Hello guys;
I had a new HTC Wizard yesterday. It's a Orange M3000 French one. It has already loaded with 1.03 Rom.
My IPL : 1.03
My SPL: 1.03
I suppose that i have a G3 device.
According to this tutorial. http://forum.xda-developers.com/showthread.php?t=285435
I have firstly ran lokiwiz 0.2b, i have successfully sim-unlocked the device, then i re-ran lokiwiz for CID Unlock (SuperCID) which gave me:
"Your phone is now CID unlocked....".
Please note that my battery is fully charged.
Then i have downloaded T-Mobile 2.26 Rom, and started it. It recognized my device, it says that it will update my device, and it shows me the progress bar indicating that it can take 10 minutes.
The problem is, on this screen, it reboots my device, my battery light becomes orange, and 10 seconds later, the light goes off, and the device is turned off. Update utility gives me ERROR 260, Update ERROR.
I have to remove the battery, re-insert it to boot my device again. Please help me, i'm really stuck guys.
Cheers
etron45 said:
Hello guys;
I had a new HTC Wizard yesterday. It's a Orange M3000 French one. It has already loaded with 1.03 Rom.
My IPL : 1.03
My SPL: 1.03
I suppose that i have a G3 device.
According to this tutorial. http://forum.xda-developers.com/showthread.php?t=285435
I have firstly ran lokiwiz 0.2b, i have successfully sim-unlocked the device, then i re-ran lokiwiz for CID Unlock (SuperCID) which gave me:
"Your phone is now CID unlocked....".
Please note that my battery is fully charged.
Then i have downloaded T-Mobile 2.26 Rom, and started it. It recognized my device, it says that it will update my device, and it shows me the progress bar indicating that it can take 10 minutes.
The problem is, on this screen, it reboots my device, my battery light becomes orange, and 10 seconds later, the light goes off, and the device is turned off. Update utility gives me ERROR 260, Update ERROR.
I have to remove the battery, re-insert it to boot my device again. Please help me, i'm really stuck guys.
Cheers
Click to expand...
Click to collapse
No doubt it's a G3 device with ipl/spl 1.03,cuz G4 devices does not have ipl/spl 1.xx and as ipl/spl 1.xx is required to unlock phone using lokiwiz02b,there is no need to downgrade to 1.xx through button's rom 1.05
ERROR 260 : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
What is the status of your phone at present ?
Does it wok normal,it loads up the previous version of OS which installed with ? or it goes into bootloader mode(multicolor screen) ?
Well,if it works normal download WST tool and check the status of your phone whether it's CID locked or unlocked,but,if it goes into bootloader mode ,than download official carrier's Rom from it's website and get your phone into bootloader mode (multicolor screen) and flash it,it'll start normal and revert back to your default status,then check the CID lock/unlock and proceed further for upgrading as the guide instructs,cuz I presume your phone is not cid unlocked,good luck
Thanks for your kindly reply zabardast_1;
I've made a "Clear Storage" so it restored the previous ROM (i suppose). The previous OS is currrently running OK, booting up OK, showing IPL/SPL/RADIO values, reading my sim card. So when i'm testing the device with mestrini tools, (Wizard Service Tools), the output is:
Code:
Wizard Service Tool v4.2.1
20/10/07 14:10:05
CPU: Texas Instruments - OMAP850
MODEL: Wizard
=> Bootloaders:
IPL: 1.03 (G3 device)
SPL: 1.03 (G3 device)
Built on Sep 29 2005 at 14:49:19
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio: 01.04.10
Protocol: 4.0.13.17
=>Extended_ROM:
Version: 1.3.1.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
2e9eb472 - 10.00M (0xa00000)
aeae8ede - 48.23M (0x303c000)
afb2bf42 - 51.06M (0x3310000)
8fb2bd82 - 2.88M (0x2e0000)
2fb2bd5e - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000a51301022f060f9b0409059e
Key Index: 14
All Done.
