Hey guys,
I have tried installing many different comm managers, but all give me this message:
"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Does someone have a way out.
Terence
dude soft reset and then install it.
this is happening cause you have the comm manager open
NFRCER said:
dude soft reset and then install it.
this is happening cause you have the comm manager open
Click to expand...
Click to collapse
Thanks man.
Worked immediately.
Related
I tried to install dutythroy_black-3g-comm-manager_.cab.fixed and I install it to the SC card. However when I tried to remove that software the Kaiser said that it was no able to remove it and do you want that it been removed from programs list...
Now my comm manager is corrupted and it shows only one choice in the upper left corner.
I already tried to run restorecom.reg but it didn't help. Any way to run original comm manager cab installation or do something else which helps me...
Also... I tried some other Latest cabs like task manager & windows live and both of these says that it hase been mentioned older windows mobile device?? Is this only warning not to be worried or did I something wrong?
Gotta raise this because I have a problem...
Plz... anybody could help me?
Anybody could make a copy what are original registry settings of Comm Manager... if that would help...
PeeHoo, why would you install a core function like the Comm Manager to the SD Card? That's asking for problems like you now have. Do a hard reset and try again.
Thx for wise answer!!
I did so!! But after I uninstall this dutythrow 3g comm manager. if you read my question more carefully you can read what I wrote... However there was mistake of written english (SC was mentioned SD) and word install should be I installed....
This hard reset answer is really nice... anybody really can help? I do know that HR help but I am trying to avoid that...
Unless you can write a cab, or bribe someone into doing, to reinstall the original skin, which I'm sure you copied before replacing right?, you're screwed.
This is where SPB Back up really helps!
You may not like the answers you get, but most of the people here won't lead you astray. Easiest way is to HR. You can try backing up now with SPB & then hard reset. The customazation cabs should replace & stick.
How do I restore the original comm manager? I tried installing shaps 10 button to get the 3g/edge toggle. At first the button was there, now there are only 9. Try to reinstall, says "unsuccessful - insufficient system permissions...
totally lost.
Please help if possible. I'm afraid I might have to do the hard reset. I haven't been able to get 3g since I did this. Two parter now:
1.) How do I get the original comm manager back?
2.) Is there a registry setting to enable/disble 3g so I can check that?
Thank you.
i had the same problem try soft reset and then do it again, because i installed some cabs and then the comm cab and it sayed the same thing, then i soft reset and it let me and said your device must be reset then it worked fine.
i am also having the same problem.... i have tried soft reseting and reinstalling the file but all that i am getting is the same message...
i have even tried using the restorecomm.reg file, but every time i browse to it and click on the file its always giving me a " no program associated message"
is there anyway to restore the original comm manager and still be able to install a new one?
you can use schap's advanced config tool to change the style and the buttons of the comm manager
your problem is that you have your comm manager running. Go to memory and then stop the comm manager form running. Then you can reinstall it.
I suggest getting Dutty's black comm manager. It has worked the best for me.
SlimJ87D said:
your problem is that you have your comm manager running. Go to memory and then stop the comm manager form running. Then you can reinstall it.
I suggest getting Dutty's black comm manager. It has worked the best for me.
Click to expand...
Click to collapse
how do i go into memory and stop the comm manager from running, or do you mean start up? or running in the background?
ChInEsE ChIcKeN said:
how do i go into memory and stop the comm manager from running, or do you mean start up? or running in the background?
Click to expand...
Click to collapse
"Memory" is the name of a program on the System tab of the Settings screen.
is there anyway to completely delete the comm manager that is installed and just restore the original and start from scratch?
roverman said:
How do I restore the original comm manager? I tried installing shaps 10 button to get the 3g/edge toggle. At first the button was there, now there are only 9. Try to reinstall, says "unsuccessful - insufficient system permissions...
totally lost.
Click to expand...
Click to collapse
First when installing a new Comm manager make sure that it's not actively running. My suggestion. Soft reset your phone then install the comm manager of your choice. Hope this helps.
AllTheWay said:
First when installing a new Comm manager make sure that it's not actively running. My suggestion. Soft reset your phone then install the comm manager of your choice. Hope this helps.
Click to expand...
Click to collapse
I was having the same problems. This solution worked!!!
i'm on the the stock htc rom on my unbranded kaiser, and when i try to install this new camera software or a new comm manager, it doesn't allow it.
is there a cab to relax security settings, or is this something i do myself. thanks
eric b
maybe you just have to do a softreset and not opening the comm manager before installing.
afaik comm manager leaves some files opened when it's once started and then you can't overwrite them because they're in use... hth...
petervbeck said:
maybe you just have to do a softreset and not opening the comm manager before installing.
afaik comm manager leaves some files opened when it's once started and then you can't overwrite them because they're in use... hth...
Click to expand...
Click to collapse
thats right, and the camera does the same.
just soft-reset and then install
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
Hi,
Trying to install this cab to my Kaiser but keep getting the following...
"Installation was unsuccessful. the program or setting cannot be installed because it does not have sufficient system permissions"
Any ideas please...
Jay
Jay-La-Funk said:
Hi,
Trying to install this cab to my Kaiser but keep getting the following...
"Installation was unsuccessful. the program or setting cannot be installed because it does not have sufficient system permissions"
Any ideas please...
Jay
Click to expand...
Click to collapse
You need to Kill the CommManager.exe process before the install. Either use one of the Task Managers, or just soft reset then install the CAB straight after.
Ta
Dave
DaveShaw said:
You need to Kill the CommManager.exe process before the install. Either use one of the Task Managers, or just soft reset then install the CAB straight after.
Ta
Dave
Click to expand...
Click to collapse
Cheers Dave,
The soft reset option worked a treat...
Much appreciated...
Jay