hi, i have a htc p3600 With portuguese Rom and i have just CID unlocked my device, i have searched the wiki but i didn't fine any info there about Rom Dumping in this device.
So is it possible to dump my rom to the storage card so that i can test the Dopod GPS enabled Rom and after i can restore my original Rom throught Storage card?
many thanks for the help ;-)
it's not possible. Commands to do this have been removed in trinity's bootloader.
take care pof !!!
This guy have a device with a 1.01 bootloader version !!!!
when i post this message i have a bootloader 1.06 but after that i have CID unlocked my device and the Bootloader is now 1.01
which method did you use to CID unlock your Trinity?
the imei-check site, here is the link http://www.imei-check.co.uk/m700unlock.php
to correct the last post, i have a bootloader 1.06 when i buy my htc p3600, after CID unlock it i stay with a 1.01 bootloader
so its possible to dump the rom with spl 1.0.1?
read here:
http://forum.xda-developers.com/showthread.php?t=291157&p=1112861
Related
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
Click to expand...
Click to collapse
I would be very thankful if you could post a link or send me the ROM upgrade Utility needed
best regards
Bayardo
risidoro said:
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
phone_one said:
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
Click to expand...
Click to collapse
The modified RUU (ROM Update Utility) is attached.
For ModelID you can use both WIZARD or Prodigy (i used the former).
risidoro said:
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
sorry to hijack your thread,
just wanted to ask a short question.
if my info is as below:
US T-mobile MDA Vario
IPL 1.03
SPL 1.06
GSM 01.12.10
OS 1.3.13.5
ROM version: 1.3.13.5 ENU
ROM date: 9/29/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtROM: 1.3.13.116
OS 5.1.70(build 14406.1.1.1)
Click to expand...
Click to collapse
does this mean that its on a G3 chip and that i can use lokiwiz03a to CID unlock it and upload any 2.x ROM as i please? and downgrade the ROMs too?
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
I've just published a tutorial that can help those with a G4 or G3 (>= 2.21) CID-Locked device to install whichever 2.x ROM they like.
The tutorial is here:
http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
risidoro said:
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
Click to expand...
Click to collapse
thanks risidoro.
i'll give it a go later.
there wont be any issue downgrading the ROM later would there?
eg if i were to install:
RUU_Wizard_2211301_22113102_021911_DOP_ASIA_WWE_Ship.exe
Click to expand...
Click to collapse
and later back to
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe ?
Click to expand...
Click to collapse
oh, the bootloader (IPL/SPL) doesnt get upgraded either when i upgrade, would it?
oh thank for the help risidoro.
i saw your post after i uploaded mine.
read through your tutorial and i figured that both IPL / SPL will get updated
people like you makes this site great
thanks once again.
My original config:
ipl 1.08
spl 1.08
gsm 01.16.11
OS 1.8.11.1
I ran lokiwiz's CID-Unlock (http://forum.xda-developers.com/showthread.php?t=249474)
I used the instructions in shogunmark's Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED thread with that RUU.
Now when I boot my 8125 it displays:
IPL 1.08
SPL 1.08
OS 2.26.10.2
It takes about 3 minutes from a cold start then freezes at the password screen.
What now?
If I boot into bootloader mode, how can I fix this?
flash with original cingular rom
http://america.htc.com/support/docs/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe
possibly your 8125 is nit cid unlocked
that cingular rom shouldnot have any problem with flashing
good luck
I'm in bootloader mode. I opened the file from HTC that you recommended. Just before upgrading it states that my original version is <blank>.
Thanks for your help
itissat, your link fixed it. Thanks!
Now I have to decide if I want to try again...
cid unlock
be sure that you cid unlock it before flashing custom roms
if you read the instructions, you have to upgrade to an 2.xx Official Rom BEFORE you flash to one of the custom 2.26 roms... Just a reminder
itissat said:
be sure that you cid unlock it before flashing custom roms
Click to expand...
Click to collapse
As far as I know, I cid-unlocked. I use lokiwiz's newest release here. Now I did not do the SuperCID unlock only the regular unlock. Anyone care to explain what the supercid unlock is?
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).
sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.
many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel
hi all..i have a T Mobile MDA vario (HTC Wizard) with the following specifications;
1.Rom Version 1.8.10.2 WWE
2.Rom Date 12/10/05
3.Radio Version 01.09.10
4.ExtRom Version 1.8.10.104
My device is G3 and WM5 installed on it.
I want to upgrade my device to the latest available ROM and want to install WM5 or WM6a or Vista on it.I searched on the forum and found too many articles and m really confused how to start and wat to choose.I never upgrade my device before and m newbie in it.
Plz if anyone can suggest me the exact links and the tutorials posted on this forum.Also how could i know if my device is CID Unlocked?
