Before your do this charge your phone full using.. power adoptor. first..
then put it in bootloader mode..( 3 color screen ) then install above rom.
hope this solves your problem...
mayur9890 said:
i tried to upgrade it with wm6 from wm5.it got stuck at bootloader mode givin the above info(ipl....)i tried the wizardlove rom.it did worked,but with no sound and constant battery error even if my battery is 96% charged.what should be done to it now .and fikri bhai,thnx a lot for ur concern.guide me more if u can
Click to expand...
Click to collapse
your device are G3. have you cid-unlocked your wizard? i would suggest you to flash your wizard to its original rom. then we'll work from there if the problem is still there. goodluck
hey nasir what r u saying.i thought my device was g4 as per the g4 thread.& i was making the attempts to flash just like the g4 thread.plzz clarify all u guys is my device a g3.coz i read somewhere that installing a g3 rom on a g4 bricks the device totally .
plz plz reply to me guys .iam in a bigbig problem
Your device is a G4. You gave your IPL/SPL as 2.06.001 which is a G4 if it were a G3 your IPL/SPL would only be 2.06. You aren't doing anything wrong by following the G4 directions.
A *G3* Wizard will have the following:
IPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.).
_SPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.)_
A *G4* Wizard will have the following:
_IPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
_SPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
Click to expand...
Click to collapse
from wizard wiki. ur device is g3 since your
IPL 2.06.001
SPL 2.06.001
note that there are only two zeros.
regards,
fikri
iam really sorry fikri bhai.actually I didn't posted the correct info.I checked it 1nce again and it was like ipl & spl both are 2.06.0001.thus clearly its a g4.but iam still not able to get the correct working rom on my piece.now iam getting totally frustated with roms.only the wizard love rom is working & that too with no speaker sound and 0% battery error.even when the led shows green light
have you tried official tmobile AKU 3.8 rom? i find it very stable and fast. if you have tried many roms and the problem still persist, sorry, i have no idea to help you. all d best
regards
I was upgrading my t-mobile 8150(?) the k-jam with the new windows mobile 6 and in the middle of it my comp crashed!! now i am stuck at the bootloader mode (3 colored screen) and when i try to redo it i get to 99% and get a 302 error message. i follow the instructions given but keeps going in circles. its a G3 so is my phone bricked or is there a way to save it? i've been looking at this site all day but am now just more confused. lol thanks for your help!
No your phone isn't bricked. As long as you can get into the bootloader screen you should be ok. What you need to do is flash an official carrier rom either tmobile 2.26 or wizard love rom after you that than you can reflash to wm6. look at the stickies in the wizard forums that is where you can find these roms.
Thanks for the info but seems my techno curse continues. I tried the wizard love rom but it was in a different language and whem i tried the tmobile 2.26 i got "error 274 connection." Any more suggestions? Again thanks soo much for an issue I'm sure has been posted here a thouand times.
This happens to me all the time. I always use the Cingular 2.25 rom, it works perfectly and I have an I-mate K-JAM. Then, do the WM6 upgrade, but ensure all of your Norton and Antivirus and background running apps are shut down. Good luck.
yes also take out your mini sd card if you have one. even though its in another language it will work. "AVANTI means next. so just keep hitting that and you will be fine.
hmm been trying to d/l the Cingular 2.25 rom but the link seems to have stoped working...
It;s aaaaaaaaaaaaaaalllllllllliiiiiiiiiiivvvvvvvvvvvvvvvvveeeeeeeeeeeeeeeee!!! for now lol Lets see what happens after i install wm6 I couldn't get the cingular rom but i had already dowbloaded the button rom i found here earlier and it worked like a dream!! quick and easy!! thank you all soooooo much!
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
flash to the tmo 2.26 or cingular 2.25...that will give you an IPL/SPL of 2.xx
then, you can flash to WM6
i want to delete this message. can't find a way to do it.
there's any other way to flash without usb cable?? sorry to bug in this thread but i lost my usb connection somehow and did a hard reset and still doesn't work. my phone charges. and no is not my computer cuz my wifes phone same as mine does sync i have a tmobile mda also known as the cingular 8125.
fallon75 said:
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
Click to expand...
