I´ve upgraded to wizard 2a beta and my button lock function doesn´t work:
it´s like this, i power off and press any hardware button and the screen doesn´t wake up but the programs starts running, so when i power on the device i have several programs running.
This version has screen lock and i also use it and it works but after a few minutes some programs are running and in the today screen it says screen locked and i can tap any function and it starts to work.
I also have huge battery drain only one day stand with lesser use than wm2003.
Need Heeeelllp!!!
I don´t want to go back to wm2003!!!
I think you'd be much more satisfied with TuMa 1.3 for starters, it is much more secure and stable.
Regarding your question, there are two button lock applets in your control panel, one being in Personal > Buttons and the other in System > Button Lock. Now in all honesty I can't remember which one it is which does work, but one of them does, so set both of them to Lock all buttons except Power button.
Hope this helps!
Leo
TuMA 1.3
I´ve upgradede to tuma 1.3 and its much better. No problems now.
Thanks
I've tried finding an answer to this question in the FAQ and Wiki, but without success.
Do any of you know of a simple program that, when run, will awaken my Kaiser out of sleep mode? In other words, a program that will turn on the backlight when executed?
The program really doesn't have to do anything. I just need it to come out of sleep mode for a short, automated task that I need to run during the night while I'm asleep.
Thank you,
Peter
Yeah, there's an actual button to do it, it's on the right side near the top. I'm pretty sure you've used it since you know how to turn the screen in the first place. Wow...
It's called the Power Button ...
kristoff_sz said:
It's called the Power Button ...
Click to expand...
Click to collapse
which he can somehow teach himself to press while he's asleep??
he's looking for a program that automatically does what the power button does at a specific time, I have not heard of one but then again I've never looked for one.
Try using Schaps Advanced Config tool and set Time to wake up to 90sec(or install SPB Time and check "Wake up fix"). it seems that OS just dont get enough time to power up to wake up
It should work.
Ptravel alarm works fine to me
Hi all, i'm just after some help with AE button on my Diamond. I've done all the usual searches but to no avail.
I've installed AEB and setup 'long press of volume up' to turn display on/off. This is so i can save battery life when i'm using gps software without losing my current gps positions.
The problem i have is that the volume up button i've configured only works on the main today screen. Once i'm into a program it does not work.
Have i done something wrong maybe or is it just not possible?
Thanks friends.
Anyone?
How can I make AEButton work other than just in today screen?
- sorry i am desperate!
The new tilt sensor program GSEN has an option to turn the screen off when you put the phone face down. It'll solve your problem...
My kaisers power button has split in half on me, Im wondering if i can change the PTT button to be the power button thru maybe a registry change or possibly another alternative. As u kno the power button blacks the screen and locks it so u cant push buttons, and i really dont want to dial in my pocket. Can someone please help me???? I dont want to throw away a prefectly good phone bcuz of a poorly made button. Thank you guys
well i took my phone apart and swapped the camera buton for the power button, but who knows how long this one will last. Does anyone know of any reg hacks, or software that will lock the phone on a button press maybe PTT button?
Very good that you have the technical ability to do what you did
In order to not use the power button so much I advise you to install a lock utility like S2U2 for example (I suggest it because I use it and it has a very nice interface). There are also smaller and lighter apps around. Just have a look.
In addition to that you have to change the key lock settings of the phone to "lock keys if phone is locked". This will enable you to wake the phone up with any key on the phone. In order to not activate any functions of the phone with this setting you have to set the timeout of S2U2 on wakeup to 0. This way S2U2 kicks in before any of the key functions come in.
By doing these things I am able to have a phone that does not dial in my pocket and I do not use the power button to wake it up. I use the wheel.
I hope this helps.
Factory Settings
Factory Settings
Accessed using code 126
Application
Hardware related settings (eg. canbus, dvd, tv)
Radio Band
Select radio band that works in your country
Car Logo
Change startup logo
Audio
Set default audio levels
Other
RDS: Display Radio Data System info for radio stations that support it
Front camera: Activate front camera (usb for inbuilt recording)
Wheel3: (possibly a poor transcription of freewheel) Affects the operation of the volume knob. If this is incorrectly set, the volume control will not work properly. Likely related to the type of rotary optical encoder used.
RGB LED: Button lights
Rudder: Lets HU know if car is left or right hand drive (eg. for displaying which car door is open)
Disable app install: Don't allow apps to be installed
Key light: Keys lit always or with illumination wire.
No wheelstudy:
Keymap option:
Touchmap options:
Reversing brightness: Change in screen brightness when reverse camera is activated
Why is this here? It's already in the Wiki.
mike.s said:
Why is this here? It's already in the Wiki.
Click to expand...
