hey all
i have a number of applications i use on a regular basis. mobireader, coreplayer, spb pocket plus/mobile shell
what im wondering is. how would i go about inserting these into a rom update i have downloaded off here, say, faria's wm6? so that i wouldn't have to manually install and register them. so once i'd updated the rom, the programs would be there by default.
can anyone point me in the direction of a guide to do this?
thanx
Related
I'm just starting to get into the depths of my PDA2K and this site is GREAT!!!!!!! Since I'm just one step up from "The Village Idiot", I have a couple questions for all you pros.
After reading about using the extended ROM, and unlocking it and seeing what's in there, I think I've figured it out. Whatever CABs are listed in the config file will be installed upon a hard reset....correct? If true, and since I have only 3.5MB left in Ex ROM, can I put the other CABs I wanted installed in say /storage/CABs, list them in the config file and upon a hard reset they will be installed? Is there any reason to put them into Extended ROM rather than Storage? Is it alright to put CABs in from like games, Resco Explorer, WebIS Mail, etc.? Lastly is there a way to set the programs up where I don't have to go back and enter all the registration numbers again?
Thanks a ton for your help!!!
Tom
In extended rom they are not taking up your precious storage space on the device.
cruisin-thru said:
In extended rom they are not taking up your precious storage space on the device.
Click to expand...
Click to collapse
is it possible then to keep the installation cabs on storage card,
and also, can that path be set in the config file in ext rom?
what happens if a particular cab is not found after hard reset?
is the installation stuck or it just gives a warning and keeps on going to the next cab listed in the list.
Have a read of this
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
It might be a bit to deep but should help you along the way.
1) You can keep a cab anywere you want
2) make sure your cab is read only as it can delete itsself after install.
3) to run a auto install from a differnet storage place you need to hack the reg (see thread).
In all if you have a sd card you could leave your EXt rom empty.
Hack the reg to the new postion and run the Autorun from there.
Have fun
Thanks for all the infor everyone! From what I've read in other threads I need to make sure that TPdisabled is set to off so that when programs like WebIS Mail and SplashID get installed I can touch the screen to make sure they install into the right place and other things. Correct? If this is correct, should I just remove TPdisabled all together?
Thanks again,
Tom
TPdisabled can't be set off, its either run or not run. So dump it and you wont have a problem
MDAIIIUser - Thanks for the link! I looked at it and you're right, it's pretty indepth and I'll have to read it more closely at a later time....like at work.
Question1: leochan2005 had a follow-up saying "why not use backup"? While I agree this would be easier, I'm assuming that by using your method one would get a much "cleaner" install than backing up all the crap that was on the system prior to the hard reset...correct?
Question2: It took me a long time to get my TMo settings setup on my PDA2K and I don't want to go thru that again. Is there a way to backup those settings so that they can be auto-configured at a later time? I read about making a personalsettings.CAB but haven't done it yet.
Thanks,
Tom
MDAIIIUser said:
TPdisabled can't be set off, its either run or not run. So dump it and you wont have a problem
Click to expand...
Click to collapse
Thanks! I take it it should be at the beginning of the config file so that I can access it. Correct?
q1)
Well the short of "why not use backup" is you can if you feel that:
1) Restoring Regedit values from a lower rom version
2) Restoring system applications form a lower rom version such as BT
are called for, wanted or even needed.
I fail to see that point as a upgrade is an upgrade and a backup is a backup. Now you could do a restore of your system data also (which you could also sync and that would be clean
Q2)
Most fo those settings are part of T-mobile.cabs found in Extrom, the rest would have been reg entries that you are going to have to hunt for and copy.
So sorry no way around reading the other thread (personalsettings.CAB)
MDAIIIUser - Maybe I should state what I'm trying to accomplish and you could give me a clue as to how to do it. A couple days ago I upgraded by BT on my PDA2K (generic from Expansys) to 1.0.0.3900 (or what ever the latest is) and I'm currently looking at upgrading my radio to 1.12, but that would require a hard reset. I'm not in the mood to go thru all the program installs and SMS/MMS tweaking again, so I'm trying to figure out the best way to get all my programs and configurations back after the hard reset. I thought by incorporating the personalsettings.cab (for my Tmo settings) and your method I would be up and running pretty quickly. Yes? I have Sprite Backup, but I'm not sure if that's going to overwrite anything after the radio upgrade????
Thoughts?
Thanks!
Well my logic (that could be wrong) would say that a restore of your backup would get you to were you are now.
That you would need a restore as you have to do a hard reset after the 1.12 radion install.
But I can't answer the question will the radio be restored as well,
I don't know, I don't know the settings in the backup application, so am sorry I will have to let somebody else answer this one.
I have just got a 8925 but i want to add some roms to it: ultimate launch, pocket cm, ifonz, & iphone interface. I am not sure of the best way to do this. Should they be added all at the same time, or do i have to add them one by one? Also i am not sure how to unlock the phone so that I can add these apps to the device. I have searched the forums and I haven't found a tutorial for this.
Any ideas?
If you want to be really sure you won't get any problems, soft reset after every installation. This IS overkill, since apps that need a soft reset will ask for one, but it won't hurt you.
Install Kaisertweak first:
http://www.jongma.org/KaiserTweak/KaiserTweak.zip
Extract the zip to your phone and run the extracted .exe from your phone. One of the options found under "Security": "Not-certified Warning". Disable the warning and exit the program (hope you meant this by 'unlocking'). The nag you used to get will be gone.
Good luck!