Click to collapse
keep reflashing buttons rom until both ipl/spl are the same number. if they are different, then the flash didn't complete correctly. (it happens often, so it's kinda normal). just keep reflashing. after both ipl/spl are the same, then CID unlock and then update to an official carrier...then flash a wm6.
can anyone help me??
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
starkwong said:
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
Click to expand...
Click to collapse
it does shows but how can i flash?? it still won't connect o my pc. my pc doesn't recognize it. but it does recognize my wifes phone.
Try to run RUU straight with Wizard connected and running in bootloader mode
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
You know what the totally histerical thing about this is? This is the exact same reason I made my first post. LOL.
Alright I'm gonna try to help you seeing as how it doesn't look like too many others are looking here.
I have several questions first before I can help you.
1. Who is your wireless service provider? IE: T-Mobile, Cingular, Etc...
2. What Is your IPL/SPL?
Answer these 2 questions for me and I will be able to better help you.
Thanks for the quick reponse
Now the irony is i am here in nepal and i use the phone as a simple mobile phone, but as far as i know i remember flashing a T-Mobile ROM while upgrading to WM6, the IPL and SPL both are 2.26, i unlocked the device while upgrading..
Thanks
Kushal
paraozzy said:
I tried reflashing my IMATE KJAM to WM6
The process went till 35% and then got disconnected.
Now its stcuk on the Bootloader Screen(Three colors screen)
Tried the Hard Reset(comm mann+voice button+reset)
It doesnt do a hard reset, the same screen flashes back again.
Tried reflashing i get the Error 300
The previous ROm was crossbow underground edition.
Please help and let me know whats next that i can do.
Click to expand...
Click to collapse
Hey!
ok lets c if I may be of some help here,if u r in bootloader screen than try to reflash again T-mobile 2.26 rom and if it goes alright than go on to flash any other wm6 cooked roms.
or
if it doesnt flash than i wud suggest u reflash back the buttons 105 rom to get back to ipl/spl 1.05,than again use lokiwiz tool to unlock cid & reflash T-Mobile to gain ipl.spl 2.26
hope it works out.it happened once with me also, I did the same & now I'am running wm6 XM6r3 Rom,Secondly u can use the WST TOOL by Mestrini to verify ur device status, u can even Cid unlock ur device with it, Goodluck
Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..
paraozzy said:
Yup man flashing the T-mobile 2.26 did the job..
Great thanks for the same..
Click to expand...
Click to collapse
glade you got it up and running good luck and happy flashing
Hi, I was trying to flash/upgrade my Wizard to WM6.1 (was able to do it once over the weekend). But got over-confident and was trying to do it second time (ofcourse use some other cooked rom) but during the upgrade, my kid pulled out the wire from the computer.
If that was not enough, in a panic mode, i actuall did a reset on the wizard. Now it wont even start (no lights light up nor I get the 3 color screen = bootloader.).
The time when my kid pulled up the USB cable, I was "upgrading" to 2.26 after having successully downgraded to 1.xx ..
I fear I have bricked my wizard...is there anything I can try before having to spend 40-50 buck and get to cell repair estimate? I tried hard-reset (Camera + Power On), (Green + Red button + Power), Communication Button + Voice Button + Power but nothing happens.....
Sorry but i guess your Wizard is a brick, the only solution is that you get a new motherboard or a new Wizard. Feel Sorry to say that but still dont go on my advice let some other senior member say something too. Maybe there is a way i dont know and anybody else does.
did you have a full battery?do you think your battery drained through the process?try charging the battery in some other way or try another battery...if that doesn't do the trick....you need a new motherboard.....
G3 phones are very stubborn devices,its very hard to 'Brick' it ! They don't get Bricked in this way ,unless you really do stupid thing and flash a Rom with G4 IPL/SPL.