Code:
Reading CID block...
Calculating CID block sum...
CID checksum: 36CC9888
Decrypted stored sum: EFD39CB041D1FD5D
Decrypted calcd sum: EFD39CB041D1FD5D
Key index : 14 - Block index: 44
CIDkey: MODULESN
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Please note that IEMI read on ROM and CID is the same, i have just removed them from copy-paste. There is something bizzare, because i have a formatted mini-SD card which is not recognized in drive & partitions. (it's a 512 mb mini-sd).
For going into Bootloader mode, I use the method above:
-> perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up.
When i try to make a soft reset, it works. The device restarts itself correctly.
When i push the reset button and try to hold the camera button, the device remains shut down.
I really don't understand what's happening. I really need some help. Thanks in advance.
Hello guys;
If someone reading this message, please read below for the solution if you have a Htc Wizard (Orange M3000) French with 1.03 ROM. (1.03 IPL / 1.03 SPL)
A Thread that contains exactly the same problem: here
Please read carefully "xeno1" response. When i was trying to go into bootloader mode, it was unsuccessful everytime. So turn off the device (not stand-by, turn off), then please remove your mini-sd storage card (if any), remove the usb cable. (Be sure that your battery is charged over %50, mine was over %90).
When done, push the camera button, then push the "power" button, wait a little while, when the device will come up, it will be in the bootloader mode,
(red, green, blue), and will show your IPL/SPL values. Connect up your USB cable. "USB" will appear on the bottom of the screen.
Now you are ready to flash your device. I'm pretty sure that you must follow the following tutorial for flashing.
http://forum.xda-developers.com/showthread.php?t=285435
I've downloaded Button Rom (1.05) and successfully flashed my device on bootloader mode. Please be patient when you're flashing your device, even
if %98. It can wait a little bit, 5 ~ 7 minutes. Enjoy!
Edit:
Once you have flashed with Button Rom, you can use lokiwiz 0.2b, or Wizard Service Tools for SIM Unlock + CID Unlocking operations. Once done, you can go to flash with T-Mobile 2.26 Rom. When flashing, it can also wait at %85, please be patient.
And thanks to XDA crew, forums members.
etron45 said:
Hello guys;
If someone reading this message, please read below for the solution if you have a Htc Wizard (Orange M3000) French with 1.03 ROM. (1.03 IPL / 1.03 SPL)
A Thread that contains exactly the same problem: here
Please read carefully "xeno1" response. When i was trying to go into bootloader mode, it was unsuccessful everytime. So turn off the device (not stand-by, turn off), then please remove your mini-sd storage card (if any), remove the usb cable. (Be sure that your battery is charged over %50, mine was over %90).
When done, push the camera button, then push the "power" button, wait a little while, when the device will come up, it will be in the bootloader mode,
(red, green, blue), and will show your IPL/SPL values. Connect up your USB cable. "USB" will appear on the bottom of the screen.
Now you are ready to flash your device. I'm pretty sure that you must follow the following tutorial for flashing.
http://forum.xda-developers.com/showthread.php?t=285435
I've downloaded Button Rom (1.05) and successfully flashed my device on bootloader mode. Please be patient when you're flashing your device, even
if %98. It can wait a little bit, 5 ~ 7 minutes. Enjoy!
Edit:
Once you have flashed with Button Rom, you can use lokiwiz 0.2b, or Wizard Service Tools for SIM Unlock + CID Unlocking operations. Once done, you can go to flash with T-Mobile 2.26 Rom. When flashing, it can also wait at %85, please be patient.
And thanks to XDA crew, forums members.
Click to expand...
Click to collapse
Thanks for the little tutorial and advise,glade you got it working.
That's why it has always been emphasized time and again to go through the concerned subforum and threads ,read and fully understand.It's all there in the forum,only it's upto you how to get it.You know now that you searched and you got it right,this is called 'Self help',cheers
etron45 said:
And thanks to XDA crew, forums members.