Hi,
I´m searching for the same - especially for the T-Mobile Rom and WM6.
Where can I get these?
thanx,
HM
ahmeed80 said:
hi all..i have a T Mobile MDA vario (HTC Wizard) with the following specifications;
1.Rom Version 1.8.10.2 WWE
2.Rom Date 12/10/05
3.Radio Version 01.09.10
4.ExtRom Version 1.8.10.104
My device is G3 and WM5 installed on it.
I want to upgrade my device to the latest available ROM and want to install WM5 or WM6a or Vista on it.I searched on the forum and found too many articles and m really confused how to start and wat to choose.I never upgrade my device before and m newbie in it.
Plz if anyone can suggest me the exact links and the tutorials posted on this forum.Also how could i know if my device is CID Unlocked?
Click to expand...
Click to collapse
first,plz always post full data of your phone,although you have posted the Device info,but you have not posted the actual data IPL/SPL...? of your phone,which determines the DOC chip of your phone,so post the IPL/SPL...?
As you say that you are using wm5,it must be T-Mobile official Rom,which come pre-installed on the phone,therefore your phone is SIM/CID locked.
In order to upgrade to a newer and latest wm6 Rom,it's necessary to first SIM/CID unlock your phone.
Since you say that you have a G3 device,then to read and understand how to unlock a G3 with IPL/SPL 1.xx(AKU 1) device,check the below link:-
http://forum.xda-developers.com/showthread.php?t=285435
But if you have a G3 device with IPL/SPL 2.xx(AKU 2) than read this thread:-
http://forum.xda-developers.com/showthread.php?t=263116
Fully read and understand these guides and first SIM/CID unlock your phone.
Yes,here's this wonderfull tool by mestrini to check the CID lock.unlock present status of your.Download WST Tool from the below link :-
http://forum.xda-developers.com/showthread.php?t=329170
this tool will give you all the present status and info of your phone,good luck
airbrush999 said:
Hi,
I´m searching for the same - especially for the T-Mobile Rom and WM6.
Where can I get these?
thanx,
HM
Click to expand...
Click to collapse
plz read by above post and do accordingly,you also
zabardast_1 said:
plz read by above post and do accordingly,you also
Click to expand...
Click to collapse
hi...my IPL is 1.08 and SPL is 2.26..my Phone is CID locked..but SIm is unblocked as i can use any sim card with this mobile...i downloaded the CID unlock utility and now want to perform CID unlock process.But wat to do after that? from where i can download the excat and updated Rom for my device.And can i use any Rom on my device? like O2 Rom or other Rom available in this forum?? Plz advice...
ahmeed80 said:
hi...my IPL is 1.08 and SPL is 2.26..my Phone is CID locked..but SIm is unblocked as i can use any sim card with this mobile...i downloaded the CID unlock utility and now want to perform CID unlock process.But wat to do after that? from where i can download the excat and updated Rom for my device.And can i use any Rom on my device? like O2 Rom or other Rom available in this forum?? Plz advice...
Click to expand...
Click to collapse
First of all you'll have to CID unlock your phone to upgrade to any latest wm6 roms.Read and fully understand the guide and procedure of CID unlocking in the thread which I already gave you in the above post already,you'll find there all the instructions and lokiwiz02b unlocking tool download and all the Roms (Button's Rom 1.05 and T-mobile 2.26) download links,which are required to cid unlock your device.Only after Cid unlock you'll be able to upgrade to any wm6 Rom.
But if you like to have the wm5 rom,which already installed on your device then there's no need to unlock and upgrade to another wm5 rom,as you already got one.but if you want to upgrade to wm6 rom than I'm afraid you'll have to cid unlock the device and upgrade.Once again I'm posting the link for the guide to unlocking:-
http://forum.xda-developers.com/showthread.php?t=285435
I repeat,only after cid unlock you can upgrade,how to flash a rom follow this guide:-
http://forum.xda-developers.com/showthread.php?t=310831
you can find all the latest wm6 custom build Roms here in this thread :-
http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=-1&f=356
good luck
Well! as i see your phone has an IPL 1.08 and SPL 2.26,and it's required to downgrade to IPL/SPL 1.xx,therefore as you already have IPL 1.08,I think you shudn't have to flash Button's Rom 1.05 to downgrade to IPL 1.xx, you can download lokiwiz02b and try to cid unlock,it may be successful, but as it shows SPL 2.26,it may not be successful as both IPL/SPL 1.xx are required,but if it doesn't cid unlock with IPL/SPL 2.26 at first attempt,than you'll have to Flash Button's Rom 1.05 to downgrade to both IPL'SPL 1.xx
Mda vario wm5 to wm6
HI Every one thear i have T-mobiles Mda vario with wm5 on it i whant to upgrade it in wm6 how to do this sir pls help me
MY DEVICE INFO IS
ROM V 2.21.2.6 WWE
ROM DATE 3/9/06
RADIO V 02.19.11
PROTOCOL V 4.1.13.09
EXTROM V 2.21.2.109
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.21.2.6
and pls tell me that whan i upgrade it is unlocked or not .not os how to unlocked it pls help
Hey,
I'm thinking about upgrading my MDA Vario too and even my IPL/SPL is the same.