Here,you have a dead battery,just try to charge it fully ,somehow, or borrow another battery from a friend,or if you prefer,buy a new one,as it comes with little charge to start and boot up the phone and even sometimes flash a rom.
Apart from this,I don't believe its Bricked,G3 doesn't get bricked like that,by being interrupted in the middle of flashing or resetting it.
zabardast i think he was upgrading the bootloader...that kills it right?
xardas_90 said:
zabardast i think he was upgrading the bootloader...that kills it right?
Click to expand...
Click to collapse
What I believe he means he was upgrading to IPL/SPL 2.26 by flashing T-mobile,after downgrading to 1.xx by Button's Rom,while flashing,it got interrupted and in panic he reset the device,now can't power Up the device.
Well,interrupted during flash or resetting doesn't brick a phone.
secondly,Bootloaders IPL/SPL are automatically downgraded/upgraded by flashing a Rom with IPL/SPL when flashed.
Unless,as I posted above, if he has flashed G4 IPL/SPL or a G4 Rom with IPL/SPL,it wud certainly brick a G3 device.But as he said he was upgrading to 2.26,means,he was flashing T-mobile,so I believe,it cannot be bricked this way
OOOPS!
On second thought,did he mention its a G3,well,what if its a G4!!!
and he flashed Button's Rom............. GONER!
I assumed its a G3,coz he posted ipl/spl 1.xx and 2.26 and he already got it upgraded.
hi thanks for all the info.
Before the upgrade I verified it have more than 60% battery (arround 80%). I had got a new battery and charged it 100% overnight before i tried the first upgrade.
Its a G3 phone (It showed 2.2x a did not have following .000 which show for G4).
I had downgraded using the Button ROM and was upgrading the rom using WST write ROM.
So is there still a chance..
I can try and see if anyone's got a HTC Wizard within my friends/around and try to charge the battery in their phone....just to make sure its fully charged
try this. http://forum.xda-developers.com/showthread.php?t=276963
I have repair my wizard with this manual.
zabardast_1 said:
OOOPS!
On second thought,did he mention its a G3,well,what if its a G4!!!
and he flashed Button's Rom............. GONER!
I assumed its a G3,coz he posted ipl/spl 1.xx and 2.26 and he already got it upgraded.
Click to expand...
Click to collapse
I wonderfully and utterly stupidly did exactly that !!! I wrote a G4 rom on G3 Wizard !! It turned on once after the procedure and wm6 loaded all the "extras" and then re-booted... into complete darkness !! Now it's completely dead nothing turns on, not even the green charging light. I left it for a couple of months and the red light come on briefly... but that's all. Now it stops the papers from flying off my desk .... it's my funeral and I'll cry if I want to (
I honestly feel sry for it,but may I ask which was the rom which you say is G4,which you flashed ? coz all official roms are suitable to flash to both devices and custom build roms do not contain IPL/SPL in them,which cud harm any device,its really questionable as which was this rom which bricked a G3 phone,if you are sure your phone is a G3. YES! its certain that if a G4 phone is flashed with a G3 specific rom,it'll get bricked,was your G3 or G4 ?
zabardast_1 said:
I honestly feel sry for it,but may I ask which was the rom which you say is G4,which you flashed ? coz all official roms are suitable to flash to both devices and custom build roms do not contain IPL/SPL in them,which cud harm any device,its really questionable as which was this rom which bricked a G3 phone,if you are sure your phone is a G3. YES! its certain that if a G4 phone is flashed with a G3 specific rom,it'll get bricked,was your G3 or G4 ?
Click to expand...
Click to collapse
I confirm my Wizard is a G3 device and the rom I accidentally wrote over it was a G4 rom (I since deleted it from my computer to ensure I would not repeat the mistake) ....
So, there are G4 specific ROMs floating around out there? Now that doesnt make a whole lotta sense. I thought that all carrier ROMs where G3 (and to an extent G4 safe), and that all cooked ROMs where G3 and G4 safe because they dont contain IPL/SPL?
ashasaur said:
So, there are G4 specific ROMs floating around out there? Now that doesnt make a whole lotta sense. I thought that all carrier ROMs where G3 (and to an extent G4 safe), and that all cooked ROMs where G3 and G4 safe because they dont contain IPL/SPL?
