Hi there,
a little question:
once I supercid my trinity I'll be able to backup my current rom before upgrade to another rom?
Thanks in advance
[email protected]
no. the command to dump the rom is not available in the 1.06 bootloader
Related
Offcial Rom from Dopod (Dopod D810)
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
does this new rom support Gps???
vdias said:
does this new rom support Gps???
Click to expand...
Click to collapse
still not supported
Thanks for the rom, moved to safe heaven:
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Be careful when flashing CID locked devices, this ROM has higher bootloader version: 1.07.0000 Shipped
Most probably this version will enforce CID checking.
pof said:
Thanks for the rom, moved to safe heaven:
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Be careful when flashing CID locked devices, this ROM has higher bootloader version: 1.07.0000 Shipped
Most probably this version will enforce CID checking.
Click to expand...
Click to collapse
I thought so too. It certainly won't work on mine since it is an HTC and not a Dopod. I wonder if we could use the same novenderID installer used with the Prophet and just install extracted the files? I suppose the trinity could need a new version. What do you think?
pof said:
Thanks for the rom, moved to safe heaven:
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Be careful when flashing CID locked devices, this ROM has higher bootloader version: 1.07.0000 Shipped
Most probably this version will enforce CID checking.
Click to expand...
Click to collapse
do we have some sort of bootloader downgrade o noid solution ?
thanks
It's not possible to do a _noID utility for Trinity AFAIK. CID is checked by bootloader, and rom upgrades use NBH format.
pof said:
It's not possible to do a _noID utility for Trinity AFAIK. CID is checked by bootloader, and rom upgrades use NBH format.
Click to expand...
Click to collapse
Very very bad......... now only dreams about SuperCID
pof said:
It's not possible to do a _noID utility for Trinity AFAIK. CID is checked by bootloader, and rom upgrades use NBH format.
Click to expand...
Click to collapse
This news is very depressing. That means that people with an HTC device will never be able to use Dopod ROMs or cook up new ROMS, for instance the GPS enabled? That's no fun. Maybe we just have to get the Trinity unlocked?
yes, you need to cid unlock it to do such thing. Is exactly the same thing as happens with hermes.
pof said:
yes, you need to cid unlock it to do such thing. Is exactly the same thing as happens with hermes.
Click to expand...
Click to collapse
Use TyTn utils for unlock CID very dangerously!
because, for CID unlock it is necessary downgrade SPL to 1.04 (by default bootloader 1.06)
Sorry for my English
lvsw said:
Use TyTn utils for unlock CID very dangerously!
Click to expand...
Click to collapse
I didn't mean to use Hermes CID unlocker on trinity, that would definitely brick the device because it flashes a wrong radio.
You guys need to work together to develop a method to CID unlock the trinity, but this will take some time, first you have to gather info about the device and post it in the wiki... bootloader part is most important.
Hi, anyone has used this new ROM from dopod? What are the changes? I was not able to find any release notes.
How can i know if my device is CID locked?
has anyone extracted the extended ROM from the Dopod D810 handset?
I would like to have a sneak peak into anything that might be useful for the hermes.
thanks in advance
Ronny
1)how can i tell if my device is htc or dopod?
2)how can i tell if i have a CID locked device?
bootloader command 'info 2' will answer both questions
Can someone summarize the CID locking for someone unfamiliar (or point me to a thread to read)?
I have an HTC-branded, unlocked Trinity that I want to keep up to date.
@mikesol:
http://forum.xda-developers.com/showpost.php?p=1051363
Hope that helps
pof said:
bootloader command 'info 2' will answer both questions
Click to expand...
Click to collapse
HTCSHTC__001‰øð'HTCE
ok, i guess i have a htc device and not dopod.
now, concerning the cid locking, i cannot understand whether it is locked or not!
thanx in advance
Hi all,
I don't know what it's happening but after loading the ROM, I have the Qtek just with the operating system without any additional software.
The process to load the new rom is 100% ok.
Any idea about what is the reason of it?
thank you in advance
im also having the same problem
CID locked...
http://forum.xda-developers.com/showthread.php?t=285435
I have the same problem, but my device is a CID locked G4..
I haven't ever tried to upgrade my Wizard (done my Uni & BA) but I would have thought the phone would have rejected the upgrade at the start of the process if the CID lock was the problem ??
Maybe i'm wrong... as I said, I haven't tried to upgrade the rom on this one before.
The CID is UNLOKED
In my case, the CID is unlocked.
Any idea about the problem?
I don't understan it.
If I install the ROM called "Molski's 3.0.0.0 AKU3.2", all the additional applications included in the ROM are install after the first reboot. Nevertheless, if I install the ROM "WM5 AKU 3.3 " or "superrom v 1.1" I have only installed the operating system.
Help please.
Thank you in advance
hi, i have a htc p3600 With portuguese Rom and i have just CID unlocked my device, i have searched the wiki but i didn't fine any info there about Rom Dumping in this device.
So is it possible to dump my rom to the storage card so that i can test the Dopod GPS enabled Rom and after i can restore my original Rom throught Storage card?
many thanks for the help ;-)
it's not possible. Commands to do this have been removed in trinity's bootloader.
take care pof !!!
This guy have a device with a 1.01 bootloader version !!!!
when i post this message i have a bootloader 1.06 but after that i have CID unlocked my device and the Bootloader is now 1.01
which method did you use to CID unlock your Trinity?
the imei-check site, here is the link http://www.imei-check.co.uk/m700unlock.php
to correct the last post, i have a bootloader 1.06 when i buy my htc p3600, after CID unlock it i stay with a 1.01 bootloader
so its possible to dump the rom with spl 1.0.1?
read here:
http://forum.xda-developers.com/showthread.php?t=291157&p=1112861
Hi,
I wanna use mtty.exe and the rtask-command, but the bootloader is not old enough (not 1.04).
Is ist possible to downgrade the loader and if yes, where can I get an old one?
Thanks a lot for your answer.
Sebastian
SKL74 said:
the bootloader is not old enough (not 1.04).
Click to expand...
Click to collapse
AFAIK there is no 1.04 bootloader for Trinity.
There is a 1.05 MFG SPL for Trinity with rtask.
Used to be available as a part of HTC test ROM in Trinity firmware downloads section in Trinity wiki.
Thanks for the information.
Think, I'll test the HTC test ROM.
Regards
Sebastian
There's no easy way to downgrade, though.
It's also not necessary... Use Des's SSPL to boot your device with SPL 1.05, not risking bricking it by flashing SPL.
Hi Guys,
I have just found the (newest) ROM for my Mteor (RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar) But I dont have ANY experience flashing my device with new ROMs
Should I just install this ROM and see what happens or do I have to make some extra actions to get this ROM properly installed?
Could anyone please help me (in a N00B language) to get my device updated?
I saw that some versions of the IPL (?) en SPL (?) makes differences, but I don't know what versions I use. What versions of IPL and SPL should I have?
THNX!
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
futureshock said:
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
Click to expand...
Click to collapse
Alrighty!!!
I shall keep you informed about my progress. (first try to flash my device only using the original ROM)
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
DaLuca said:
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
Click to expand...
Click to collapse
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
jerpelea said:
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
DaLuca said:
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
Click to expand...
Click to collapse
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
jerpelea said:
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
Click to expand...
Click to collapse
oh... hmm... okay... sorry! Thats why the topic-title is "Rom update for a N00B"
But thanks that you cleared this question.