I think you may mean you want to add some applications and not ROMs? You don't need to unlock your phoine to install applications on them. If you want to flash a different ROM, then you will have to use HardSPL and flash the ROM
Here's pocket CM:
http://www.pocketcm.com/contact.php
Ultimate Launcher:
http://www.ultimatelaunch.de/
As for the Iphone interface, there are plenty of icons floating around, and on the the 'post your today screen' thread on the Kaiser general section, there are massess of info from users on how to achieve an Iphone look to their Kaiser and has links to Iphone Icons
HTC Home customiser is the simplest programme I know where you can input iphone icons and themes to your phone
http://www.pocketemu.com/download4.html
Do i need to hardspl my device to add rom's or can i just softspl?
I suspect you haven't quite understood some basics.
ROM = like Windows. There are 'shipped' ROMs (factory/default/shipped ROMs) and custom ROMs (Dutty/Alex/.../homemade ROMs). You always have 1 ROM 'installed' on your device; otherwise your device wouldn't function (just like a PC without Windows)
CAB = applications. Ultimate Launch, PocketCM, iFonz, & iPhone interface are apps. On PC you need to execute an .exe file (mostly setup.exe) to install an applications. PocketPC's don't work with .exe installers, they work with .cab installers.
Given your posts, I think you only want to install some applications. That means installing .cab files. No need for any ****SPL here.
If you really are already thinking of replacing your shipped ROM, than you WILL NEED HardSPL. But given your explanation I don't think you were planning on doing that.
Hope this clears some things up.
Good luck and welcome...
Can you have more than one rom on a device and just switch back and forth whenever you want to use one or the other?
student174 said:
Can you have more than one rom on a device and just switch back and forth whenever you want to use one or the other?
Click to expand...
Click to collapse
Nope and why do you want to switch ROMs?
Dr. Strangelove said:
I suspect you haven't quite understood some basics.
ROM = like Windows. There are 'shipped' ROMs (factory/default/shipped ROMs) and custom ROMs (Dutty/Alex/.../homemade ROMs). You always have 1 ROM 'installed' on your device; otherwise your device wouldn't function (just like a PC without Windows)
CAB = applications. Ultimate Launch, PocketCM, iFonz, & iPhone interface are apps. On PC you need to execute an .exe file (mostly setup.exe) to install an applications. PocketPC's don't work with .exe installers, they work with .cab installers.
Given your posts, I think you only want to install some applications. That means installing .cab files. No need for any ****SPL here.
If you really are already thinking of replacing your shipped ROM, than you WILL NEED HardSPL. But given your explanation I don't think you were planning on doing that.
Hope this clears some things up.
Good luck and welcome...
Click to expand...
Click to collapse
Thats a good straight to the point summary
I found this handy CAB over at PPC Geeks.
It changes the name of your carrier to whatever you want.
Just uninstall if you want your carrier details back.
There is an info file in the Zip archive.
Works great on my TyTN II.
Regards,
MAC
Thanks for the share
Thanks for the share..
Hi,
I am working on updating the Personalizer script.
You can check it out over here:
http://forum.xda-developers.com/showthread.php?p=4781595#post4781595
Hi Guys,
Yesterday I installed Personalizer (http://forum.ppcgeeks.com/showthread.php?t=21538) on my HD2. I installed the original 3.1 cab yesterday and all was working well but I noticed that my battery was draining very fast. When I tried to uninstall the app, I get ''Personalizer was not completely removed....'' and the app still remains active in my programs list even after soft reset. Is there any kind of revo uninstaller type app that completely erases an app from the registry and/or is there any way I can remove the app fully without hard resetting the handset?
Thanks in advance
At least 1/2 of the cabs I've installed don't appear under 'remove programs'. Running NATF 4.5, is it the rom or me? All programs installed to internal mem.
Nah. I had the same problem n this is with the stock Sprint ROM, and half the ones I did find wouldn't uninstall. The best thing I have found is SKTools. It's not freeware, but it does have a demo version. Great all purpose program.
i had this problem when using my stock rom on my Touch Pro.
hard-resetted it and now have flashed an ENERGY ROM. now i only install the cabs that i really use, don't install a bunch of *crap*, trying to keep the ROM clean.
I they are mainstream cabs, let me know which via PM, & I will rebuild them to be uninstallable.
It is easy if you have the right tools.
FYI, SK Tools is definitely worth the dough I paid.
Hi,
I would like to customize a ROM for myself but i would need your advice...
Is it possible to use a ROM (Lets say NRG ROM 2.5), and to customize it (reg tweaks, MMS config, Exchange Server config with password set by default, install some cab and put the registration keys by default....) ?
If this is possible, is it hard to update it ? for exemple if NRG updates his ROM, i also want to be up to date with mine, is it easy to "synchronize", or reapply all previous actions without too much hassle ?
Do you have any links i should read to start a Kitchen ?
Thanks in advance
It might be worth having a search around for SASHIMI. It'll let you collect .cabs and .reg files etc and automate running then after youve flashed a new ROM.
if you figure out how your reg details are kept for each piece of software (in the registry or a file etc.), you can get it to reinstate them after flashing too.
You could DL the latest verion of a ROM, pull it apart and change whatever you like and then flash it to your phone but it'd be a pain for pain version.
Using sashimi, its also easy to update your setup when indiviudual apps and settings change, without needing to reflash your phone and then re-sync etc.
The way I see it, sashimi only really needs setting up the once and then given a tweak when something changes rather than needing to be re-done as with a ROM...the only down-side I can really find is it needs running after a hard-reset, whereas if you cook the changes in they wouldnt (so its no good for 'find or nuke my stolen phone' type apps).
I believe a lot of cooked ROMs include 'User Customization' (UC) which does a similar thing, but i havent used it myself.
Also, I may be wrong, but i think you could need certain details from the original chef before you can pull apart a cooked ROM too (i remember reading about file somewhere in your kitchen, memory fails me though)-and, of course, the chefs permission
Let us know what you try out.
'tunes