Schaps Kaiser Comm Manager - Tilt, TyTN II, MDA Vario III Themes and Apps

Hi,
Trying to install this cab to my Kaiser but keep getting the following...
"Installation was unsuccessful. the program or setting cannot be installed because it does not have sufficient system permissions"
Any ideas please...
Jay

Jay-La-Funk said:
Hi,
Trying to install this cab to my Kaiser but keep getting the following...
"Installation was unsuccessful. the program or setting cannot be installed because it does not have sufficient system permissions"
Any ideas please...
Jay
Click to expand...
Click to collapse
You need to Kill the CommManager.exe process before the install. Either use one of the Task Managers, or just soft reset then install the CAB straight after.
Ta
Dave

DaveShaw said:
You need to Kill the CommManager.exe process before the install. Either use one of the Task Managers, or just soft reset then install the CAB straight after.
Ta
Dave
Click to expand...
Click to collapse
Cheers Dave,
The soft reset option worked a treat...
Much appreciated...
Jay

Related

removing programs from wizard

Guys,
I'm not able to remove any programs via activesync from my wizard.
I can see the programs listed in activesync but I can't remove any of the installed programs; it's driving me crazy!
Please help!
Cheers,
Arne
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Have the same problem, Windows can not delete programfiles. When i install an update of a program, the setup failed. If i delete files manualy i can install the update. Had the same problem with original rom.
hellejoep said:
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Click to expand...
Click to collapse
Try....
Start > Settings > System > Remove Programs.
This should do what you are after.
my dear friend thats the problem....by doing any of the above i cannot uninstall any programmes ...it say cant remove programmes but do u delet it from your list of removable progrrames...funny
Same here. Minimo would not uninstall
went to remove prog. it said it did but all it did was remove it from the remove programs list.
Hard reset here we go. Pocket mechanic was the same for me.
It's ok when you exactly know where the program is installed - you should simply delete its files. But how can I upgrade to .NET CF 2.0?
Installer can't remove previous version and I can't delete files manually cause I don't know what files to delete :-(
I've had the same problem trying to remove minimo and the Atomic Cannons Demo. :? So far these are the only items I have tried to uninstall. I just deleted the folders and shortcuts, but I'd rather figure out what's causing the problem!
Running the QTek test ROM (WWE) on a US Tmo MDA.
I also have that. however most of the time it works for me to soft-reset and then remove. for some reason that works (for me)
I would recommend a soft reset just prior to removing software from a WM5 PPC. WM5 only minimises most programs instead of closing them when you click the X so the application stays open therefore files are still in use which prevents a successful removal.
Even if the progam has been closed by Start>Settings>System>Memory>Running Programs or a task manager like in SPB Pocket Plus there is a chance that there are still associated files locked open unless a soft reset is done before uninstall. Windows Applications on the desktop will normally prompt for a restart after uninstall if files were in use however it looks like the majority of Windows Mobile apps (or Windows itself) dont have the same functionality (some Mobile apps do prompt for restart but not very many).
Also, apps with today screen plugins should be disabled, before a soft reset then uninstall the app as WM seems to lock the files open when active on today screen as well.
I havent had the uninstall error once since i have done a soft reset before uninstalling any software, hopefully others will have the same success. I know this wont apply to every situation but so far so good for me. :wink:
Cheers
Chris
Puckster is right.Run your task manager to see all runing programs and close them before trying to uninstall or simply soft reset prior to uninstall.It works without a flaw.

Someone Please Help Me :) (ExtROM question)

Alright.
Here is what I have done up until now.
I searched this forum trying to find out how to unlock my ExtRom.
I found this http://forum.xda-developers.com/showpost.php?p=1424566&postcount=374
I downloaded the zip files followed the directions and NADA. It keeps giving me some error.
I am a pretty smart cookie. I have been a network engineer for 8 years. I will be more then willing to help someone else out who can help me.
Thanks in advance
David
Just be sure to install the CAB's on the device, and soft reset after every install. Never managed to make it NOT work on my Treo
K i installed both. And did a soft reset after each one.
Now what?
Use Total Commander to empty the ExtendedRom
davestercrombie said:
K i installed both. And did a soft reset after each one.
Now what?
Click to expand...
Click to collapse
launch the unlock sw you find in programs
softreset
delete the files in extrom
softreset
the files in extrom are gone ? ---> hardreset
the files in extrom are still here ----> recheck the previous step(s) and try again
One little question...
works in WM5?
The Solutor said:
launch the unlock sw you find in programs
softreset
delete the files in extrom
softreset
the files in extrom are gone ? ---> hardreset
the files in extrom are still here ----> recheck the previous step(s) and try again
Click to expand...
Click to collapse
That was exactly the pattern I followed about a dozen times, but continued to get 2 different error messages which told me to soft reset and try again every time I tried to launch the extendedROM application in Programs. Since I wouldn't have lost much more time to reflash my 750 if the worst happened, I took the chance of deleting the extendedROM files and partition with the standard File Explorer and hard reset the unit. Now, it's plain vanilla and no hiccups.
I get a error.
Insetkey failed when i run the prgram in the programs.
it says please reset the device then do it again.
I hit the reset button do it again and same error.
Any better ideas?
Do it again 3 or 4 times and more (if you get same message).
Then, you will see the another message.
I did it 100 times reset it I dozen times..
It does not work at all.
Is there another work around???
I got the Extended rom to work, but my questions are such...
what exactly does the extended rom do?
what is the benefits of having extended rom?
and is there a way to have more than 8.57 mb?
davestercrombie said:
I did it 100 times reset it I dozen times..
It does not work at all.
Is there another work around???
Click to expand...
Click to collapse
same here. ran the unlocker many times with reset after each.
first message is "insertkey failed! please reset device then do it again"
followed by "changeprotectiontypefailed. please reset device then do it again"
followed by "unprotect finish! please reset device"
after rest I still see all the 3 stuff and only UMTS in the Band Selection. does this mean it's not unlocked?
I manually deleted the 2 files from the Partition under Extended Rom, using File Explorer.
Am I missing something?
Any help will be appreciated.
Y.
After removing the 2 files from the unlocked ExtROM, should a small 32k filenamed 'ExtROMCopy.exe' remane under the Windows dir? Viewiing its properties from Resco shows the file is in Rom and is Read-only, fwiw.
Jubri said:
One little question...
works in WM5?
Click to expand...
Click to collapse
Anyone managed to get it to work it WM5?
lifes2short said:
That was exactly the pattern I followed about a dozen times, but continued to get 2 different error messages which told me to soft reset and try again every time I tried to launch the extendedROM application in Programs. Since I wouldn't have lost much more time to reflash my 750 if the worst happened, I took the chance of deleting the extendedROM files and partition with the standard File Explorer and hard reset the unit. Now, it's plain vanilla and no hiccups.
Click to expand...
Click to collapse
So are you saying that it is not necessary to do the whole ExtRom unlocker thing??
Using file explorer, I found the files "ExtROMcopy" @ 32.1K but I don't see any way to delete it. I cannot find any type of partition. I also found "AT&T Icons" @82.2K and it is possible to delete that one. Or am I totally missing the boat somehow......