Click to expand...
Click to collapse
Congratulations on your progression in such a short time and on such great posts with precise info.
This forum would be much nicer with more 'newbies' like you... but then again so would be the world if we'd all be nicer to each other
cheers
Your tool WSS (Wizard Services Tool) is a great tool mestrini, it's more easier to use. A GUI is very helpful for a beginner than a text-based tool. Besides, lokiwiz is a great tool for the scene. Thanks for bringing these tools to our usage.
I have made some progress, at the beginning, i have searched "No Connection", "Error 262", 1.03/1.03, xeno1 post was really helpful. So if i can help other forum members with same situation, it's great. I think that we are here for sharing knowledge and experiences.
Is there is a way to modify the topics subject ?
etron45 said:
Your tool WSS (Wizard Services Tool) is a great tool mestrini, it's more easier to use. A GUI is very helpful for a beginner than a text-based tool. Besides, lokiwiz is a great tool for the scene. Thanks for bringing these tools to our usage.
I have made some progress, at the beginning, i have searched "No Connection", "Error 262", 1.03/1.03, xeno1 post was really helpful. So if i can help other forum members with same situation, it's great. I think that we are here for sharing knowledge and experiences.
Is there is a way to modify the topics subject ?
Click to expand...
Click to collapse
Tx for the compliment
And yes, you can change the topic just by editing your first post and changing its title
i bricked my imate kjam while upgrading to wm6.now strucked with bootloader screen.nothing can be done .please help.it shows ipl 2.16 and spl 2.16 on bootloader screen.it hapened when i tried upgrade to wm6 using sp5 upgrade tools.
Firstly, this is not brick. A brick is one that you can even power on the Wizard.
Flash with your K-Jam original ROM to get back your OS, then following the stickies in this forum to unlock your Wizard, then flash one of the WM6 ROMs here using bundled RUU application.
p.s I don't know what "sp5 update tools" is.
how to flash back my original rom in kjam.
Thanks for response.can u tell me where can i find step by step procedure for Flashing my K-Jam to original ROM to get back my OS, my ipl 2.16 and spl 2.16 . I dont want to do anything wrong from now.please tell.thanks.
sajipavithram said:
Thanks for response.can u tell me where can i find step by step procedure for Flashing my K-Jam to original ROM to get back my OS, my ipl 2.16 and spl 2.16 . I dont want to do anything wrong from now.please tell.thanks.
Click to expand...
Click to collapse
Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !
zabardast_1 said:
Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !
Click to expand...
Click to collapse
hi
I did the exact thing , I've got no errors during that but i still have a blue screen with these
IPL 2.16 , SPL 2.16 , GSM 02.07.10 , OS 2.16.9.1
what did i wrong?
thanks
hello, I am very new to this forum and also new to a windows phone. i will appreciate your patience and kindness to help me. I tried flashing an imate kjam using SOFTSPL. I am now stuck at the muilticolored screen displaying IPL 2.16.0001, SPL 1.06
I dont even know what to do now. i downloaded 'K-JAM_WWE_216901_2169101_020710_ship.zip' from rapidshare and when i tried loading its saying invalid vendor id. unfortunately we can access the clubimate website here in south africa.
Please help me gurus and evryone who has the mercy for me.
Thank you so much..
IPL 2.16.0001 = G4 and SPL 1.06 = G3 this means your phone is bricked.
To my knowledge nobody has recovered from this.
only ahmar sohail can do that
So ahmar sohail plz help my imate stuck and i love my fone
djkata1 said:
So ahmar sohail plz help my imate stuck and i love my fone
Click to expand...
Click to collapse
why do not you use WST to solve problems on your device..???
I've been trying to upgrade to WM& for hours now - problem is, my CID is locked , and I can't seem to get it unlocked. Lockiwiz won't work for me, as the app just closes once i run the CID unlock.
