How do I restore the original comm manager? I tried installing shaps 10 button to get the 3g/edge toggle. At first the button was there, now there are only 9. Try to reinstall, says "unsuccessful - insufficient system permissions...
totally lost.
Please help if possible. I'm afraid I might have to do the hard reset. I haven't been able to get 3g since I did this. Two parter now:
1.) How do I get the original comm manager back?
2.) Is there a registry setting to enable/disble 3g so I can check that?
Thank you.
i had the same problem try soft reset and then do it again, because i installed some cabs and then the comm cab and it sayed the same thing, then i soft reset and it let me and said your device must be reset then it worked fine.
i am also having the same problem.... i have tried soft reseting and reinstalling the file but all that i am getting is the same message...
i have even tried using the restorecomm.reg file, but every time i browse to it and click on the file its always giving me a " no program associated message"
is there anyway to restore the original comm manager and still be able to install a new one?
you can use schap's advanced config tool to change the style and the buttons of the comm manager
your problem is that you have your comm manager running. Go to memory and then stop the comm manager form running. Then you can reinstall it.
I suggest getting Dutty's black comm manager. It has worked the best for me.
SlimJ87D said:
your problem is that you have your comm manager running. Go to memory and then stop the comm manager form running. Then you can reinstall it.
I suggest getting Dutty's black comm manager. It has worked the best for me.
Click to expand...
Click to collapse
how do i go into memory and stop the comm manager from running, or do you mean start up? or running in the background?
ChInEsE ChIcKeN said:
how do i go into memory and stop the comm manager from running, or do you mean start up? or running in the background?
Click to expand...
Click to collapse
"Memory" is the name of a program on the System tab of the Settings screen.
is there anyway to completely delete the comm manager that is installed and just restore the original and start from scratch?
roverman said:
How do I restore the original comm manager? I tried installing shaps 10 button to get the 3g/edge toggle. At first the button was there, now there are only 9. Try to reinstall, says "unsuccessful - insufficient system permissions...
totally lost.
Click to expand...
Click to collapse
First when installing a new Comm manager make sure that it's not actively running. My suggestion. Soft reset your phone then install the comm manager of your choice. Hope this helps.
AllTheWay said:
First when installing a new Comm manager make sure that it's not actively running. My suggestion. Soft reset your phone then install the comm manager of your choice. Hope this helps.
Click to expand...
Click to collapse
I was having the same problems. This solution worked!!!
Related
Guys,
I'm not able to remove any programs via activesync from my wizard.
I can see the programs listed in activesync but I can't remove any of the installed programs; it's driving me crazy!
Please help!
Cheers,
Arne
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Have the same problem, Windows can not delete programfiles. When i install an update of a program, the setup failed. If i delete files manualy i can install the update. Had the same problem with original rom.
hellejoep said:
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Click to expand...
Click to collapse
Try....
Start > Settings > System > Remove Programs.
This should do what you are after.
my dear friend thats the problem....by doing any of the above i cannot uninstall any programmes ...it say cant remove programmes but do u delet it from your list of removable progrrames...funny
Same here. Minimo would not uninstall
went to remove prog. it said it did but all it did was remove it from the remove programs list.
Hard reset here we go. Pocket mechanic was the same for me.
It's ok when you exactly know where the program is installed - you should simply delete its files. But how can I upgrade to .NET CF 2.0?
Installer can't remove previous version and I can't delete files manually cause I don't know what files to delete :-(
I've had the same problem trying to remove minimo and the Atomic Cannons Demo. :? So far these are the only items I have tried to uninstall. I just deleted the folders and shortcuts, but I'd rather figure out what's causing the problem!
Running the QTek test ROM (WWE) on a US Tmo MDA.
I also have that. however most of the time it works for me to soft-reset and then remove. for some reason that works (for me)
I would recommend a soft reset just prior to removing software from a WM5 PPC. WM5 only minimises most programs instead of closing them when you click the X so the application stays open therefore files are still in use which prevents a successful removal.
