Hello peeps, my first thread as you can see and also a beginner to this Xperia phone!
Well, yesterday night I downloaded an upgrade through the "Windows mobile device center". I did exactly as it said, I followed the instructions and it did get complete. I was able to start the phone without any minor problems.
After a lil while when I did shut down the phone and tried to start it, it did start. I got to the sony ericsson logo and and 2 more stuffs after.
After the logo it said something similiar to "Click on the screen if you want to configure your windows mobile device" and something more. I clicked on the screen and I got somewhere where you have to point at a "plus" four times (through the whole screen), and to the problem it always reset at the same point tellin me to do the same thing!
It pisses me of, so please could any1 please try to help me.
I bought the phone yesterday!
When I push the lower sound and turn on button I get some info saying:
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
I have also tried to do a hard reset which is not possible anymore, only yesterday (two buttons down there and on/off together?) and I also did that thing where you have to put a stick beside the battery.
Yours. Freak
Fixed!
Please remove this thread.
Related
Hello Gurus, please i need help...
i'm using an XDA IIs on WM2005 Helmi.
i was using my wifi browsing sites when suddenly my screen got garbled, its like the system has crashed or something, characters everywhere my screen and is moving really fast.
its no longer working so i did a soft reset by hitting the reset button, but after that my phone never opened again. i cant even get to bootloader.
sometimes it shows the color strips on startup but then again after sometime, my screen will slowly turn to white. then i wont be able to use it again.
does anyone of you had experienced this problem before? please, i need help.
once i got the chance to enter bootloader, so i reflashed to wm2003se. but after the flashing and pressed the reset, it started with the 02 logo, but then again turned white and just wont continue loading, as if it crashed. it always does this now. i have a useless unit.
Guys, help please... I'm dying to get my XDA to work again.. maybe some of you know the answer please spend a little time to reply. please.
This is a hardware issue, it may be battery, or mainboard, take your device to the nearest service
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
if you go the wiki page for this device it might help you out, or try searching google
shuman said:
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
Click to expand...
Click to collapse
try contacting GSLEON or Jockyw2001
Go here http://forum.xda-developers.com/showthread.php?t=393337 , download attached files and start from step 4
what kind rom are you using if its 6.0 then theres the problem flash to a 6.1 rom
How do I fix the rom 6.1? It is total dead seemz, not even power light! any help is much appreciated.
Did you try bootloader mode? Power+Camera+Soft reset button?
Kraize
I dont belive I tried the boot loader mode. I'll do that, however, what should I see if go into bootloader mode? what is the next step. Thanks everyone for their help, much appreciated.
No luck, I tried bootloader mode, same thing, all i get green power light and black screen!
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Hey,
any help with a Tri-colour screen problem?
other thing is, i can't tell where to read your reply from
Jerry
Hey,
can anyone help me with AT&T 8925 Tri-colour screen problem?
msn please @ [email protected] because I have no idea how to read the reply to this post, I'm new to all this..
It froze one day, soft reset and it came back in tri-screen. I plugged it into the charger and it worked..
Did that a few times now it won't do anything and it is stuck in tri-colour with:
KAIS1*0
SPL-1.93.000
CPLD-8
i didn't instal anything, it just locked up and not nothing I do, soft or hard reset will make it come back.
I also wanted to install an Australian OS to Telstra maybe, but not sure which ROM or RUU to download.
Can anyone help please, this is extremly important... and donations will be paid on completion of problem.
Thanks
jasonrush said:
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Click to expand...
Click to collapse
what if set can't conect with mtty and no conectivity with the pc and only green lights on the set?????
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
montreezy said:
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
Click to expand...
Click to collapse
Try following all these steps.
http://forum.xda-developers.com/showthread.php?t=433835
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.
Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!
tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.
still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!
1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.
Hello,
This is my first thread on XDA, because i'm having a problem with my Kaiser.
I'm sorry for my possible "silly" questions, but this a subject wich i'm not very good at.
I have a Kaiser, wich has a TPC Elite Rom Series
R 1.70.19.09
g 25.83.40.02h
d 3.28.00.00
And that runs on WM 6.5
Since last friday while i was configuring my mms settings, the device asked me to restart to assume the new settings. So i closed it down by pressing the power button until the message to "shut it down" appeared.