IPL 2.21.0001
SPL 2.21.0001
Does that mean that ive got a G4 and do i need to unlock the CID
After it is complete, your device will automatically reboot. The IPL version will be 2.21.0001 and the SPL will be 2.21.olip. If you see this then HardSPL was successfully flashed to your device.
Click to expand...
Click to collapse
But ive never flashed my phone. Thats why i need your help. And where can i get a good Rom(if possible German)?
How to perform rom upgrade ony t-mobile wiza200 vario
Hi there!
I have a t-mobile wiza200 with the following specs:
Device was given to me and its from The Netherlands. (Dutch Language???)
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.2
VERSION
==========
ROM Version : 1.6.2.2 NLD
ROM Date : 11/1/05
Radio Version : 01.12.10
Protocol Version : 4.0.13.23
ExtRom : 1.6.2.103
HARDWARE:
==========
CPU : OMAP850
Scanning Speed : 195Mhz
RAM Size : 64MB
Flash Size : 128MB
Flash Chip Type : M-System G3
Data : 16bit
Storage Size : 47.46MB
LCD : 240x320
Colors : 65536
IDENTITY
==========
Model # : WIZA200
Platform : Pocket PC
IMEI : 35638100038564500
- Im a newbie in this... so below are some of my questions... hopefully this could be answered.
* I've read the post from lokowiz regarding the CID unlocked. Will this work for me in order to for me to flash it with WWE rom?
* How does it goes?CID unlocking and then WWE rom flashed?
* Where could I possible get a WWE rom for this type of model?
* is there by any chance a site or screenshots i could get to do all of this aside from the site http://www.mdahacks.com/item/2006/6/7/unlock-your-htc-wizard-mda-8125-phone-using-lokiwiz ?
- Hopefully someone could answer this and help me at least... Thanks to all!!!
I have wizard (ERA MDA VARIO – polish version) witch ipl/spl 3.08 and WM5. My CID is lock. I want unlock CID and I must downgrade ipl/spl to 1.03 or lower. I load some China ROM and… ipl 1.03 but spl is still 3.08. When I want load any other ROM without this China and original ERA ROM 3.08, RUU say: is not for your hardware, or something like that. I use Italian and English RUU and… NOTHING!!! Please help me! Anybody have any idea?
p.s.
Sorry, my English is not very good…
Thanks for any reply
barty84 said:
I have wizard (ERA MDA VARIO – polish version) witch ipl/spl 3.08 and WM5. My CID is lock. I want unlock CID and I must downgrade ipl/spl to 1.03 or lower. I load some China ROM and… ipl 1.03 but spl is still 3.08. When I want load any other ROM without this China and original ERA ROM 3.08, RUU say: is not for your hardware, or something like that. I use Italian and English RUU and… NOTHING!!! Please help me! Anybody have any idea?
p.s.
Sorry, my English is not very good…
Thanks for any reply
Click to expand...
Click to collapse
HEY just use lkiwiz .2b to CID unlock and then flash any ROM you want! You do not have to downgrade the SPL in order to CID unlock!
Z
wrong name?
zeeshanlateef said:
HEY just use lkiwiz .2b to CID unlock and then flash any ROM you want! You do not have to downgrade the SPL in order to CID unlock!
Z
Click to expand...
Click to collapse
"lkiwiz .2b" - what is this? If this is software to unlock CID in wizard, check the name (probably is wrong) or I can't search in net.... Is this lokiwiz - Version 0.2b
Thanks for reply
barty84 said:
"lkiwiz .2b" - what is this? If this is software to unlock CID in wizard, check the name (probably is wrong) or I can't search in net.... Is this lokiwiz - Version 0.2b
Thanks for reply
Click to expand...
Click to collapse
ya i missed the 'o'
it is LOKIWIZ 0.2b! run it man. I had wizard love's ROM, IPL 1.01, SPL 3.08. I then unlocked the ICD using lokiwiz and flashed XDA WM6r5.
Good Luck!
Now, i dont know if i should reinstall the IPL/SPL 3.08 flash... it might just mess everything up again! also the radio update sounds interesting...
ANy ideas?
Z
dude, i had the same.
Now just install original WM5 from website. Should works.
It's work
Thanks. Work
post close