I've got the WIzard Service Tool installed, and it shows me:
IPL: 1.01 (G3 device)
SPL: 2.16 (G3 device)
now when I try to run the CID unlock (SuperCID) from there, the Service Tool tells me:
SPL version is 2.16.0000
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
Anyone got an idea what to do? are there any roms out there that will downgrade my SPL to < 1.06?
Thanks guys...
install IPL and SPL 3.08
Disagree.
Flash Button's 1.05 ROM several times more, and you should get a 1.0x SPL.
However, I suspect you didn't extract Lokiwiz correctly. Please confirm that you extracted it "with path", so you can see there is a folder inside the path you extracted.
hi starkwong
yep, i did extract it correctly, so i see the "Utils" folder. tried extracting it into a specific folder as well as C: root, still won't run...
any way to get SPL 1.05 without Lockiwitz?
I've read somewhere that the SPL info might be inaccurate so i think you should try to use lokiwiz anyway and see if it goes through...
Agree.
p.s. Make sure ActiveSync connection is established before running lokiwiz02.
Hi mates. i was using TNT WM 6.1 Rom. and now i tried to upgrade my device to TNT 6.1 v2. but my wizard stucked at bootloader after successful upgrae.
i have ipl 3.08 and spl 3.08. then i installed the Button rom. and with that my IPL goes to 1.01 and spl 3.08 but the button rom also stucked at bootloader after successful upgrade. this was happening first time.
so kindly help me with this situation. or if there is any other rescue rom. then plz send me link.
now my wizard always stuck at bootloader screen.
Regards
You can't go from 3.xx to 1.xx bootloaders
try to restore 3.xx
i have restored the IPL to 3.08 and SPL to 3.08 but still it freezes on the bootloader window where it displays the ipl spl gsm and os info.
what i will do now. to rescue my device. actually i want to enable rapi services. but wizard service tool is not working in bootloader mode. and the device is freezed at the info screen. so any other possibility to enable rapi. so i will reflash with shell tool.?
If the CID is already unlocked then follow drugstore's thread with the mtty solution
bro the CID is not already unlocked. i flashed many times with wizard love rom / button rom / & Xdaminiis rom. but all i got is only ipl changed to 1.01 but the spl remains 3.08 so i need to downgrade the spl as well. please help..
Thanks.
im in the same situation. ipl 1.XX.... and spl 3.08 ... its a wizard G4 ... and stuck on green info screen or bootloader. help !
OK all, I am new to this, I used the hard SPL-G4 to unlock (worked fine), then used rom update 2.5.2 to update my 8125 to SNN Diamond Edition WM 6.1 build 19209. When I boot, I get the spash screen then I get the three color screen and nothing...Did I just Brick this thing or am I missing a step here? Sorry for the stupidity...
Bryan
Phone booting into Bootloaders (tricolor screen) means its still working and not bricked.
Maybe the flash didn't go well and its a bad flash,try to flash again or it cud be that HardSPL cudn't get applied properly.What IPL/SPL it displays in Bootloaders ?
Shows IPL 2.21.001/SPL 2.25.001. Just hangs at the tri-color screen. With it in this mode how would I flash it again?
bboretsky said:
Shows IPL 2.21.001/SPL 2.25.001. Just hangs at the tri-color screen. With it in this mode how would I flash it again?
Click to expand...
Click to collapse
Is it ipl 2.21.001 or 2.21.0001 & spl 2.25.0001,note the 3 0's.
If there are only 2 0's then its a G4 device,you shudn't apply hardSPL but if there are 3 0's than HardSPL didn't get applied correctly,reflash the HardSPL.After the HardSPL the IPL shud look like 2.210001 & Spl 2.21 olip.
It is a G4 model
IPL 2.21.0001
and
SPL 2.25.0001
per the WIKI if I have the three '0' then it is a G4
Anyways, I tried conning via the usb to run the slftSPL but it cannot find the device. How do I proceed?
thanks.