But when i tried to turn it on again, the device starts with the TPC Elite Rom Series screen, then it appears the data from the rom (mentioned above), then it moves to a screen with the Windows Phone message and logo and it stays here until i turn it off again.
So i cannot start my Kaiser and i need all the help i can get.
Thanks a lot to all of you that can give me a hand.
I already have done hard reset, but it keeps freezing on the "windows phone" screen.
try into three-colour screen and reflash ROM,or look here http://forum.xda-developers.com/showthread.php?t=423486
goodluck!
try into three-colour screen and reflash ROM,goodluck
this is also my first post here, can someone please help.
i tried to hardspl my htc kaiser, and failed miserably. i went through all the steps for hardspl but somewhere failed. during the setup when running the kaiser ruu file.on the cpu it said it was complete and for me to look to the phone to finish setup. on the phone it showed the linux penguin and a list of words scrolling down the screen. then it said error insert sd card. so i did then more words scrolled down the screen. then it said error again then the screen went black. after waiting an hour and nothing happened i took the battery out. then i tried to reload and the att logo would only show up. i read online how to get the tri colored screen back up and i got that by pressing the camera and power and reset button in.on the screen it says
kais1*0
spl-3.56.0000
cpld-8
and it doesnt respond to the computer. how do i re flash and get my phone working again someone please help if you can thank you
Hi there all,
I'm writting this help in Frustration, i'm trying to solve my lil bro problem. He has Sony Experia X1 running Windows mobile 6.1.
The problem is when it get's to the windows mobile 6.1 logo screen after boot up it freeze's! and i don't know where to go from here.
I've tried to sync it to the PC and nothing!
I've tried removing battery, holding down volume down button + power button, reinserting battering will on charge via wall and PC for 15min's, and removing batter and reinserting and booting again, and NOTHING!!!
i can't make any sence from it please help? What is the next step? Throw at the Wall?
Thankz to anyone that has the time
any details on what action lead to the problem? those normally don't come out of thin air...and maybe that helps finding a solution
what might otherwise help (but will erase customizations and personal data stored on the device) is a hard reset
Best, DK
Ok just found out he was trying to delete something a program, and he can't remember what program! About to try a hard reset now!!!
Also just found out, you/I can't even power it down/off!!! WTF?
Hard reset! Not working just the same thing, tried holding all button in with battery out then reinserted, and the screen went all funny like snow reception on tv?
And one time it come up with 4 colours on the screen, green, blue, red and white!
also when trying to connect to computer usb port it try's to load up but said the phone is locked???
vannav8 said:
Hard reset! Not working just the same thing, tried holding all button in with battery out then reinserted, and the screen went all funny like snow reception on tv?
And one time it come up with 4 colours on the screen, green, blue, red and white!
also when trying to connect to computer usb port it try's to load up but said the phone is locked???
Click to expand...
Click to collapse
strange, not sure about the snow like screen
the four color screen is the bootloader, you can that when the phone is off and you restart it while holding volume button down for some seconds
there is a quite helpful thread about hard resetting X1, listing different means to do so
have a look, maybe you find something you didn't try yet and it helps
Best, DK
thankz will try post again soon with result's
OK wierdiest thing ever!!!
after coming back to the phone a day later, the battery went flat, OK! charged mobile while it was in bootloader mode screen for 15 min's
Went to try hard reset and magic!!! It finally come up with this screen allowing me to reset by pressing R on the keypad, so i did then, it told me to press space.... waited, waited and waited. It got the better of me, took battery out, and reinserted...
It got further then before, but once again on further it hung there, so i took the battery out and reinserted and did this about 3 more times.
And now magic it works!!! I don't know whats going on i tried all these steps i've mentioned above and nothing had came of it, but now it works!!!
I'm backing the battery is the main issue, it got a lil hot but not to hot to handle, well im no expert i'll leave it with you's
Thankz again for all your help you could offer it did help
that is really weird but I'm very glad you got it going
enjoy