I can't see SPL ... Is is possible ??? - Wing, P4350 Herald Upgrading

Hi all ....
On my Herald i can't see IPL and SPL version in startup ...
Some days ago i see on forum an utility ( maybe heradiag ) for know IPL and SPL from device.
I can't found anymore ...
Someone can you help me ???
Thanx in advance
Skunknet

skunknet said:
Hi all ....
On my Herald i can't see IPL and SPL version in startup ...
Some days ago i see on forum an utility ( maybe heradiag ) for know IPL and SPL from device.
I can't found anymore ...
Someone can you help me ???
Thanx in advance
Skunknet
Click to expand...
Click to collapse
You see it when you go into bootloader.
Hold the camera button, the press in the soft reset button. Continue holding camera until rainbow screen shows up showing you your ipl/spl.

Related

Help Help Help!!!

Hi everyone! I am badly need help to fix my MDA. My MDA stuck when it boot up to T-mobile white screen. I tried to do hard reset by pressing and holding Conn Manager and Voiddial buttons while pressing reset then press Send. I got and message
Format FAT Partition
Format is Failed
Now I am still able to flsh with any ROM but I just doing the same thing, stuck on boot screen. Is it the end of my MDA? Please hel
Is it realy no one can help?
I don't believe that no one can help me even a command.
If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM
If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM
I don't get it
Johnnnnnnnnnny said:
If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM
Click to expand...
Click to collapse
What should I do? any rom for me to flash to solve this problem?
You could flash any originaly ROM with write IPL/SPL
and quicky. If the battery will turn off. the Wizard will bricked
I flash with right rom
Johnnnnnnnnnny said:
You could flash any originaly ROM with write IPL/SPL
and quicky. If the battery will turn off. the Wizard will bricked
Click to expand...
Click to collapse
I flashed with T-mobile ROM 2.26. It went thru 100% but when the device reboot, It just stuck on the T-mobile boot screen wich saying
IPL: 2.26
SPL: 2.26
GSM: 02.25.11
OS: 2.26.10.2
Finally
Finally I got my MDA fix.
Re: Finally
KhMeRA said:
Finally I got my MDA fix.
Click to expand...
Click to collapse
Please tell everyone what you did to fix your problem.
Molski
he was in bootloader.. He hasn´t brick her phone by wrong xG IPL/SPL
Re: Finally
molski said:
KhMeRA said:
Finally I got my MDA fix.
Click to expand...
Click to collapse
Please tell everyone what you did to fix your problem.
Molski
Click to expand...
Click to collapse
Just follow this link http://forum.xda-developers.com/viewtopic.php?t=62268&start=0&postdays=0&postorder=asc&highlight
please tell us whate happend (fixed or no )
sifreen said:
please tell us whate happend (fixed or no )
Click to expand...
Click to collapse
Read post #8 on the 1st page.