Click to collapse
Both this and mcu codes are in the wiki, this is just for others to comment on (more info/discussion) and also so it will appear in search
All of the MCU codes were not in the Wiki (they are now, because I added them).
What's there to discuss? If people want to add more detail to the Wiki, they can. For discussion of individual settings, a thread started with a copy/paste from the Wiki isn't a good beginning, and certainly doesn't add any new information. Adding yet another location to find the same information hurts, not helps, search.
Finally, the Wiki can be updated by anyone and doesn't require any individual to update their post as more info/knowledge is gained, and provides a single location users can refer to for common knowledge.
Can someone please explain what the Keymap option and Touchmap option actually do? Is this keyboard layouts etc? I've changed the options (only had unit 1 week so limited about of trying) but it didn't seem to do much?
Mr Bigglesworth said:
Can someone please explain what the Keymap option and Touchmap option actually do? Is this keyboard layouts etc? I've changed the options (only had unit 1 week so limited about of trying) but it didn't seem to do much?
Click to expand...
Click to collapse
I don't think anyone knows. Nothing seems to change haha
Would assume it changes the layout of hardware keys (button or touch)
Brendo said:
I don't think anyone knows. Nothing seems to change haha
Would assume it changes the layout of hardware keys (button or touch)
Click to expand...
Click to collapse
Glad it wasn't just me!
Mr Bigglesworth said:
Can someone please explain what the Keymap option and Touchmap option actually do? Is this keyboard layouts etc? I've changed the options (only had unit 1 week so limited about of trying) but it didn't seem to do much?
Click to expand...
Click to collapse
I know what keymap function does.
Option 1: If you open an app like radio and press home button it will close the app.
option 2: When you press the home button, it does not close the app anymore.
The rest of options I haven't tried!
Touchmap function .. I don't find any diferences beetwen the options. Maybe it's for units who don't have buttons?
Any update on exploring the keymap options? I'm not convinced that the above description is universal, as when I have option 1 set and press the home button it does not close the app.
I've been trying different options (1 - 10) however don't have any really good information, except to comment that it's impossible to turn on Wi-Fi when set to option 3.
Option 2 seems to really slow down performance of the machine.
I've really only had a chance to explore 1 - 3 but will continue through all 10. Please post if you have any particular experiences with various options.
In my unit in the button keymap you can set different functions to a hardware button, by pressing the required button twice.
i.e.
The SCR button opens av player by default.
I don't use it and want to start the music app.
So press SCR button twice and in that menu you can choose the Music icon.
Then it will start the music app with the SCR button.
Now you have to be really careful NOT to use the touch button option!!!!
This recallibrates the touch screen, and if you touch the screen then..... it totally screws up everything...
Only solution then is a reset and you can start all over again.
---------- Post added at 11:33 AM ---------- Previous post was at 11:19 AM ----------
Next thing NOT to do is in "others" tab.
There was some "power" option which default i think was "on".
Options there are "on" "of" and "remember last status" .
In my opinion the radio turned off to quickly, even when power down was set on 5 minutes (in android settings).
So i first saved this "power" thing in factory settings to "on".
Off course the radio stayed On after turning off ignition.
So i waited 5 -10 minutes, but it stayed on.
Then i made the biggest and most stupid mistake in my life and tried "off", and guess what.
It does not turn on anymore.... ****** (I should have guessed that).
According to the helpdesk, the radio should start in recovery when holding reset for 3-5 seconds.
But the button backlight (red colour) only blinks once when you release reset, and that is it.
Holding the power button for 10 seconds turns on button backlight as long as you hold the button.
I did receive their latest firmware so i could flash it in recovery, but then it has to boot first...
Now i am waiting for the next answer from the helpdesk, but for now my unit is dead.
I hope this message helps others to prevent making the same mistake.
oh thanks i was wondering how to access that !
Hi, can you fix the problem?
lottumeb said:
In my unit in the button keymap you can set different functions to a hardware button, by pressing the required button twice.
i.e.
The SCR button opens av player by default.
I don't use it and want to start the music app.
So press SCR button twice and in that menu you can choose the Music icon.
Then it will start the music app with the SCR button.
Now you have to be really careful NOT to use the touch button option!!!!
This recallibrates the touch screen, and if you touch the screen then..... it totally screws up everything...
Only solution then is a reset and you can start all over again.
---------- Post added at 11:33 AM ---------- Previous post was at 11:19 AM ----------
Next thing NOT to do is in "others" tab.
There was some "power" option which default i think was "on".
Options there are "on" "of" and "remember last status" .
In my opinion the radio turned off to quickly, even when power down was set on 5 minutes (in android settings).
So i first saved this "power" thing in factory settings to "on".