Even if the progam has been closed by Start>Settings>System>Memory>Running Programs or a task manager like in SPB Pocket Plus there is a chance that there are still associated files locked open unless a soft reset is done before uninstall. Windows Applications on the desktop will normally prompt for a restart after uninstall if files were in use however it looks like the majority of Windows Mobile apps (or Windows itself) dont have the same functionality (some Mobile apps do prompt for restart but not very many).
Also, apps with today screen plugins should be disabled, before a soft reset then uninstall the app as WM seems to lock the files open when active on today screen as well.
I havent had the uninstall error once since i have done a soft reset before uninstalling any software, hopefully others will have the same success. I know this wont apply to every situation but so far so good for me. :wink:
Cheers
Chris
Puckster is right.Run your task manager to see all runing programs and close them before trying to uninstall or simply soft reset prior to uninstall.It works without a flaw.
I tried to install dutythroy_black-3g-comm-manager_.cab.fixed and I install it to the SC card. However when I tried to remove that software the Kaiser said that it was no able to remove it and do you want that it been removed from programs list...
Now my comm manager is corrupted and it shows only one choice in the upper left corner.
I already tried to run restorecom.reg but it didn't help. Any way to run original comm manager cab installation or do something else which helps me...
Also... I tried some other Latest cabs like task manager & windows live and both of these says that it hase been mentioned older windows mobile device?? Is this only warning not to be worried or did I something wrong?
Gotta raise this because I have a problem...
Plz... anybody could help me?
Anybody could make a copy what are original registry settings of Comm Manager... if that would help...
PeeHoo, why would you install a core function like the Comm Manager to the SD Card? That's asking for problems like you now have. Do a hard reset and try again.
Thx for wise answer!!
I did so!! But after I uninstall this dutythrow 3g comm manager. if you read my question more carefully you can read what I wrote... However there was mistake of written english (SC was mentioned SD) and word install should be I installed....
This hard reset answer is really nice... anybody really can help? I do know that HR help but I am trying to avoid that...
Unless you can write a cab, or bribe someone into doing, to reinstall the original skin, which I'm sure you copied before replacing right?, you're screwed.
This is where SPB Back up really helps!
You may not like the answers you get, but most of the people here won't lead you astray. Easiest way is to HR. You can try backing up now with SPB & then hard reset. The customazation cabs should replace & stick.
i'm on the the stock htc rom on my unbranded kaiser, and when i try to install this new camera software or a new comm manager, it doesn't allow it.
is there a cab to relax security settings, or is this something i do myself. thanks
eric b
maybe you just have to do a softreset and not opening the comm manager before installing.
afaik comm manager leaves some files opened when it's once started and then you can't overwrite them because they're in use... hth...
petervbeck said:
maybe you just have to do a softreset and not opening the comm manager before installing.
afaik comm manager leaves some files opened when it's once started and then you can't overwrite them because they're in use... hth...
Click to expand...
Click to collapse
thats right, and the camera does the same.
just soft-reset and then install
I have recently installed Duttythroy 3g Comm Manger. After installing it did not work. It went to a black checkered screen with nothing on it. So I removed the program. Now when I select my Comm Manager icon it still pulls up this non working menu and I have no way to access my comm manager. Can someone please help?
Hard reset?
What ROM and radio are you using? Have you tried reinstalling a cab of your previous comm manager?
Did you make sure it wasn't running & then reset after installing???
use the advanced configuration tool (search for it in the Kaiser upgrading forum)
Hey guys,
I have tried installing many different comm managers, but all give me this message:
"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Does someone have a way out.
Terence
dude soft reset and then install it.
this is happening cause you have the comm manager open
NFRCER said:
dude soft reset and then install it.
this is happening cause you have the comm manager open
Click to expand...
Click to collapse
Thanks man.
Worked immediately.