Wizard ( K-jam ) i-mate Splash screen freezing

Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
GSM system said:
Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
Click to expand...
Click to collapse
hi
Plz be specific from where did u download the official rom,which u said u tried to flash.was it from official i-mate club ftp site and what was the version of the rom u tried to install,cuz they don't have any upgraded version on this site apart from the last wm5 dated year 2006. i-mate is not offering any wm6 upgrade to any of its products.
secondly, which other rom u tried to flash afterwards?
as far as ur attached pics r,if u can reach to this screen than do not worry about the upgrade info,as it's sometime displayed and sometimes not,just hit the upgrade.
if it completes than it's alright,but if it stucks for a very long time and displays any error message.it means it has not upgraded.
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
GSM system said:
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
Click to expand...
Click to collapse
Goodluck,If it upgrades successfuly do let us know,
Btw, it's an ;ld wm5 Rom,why don't u upgrade to newer wm6 Roms ?
Brother ....the Same problem ...So what i don't you have another solution ..please
br
GSM system said:
Brother ....the Same problem ...So what i don't you have another solution ..please
br
Click to expand...
Click to collapse
ok,first plz post the exact details of ur k-jam,
1.IPL.....?
2.SPL....?
3.GSM...?
4.OS ver? ( Arabic or WWE)
secondly,tell what exactly happened and what error r u getting.
thirdly,what u want to upgrade to,I mean Arabic or English version of Rom ?
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
GSM system said:
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
Click to expand...
Click to collapse
ur phone's ipl/spl 2.16,it's a AKU 2 version,therefore check the rom with which ur trying to update shud also be aku2.the update rom shud be newer than the one already on ur phone.
So what i doing Now can you fined to me any solution plz ...
br
GSM system said:
So what i doing Now can you fined to me any solution plz ...
br
Click to expand...
Click to collapse
can you tell what exactly is the problem you are having at present is it that:-
1. you are not able to complete flash,it stops and give some error,if so then what error it shows ?
2.RUU starts to flash,but when it comes to the screen where it verifies the updating rom's info,there you don't see any info,as per your first post,than you discard the update?
3. is the version of the rom newer your are trying to update with then the one already on your device
plz verify these ?
Brother ... i am Sorry to bother you ..
1-about the flash my device is complet flash and the Computer tell me 100% congratulation .
2- the device don't accept factory Default
3- my device is freezing on splash screen. i-mate
many thanks ..
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
GSM system said:
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
Click to expand...
Click to collapse
Ok,lets try this way out,try to do a hard reset,to perform hard reset :-
1. Press and hold the Comm Manager button and Voice Command button on the device,than
2.While keeping the two buttons pressed with one hand, and at the same time,with other hand,use the stylus to lightly press and hold the soft reset button.
the device will reboot and restart again,see if it starts to work alright.If still freezes at the splash screen,than I'll suggest you do this,it really sometimes help and I have solved my problem so many times by doing this :-
Reboot your PC, run disk clean on Drive C:\,delete all the Temporary internet files,Temp files rather check mark all the options in the disk clean wizard option and hit ok,this will delete all the junk files from your PC,now delete all the cookies in the internet options,after doing all this,switch on your phone and go into Bootloader mode(tri color screen),when there than connect your phone to the pc using usb cable but don't active sync your phone,cancell active sync if need be,when you connect your phone with pc via usb,look at the screen of your phone you will see a little usb shown at the bottom of the screen.
Now open the rom which you downloaded and execute the Ruu..,it will start to flash,let it complete ,it will confirm flash and reboot,it start now and work normal, I hope,it will solve this problem remember don't do anything else with the pc like browsing the web or reading e-mails,playing games or working on Microsoft office,don't touch you pc and phone while the rom flashes.
Well,there is another way also,but as you want the official arabic version rom on your phone,do it first as i told you above,if it works,good,otherwise we will do the second method good luck
Amazed !
Hmmm, sry to say I observed you joined this forum on Dec,2006 and posted 57 times,just went through your posts and was amazed that you already have gone through this unlocking and upgrading on different devices,well you seem to have quite knowledge about all this,than how come you are stuck with this problem now ?
I hope your not just kidding me ? or your are really stuck up and seeking help ?
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
GSM system said:
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
Click to expand...
Click to collapse
ok, what is the present status of your phone ? what ipl/spl...? it shows in bootloader mode ?
as you posted in another thread that you tried to flash wizard_love_rom,but did not succeed,earlier you only wanted to upgrade to an official arabic i-mate k-jam rom.Now do you want to upgrade to any rom ? by unlocking the phone ? or just want your phone to work by any means ? if yes,then there's another option to get your phone working,I really hope so.Plz confirm what you want to do now ?
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
GSM system said:
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
Click to expand...
Click to collapse
ERROR [294] : INVALID VENDER ID
these error messages appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device.
Well, as I can think,you had an Arabic rom version OS 2.16.9.1 Arabic on your phone before and tried to flash a wwe version rom.the bootloaders verified and did not accept the rom.So a bad flash and splash screen got freezed,the only way is to flash and try to downgrade to IPL/SPL 1.xx and CID unlock the device and upgrade to another rom to start working, or flash the official stock Arabic rom to bring back the phone to it's default status,but the official rom you downloaded and tried to flash was of the same OS version didn't flash correctly and got splash screen stuck.Therefore,the only option left at present is to try and downgrade it to IPL/SPL 1.xx.The options are :-
1.Try to flash again button's rom 'CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe ' Which you already have with you,a couple of times more and see if it might work,
2.Otherwise download this rom from the link below and flash,hope it'll work :-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
If successful,good,but if still fails,
3.there's still another option to flash the rom with replaced 'Romupdateutility' in the rom,which I'll explain how to do it later,
first try the option 1 & 2,lets hope it works,good luck
brother Many Thanks ..
I will do that and tell you ...also please if you can explam me how to flash the rom with replaced 'Romupdateutility'.....
respactfully
My friend Zabardast_1
please look this is the info befor i Downgrading with this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
now my device in Bootloader
IPL 2.16
SPL 2.16 ..
okay .... now i starting to downgrading ...my Device with this ROM CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
please note this pic i attached to you ... then after downrading ...this is my device info in bootloader .
IPL 1.01
SPL 2.16
now after i downgrading no thing happend just the splash screen change also i acctached to you image to see that ...
2nd step i tryed to flash my Device with this ROM Wizard_Love_2.26.10.2_WWE_Novii_CF2 what happend ( Error 300) also i attach to you image
now i wait your help ..please
respactfully