Click to expand...
Click to collapse
After G4 came out, the providers started releasing ROM packages with two bootloaders and a new RUU that would detect the device DOC generation and flash accordingly. If you extract an 'official' ROM you'll find IPL_1, SPL_1, IPL_2, SPL_2, etc... which means G3 and G4 respectively and therefore safe to flash to any Wizard in the market (minding the CID status of course)
As for G4 only roms i believe that might be a few around that were cooked in a time when the "G4 safe" concept wasn't yet implemented and when one would flash a complete ROM and upgrade IPL/SPL at the same time.
Nowadays, since Wizard official development has ended, almost everyone has a 'high' bootloader and only needs to change the OS version/flavor thus the absence of IPL/SPL in a released cooked ROM
Hope it's clear
cheers
mestrini said:
After G4 came out, the providers started releasing ROM packages with two bootloaders and a new RUU that would detect the device DOC generation and flash accordingly. If you extract an 'official' ROM you'll find IPL_1, SPL_1, IPL_2, SPL_2, etc... which means G3 and G4 respectively and therefore safe to flash to any Wizard in the market (minding the CID status of course)
As for G4 only roms i believe that might be a few around that were cooked in a time when the "G4 safe" concept wasn't yet implemented and when one would flash a complete ROM and upgrade IPL/SPL at the same time.
Nowadays, since Wizard official development has ended, almost everyone has a 'high' bootloader and only needs to change the OS version/flavor thus the absence of IPL/SPL in a released cooked ROM
Hope it's clear
cheers
Click to expand...
Click to collapse
This, however does not solve my "totally dead" G3 Wizard, I suppose it must go to a service lab after all.....
Simply
gizmofan777 said:
This, however does not solve my "totally dead" G3 Wizard, I suppose it must go to a service lab after all.....
Click to expand...
Click to collapse
Does your wizard starts? YES- it can enter to bootloader? Yes - its not bricked...
Does your wizard starts? NO- Maybe a dead battery... Does your wizard shut off and conected to the wall charger shows a Led RED? this two are......
BRICKED PHONE!!!!!
Thats all...
+ Que PPC said:
Does your wizard starts? YES- it can enter to bootloader? Yes - its not bricked...
Does your wizard starts? NO- Maybe a dead battery... Does your wizard shut off and conected to the wall charger shows a Led RED? this two are......
BRICKED PHONE!!!!!
Thats all...
Click to expand...
Click to collapse
Battery OK, red light briefly once then never again, no other activity - patient is brain dead.... it's "el bricko phone" !!
Bricko Phone?????????
gizmofan777 said:
Battery OK, red light briefly once then never again, no other activity - patient is brain dead.... it's "el bricko phone" !!
Click to expand...
Click to collapse
Hahahaha "A silence minute for it's soul please"
Father, embrace with your arms this soul of a dead wizard and let it rest in peace in the Pocket Heaven Amen.
More Respect please HAHAHAHA
what a funny men!!!!
I bricked my phone too!
Hi there! I think I have the same problem. My phone is a G4 and it won't boot to bootloader mode nor charge in a wall charger. I had my phone unloacked and during the process, my phone shut down. Now it's dead. Is there a go around for this problem? Thanks.
Hey Guys,
I've got a similar thing, think I might have flashed a G4 file to a G3 Wizard.
I have, by following through the "Let's Revive A Wizard" thread (http://forum.xda-developers.com/showthread.php?t=274766) been able to get the thing to boot into the bootloader screen and show IPL 1.05 : SPL 2.26.clip I think from memory and then flashed the 02 ROM but then it just boots back to the bootloader.
I also tried an SD backup from my other G3 and followed that through but nothing.
I think there is a way to revive using the methods shown, but there appears to be no more help relating to it and I'm out of ideas myself.
If anyone has a IPL & SPL file for 2.26 can they post it for me to try.
Thanks.
Ian