Comm Manager is corrupted, HELP plz

I tried to install dutythroy_black-3g-comm-manager_.cab.fixed and I install it to the SC card. However when I tried to remove that software the Kaiser said that it was no able to remove it and do you want that it been removed from programs list...
Now my comm manager is corrupted and it shows only one choice in the upper left corner.
I already tried to run restorecom.reg but it didn't help. Any way to run original comm manager cab installation or do something else which helps me...
Also... I tried some other Latest cabs like task manager & windows live and both of these says that it hase been mentioned older windows mobile device?? Is this only warning not to be worried or did I something wrong?
Gotta raise this because I have a problem...
Plz... anybody could help me?
Anybody could make a copy what are original registry settings of Comm Manager... if that would help...
PeeHoo, why would you install a core function like the Comm Manager to the SD Card? That's asking for problems like you now have. Do a hard reset and try again.
Thx for wise answer!!
I did so!! But after I uninstall this dutythrow 3g comm manager. if you read my question more carefully you can read what I wrote... However there was mistake of written english (SC was mentioned SD) and word install should be I installed....
This hard reset answer is really nice... anybody really can help? I do know that HR help but I am trying to avoid that...
Unless you can write a cab, or bribe someone into doing, to reinstall the original skin, which I'm sure you copied before replacing right?, you're screwed.
This is where SPB Back up really helps!
You may not like the answers you get, but most of the people here won't lead you astray. Easiest way is to HR. You can try backing up now with SPB & then hard reset. The customazation cabs should replace & stick.

TILT, how to restore original comm manager?

How do I restore the original comm manager? I tried installing shaps 10 button to get the 3g/edge toggle. At first the button was there, now there are only 9. Try to reinstall, says "unsuccessful - insufficient system permissions...
totally lost.
Please help if possible. I'm afraid I might have to do the hard reset. I haven't been able to get 3g since I did this. Two parter now:
1.) How do I get the original comm manager back?
2.) Is there a registry setting to enable/disble 3g so I can check that?
Thank you.
i had the same problem try soft reset and then do it again, because i installed some cabs and then the comm cab and it sayed the same thing, then i soft reset and it let me and said your device must be reset then it worked fine.
i am also having the same problem.... i have tried soft reseting and reinstalling the file but all that i am getting is the same message...
i have even tried using the restorecomm.reg file, but every time i browse to it and click on the file its always giving me a " no program associated message"
is there anyway to restore the original comm manager and still be able to install a new one?
you can use schap's advanced config tool to change the style and the buttons of the comm manager
your problem is that you have your comm manager running. Go to memory and then stop the comm manager form running. Then you can reinstall it.
I suggest getting Dutty's black comm manager. It has worked the best for me.
SlimJ87D said:
your problem is that you have your comm manager running. Go to memory and then stop the comm manager form running. Then you can reinstall it.
I suggest getting Dutty's black comm manager. It has worked the best for me.
Click to expand...
Click to collapse
how do i go into memory and stop the comm manager from running, or do you mean start up? or running in the background?
ChInEsE ChIcKeN said:
how do i go into memory and stop the comm manager from running, or do you mean start up? or running in the background?
Click to expand...
Click to collapse
"Memory" is the name of a program on the System tab of the Settings screen.
is there anyway to completely delete the comm manager that is installed and just restore the original and start from scratch?
roverman said:
How do I restore the original comm manager? I tried installing shaps 10 button to get the 3g/edge toggle. At first the button was there, now there are only 9. Try to reinstall, says "unsuccessful - insufficient system permissions...
totally lost.
Click to expand...
Click to collapse
First when installing a new Comm manager make sure that it's not actively running. My suggestion. Soft reset your phone then install the comm manager of your choice. Hope this helps.
AllTheWay said:
First when installing a new Comm manager make sure that it's not actively running. My suggestion. Soft reset your phone then install the comm manager of your choice. Hope this helps.
Click to expand...
Click to collapse
I was having the same problems. This solution worked!!!

Comm Managers Not Installing

Hey guys,
I have tried installing many different comm managers, but all give me this message:
"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Does someone have a way out.
Terence
dude soft reset and then install it.
this is happening cause you have the comm manager open
NFRCER said:
dude soft reset and then install it.
this is happening cause you have the comm manager open
Click to expand...
Click to collapse
Thanks man.
Worked immediately.

Categories

Resources