I was updating my htc p3600, but it crash down at 6% and now I can't turn on it what can i do???
(sorry for my bad english i'm italian)
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
tried this?
...
the problem is that i can't enter in the bootloader, my trinity stop at multicolor screen
hard reset trin100
I did the same. the only option was hard reset for my m700. I managed to find the correct keys to press. this will wipe it as good as new.
press two buttons above the green/red telephones together at the same time and put stylus into hole nr usb port for reset.
it will give you a system message.
ok that and then green talk button to fin9sh
HI can any one help me pls. i cracked screen on my xda11s and decided to replace it , wich i did , but now the screen is stuck on white screen,i have tried hard reset and soft reset, when i turn on u can hear the ping noise, as if it is going to align ment screen, and when i do presss the record and power buttons, it makes asound but nothing still the white sceern, when i try to run mtty it goess to usb but then client, comes up 4 times and cannt do aanything ,ia hvae tryed all i can, can anyone pls help me, i wuold really appresicate anyones help, thankyou.
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
if you go the wiki page for this device it might help you out, or try searching google
shuman said:
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
Click to expand...
Click to collapse
try contacting GSLEON or Jockyw2001
Go here http://forum.xda-developers.com/showthread.php?t=393337 , download attached files and start from step 4
what kind rom are you using if its 6.0 then theres the problem flash to a 6.1 rom
How do I fix the rom 6.1? It is total dead seemz, not even power light! any help is much appreciated.
Did you try bootloader mode? Power+Camera+Soft reset button?
Kraize
I dont belive I tried the boot loader mode. I'll do that, however, what should I see if go into bootloader mode? what is the next step. Thanks everyone for their help, much appreciated.
No luck, I tried bootloader mode, same thing, all i get green power light and black screen!
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Hey,
any help with a Tri-colour screen problem?
other thing is, i can't tell where to read your reply from
Jerry
Hey,
can anyone help me with AT&T 8925 Tri-colour screen problem?
msn please @ [email protected] because I have no idea how to read the reply to this post, I'm new to all this..
It froze one day, soft reset and it came back in tri-screen. I plugged it into the charger and it worked..
Did that a few times now it won't do anything and it is stuck in tri-colour with:
KAIS1*0
SPL-1.93.000
CPLD-8
i didn't instal anything, it just locked up and not nothing I do, soft or hard reset will make it come back.
I also wanted to install an Australian OS to Telstra maybe, but not sure which ROM or RUU to download.
Can anyone help please, this is extremly important... and donations will be paid on completion of problem.
Thanks
jasonrush said:
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Click to expand...
Click to collapse
what if set can't conect with mtty and no conectivity with the pc and only green lights on the set?????
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
montreezy said:
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
Click to expand...
Click to collapse
Try following all these steps.
http://forum.xda-developers.com/showthread.php?t=433835
Hello, i`ve red a very big part of the forum, but didn`t find a problem similar to mine. So please help!
When i power on my Diamond (it takes more than 20 seconds to vibrate) instead of the logo and sound HTC it appears a white flickered screen. And that`s it. I can`t turn it off (only by removing the battery), i can`t connect to PC, tried soft, hard reset....nothing helps. It`s absolutely dead on the white screen. When this happened for the first time, i paid big time for a "Software update" that fixed the problem. But no one told me what it was and how they`ve fixed it. Than after a week, the same problem, when it was working...suddenly stopped responding, took the battery out and when i tried to turn it back on....white flickered screen....Unfortunately i don`t want to spend any more money on "HTC gurus" and if someone knows how to help me fix this, will be mostly appreciated.
Thanks in advance and sorry if this thread is not for here.
Help! Help! Help!
Hello peeps, my first thread as you can see and also a beginner to this Xperia phone!
Well, yesterday night I downloaded an upgrade through the "Windows mobile device center". I did exactly as it said, I followed the instructions and it did get complete. I was able to start the phone without any minor problems.
After a lil while when I did shut down the phone and tried to start it, it did start. I got to the sony ericsson logo and and 2 more stuffs after.
After the logo it said something similiar to "Click on the screen if you want to configure your windows mobile device" and something more. I clicked on the screen and I got somewhere where you have to point at a "plus" four times (through the whole screen), and to the problem it always reset at the same point tellin me to do the same thing!
It pisses me of, so please could any1 please try to help me.
I bought the phone yesterday!
When I push the lower sound and turn on button I get some info saying:
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
I have also tried to do a hard reset which is not possible anymore, only yesterday (two buttons down there and on/off together?) and I also did that thing where you have to put a stick beside the battery.
Yours. Freak
Fixed!
Please remove this thread.