Off course the radio stayed On after turning off ignition.
So i waited 5 -10 minutes, but it stayed on.
Then i made the biggest and most stupid mistake in my life and tried "off", and guess what.
It does not turn on anymore.... ****** (I should have guessed that).
According to the helpdesk, the radio should start in recovery when holding reset for 3-5 seconds.
But the button backlight (red colour) only blinks once when you release reset, and that is it.
Holding the power button for 10 seconds turns on button backlight as long as you hold the button.
I did receive their latest firmware so i could flash it in recovery, but then it has to boot first...
Now i am waiting for the next answer from the helpdesk, but for now my unit is dead.
I hope this message helps others to prevent making the same mistake.
Click to expand...
Click to collapse
Hi, can you fix the problem?
I think the same thing happened to me, I tried to restart in all the ways and I do not get anything, always the black screen.
If you managed to fix it, could you tell me how you did it?
Thank you and receive a warm greeting.
AbelEvelio said:
Hi, can you fix the problem?
I think the same thing happened to me, I tried to restart in all the ways and I do not get anything, always the black screen.
If you managed to fix it, could you tell me how you did it?
Thank you and receive a warm greeting.
Click to expand...
Click to collapse
oh, I do same stupid thing, have any solution?
thank for advance help....
jonesweng said:
oh, I do same stupid thing, have any solution?
thank for advance help....
Click to expand...
Click to collapse
I did the same. However, I inserted a pin into the reset (RST) hole of my unit and it came back up fortuntately....
Anyone knows how to change the led color buttons?
jonesweng said:
oh, I do same stupid thing, have any solution?
thank for advance help....
Click to expand...
Click to collapse
i'm too, any solution ?
can anybody help to fix the problem ?
lottumeb said:
In my unit in the button keymap you can set different functions to a hardware button, by pressing the required button twice.
i.e.
The SCR button opens av player by default.
I don't use it and want to start the music app.
So press SCR button twice and in that menu you can choose the Music icon.
Then it will start the music app with the SCR button.
Now you have to be really careful NOT to use the touch button option!!!!
This recallibrates the touch screen, and if you touch the screen then..... it totally screws up everything...
Only solution then is a reset and you can start all over again.
---------- Post added at 11:33 AM ---------- Previous post was at 11:19 AM ----------
Next thing NOT to do is in "others" tab.
There was some "power" option which default i think was "on".
Options there are "on" "of" and "remember last status" .
In my opinion the radio turned off to quickly, even when power down was set on 5 minutes (in android settings).
So i first saved this "power" thing in factory settings to "on".
Off course the radio stayed On after turning off ignition.
So i waited 5 -10 minutes, but it stayed on.
Then i made the biggest and most stupid mistake in my life and tried "off", and guess what.
It does not turn on anymore.... ****** (I should have guessed that).
According to the helpdesk, the radio should start in recovery when holding reset for 3-5 seconds.
But the button backlight (red colour) only blinks once when you release reset, and that is it.
Holding the power button for 10 seconds turns on button backlight as long as you hold the button.
I did receive their latest firmware so i could flash it in recovery, but then it has to boot first...
Now i am waiting for the next answer from the helpdesk, but for now my unit is dead.
I hope this message helps others to prevent making the same mistake.
Click to expand...
Click to collapse
I was find a solution:
HU can't start, because in the config file there is mistaken option with power service turned off.
You need to find a MCU file (DMCU.IMG) and MCU CONFIG (DMCU.CFG) file and make an HU update in the recovery. mode.
Put these files on the SD card and flash MCU.
Link to the MCU CONFIG file:
https://forum.xda-developers.com/and...-mcus-t3624724
Link do the MCU file:
https://forum.xda-developers.com/and...essor-t3834657
REMEMBER - YOU MUST GET FILES TO YOUR HEAD UNIT - but you can try different, your HU is dead now anyway...
Oh Crap
--------------------------Then i made the biggest and most stupid mistake in my life and tried "off", and guess what.
It does not turn on anymore.... ****** (I should have guessed that).-------------------
Did you ever get it working again? Unfortunately i just made the same mistake and really hoping its not a paper weight :crying:
Updated my MCU KLD v3.01 on my PX5 and there is now an option for a carplay dongle. I have one so I checked the box. Have no idea what is changed because everything was already working but I am hoping someone smarter then me will tell me.
KAOS313 said:
Updated my MCU KLD v3.01 on my PX5 and there is now an option for a carplay dongle. I have one so I checked the box. Have no idea what is changed because everything was already working but I am hoping someone smarter then me will tell me.
Click to expand...
Click to collapse
Awesomes, but just wondering what this has to do with MTCB units?