Wiza100 Ipl/spl

I tried to upgrade ipl/spl 3.08 on wiza100 ...
usb is working
no os is booting.. the same colored screen come... after every complete installation of any rom
the Colored show
IPL 2.21
SPL 3.08.0001
Can any one help me out ... plz plz plz plz...
Please dont double post
feerus said:
I tried to upgrade ipl/spl 3.08 on wiza100 ...
usb is working
no os is booting.. the same colored screen come... after every complete installation of any rom
the Colored show
IPL 2.21
SPL 3.08.0001
Can any one help me out ... plz plz plz plz...
Click to expand...
Click to collapse
Sounds to me like G3 with G4 files or the other way around...
thanks thanks thanks and thanks alot in advance ... i`ll try this and tell u if it worked .. wat a n00b i am
U have installed G3 spl/ipl to G4 device....dont ever do this again, ur lucky that u havent got a brick...next time read some threads to learn more, cause ur device has only one life hehe
dude nothing is worrking \
wizard service tool is not decting any device
neither the enab RAPI + unassigned app is decting :-S
what should i do next..
feerus said:
dude nothing is worrking \
wizard service tool is not decting any device
neither the enab RAPI + unassigned app is decting :-S
what should i do next..
Click to expand...
Click to collapse
Wizard service tools will not work in bootloader mode (multicolor screen) try to flash a rom and get the phone in working OS,only then it's possible to work with WST and any other application to operate.
Cheers !
re
i dunno how to flash a rom in a boot loader
re
actually i tried alot of roms but no one is working i have this cell fone
http://www.pdadb.net/index.php?m=specs&id=390
i dunno wether it is G3 or G4

HARD-SPL - working!

I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
b.mann said:
I've figured my issue out, maybe I can help the others that get the 202 Connection error.
On your device--BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox.
If it's not checked, most times you will get the 202 Connection error. Hard-SPL and you should be good to go!!
Click to expand...
Click to collapse
You may add Dopod C800 to the list
It's the real deal
Succesfully flashed my device under papamopps supervision and can verify that this HardSPL package is working 100%
Thanks again papamopps
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
Softreset your Herald and press the Camara butten until you see an Colerd screen it´s the Bootloader. there you will find the IPL and SPL on the screen. softreset your herald without pressing any butten and it will start normely to youre WM. You wont delete any data aslong you nothing Flash.
Ghostrider
stahlsau said:
heya, seems like i'll get my terra flashed then too. Nice one. Well, at least to some point...i almost fear to ask...how do i see if i have "IPL 4.xxx and higher"?
I've got Rom-version 4.11.207.1 GER, Protokoll-Version 4.1.13.39
TIA for help
*BTW, the rapidshare-link tells me "file not found".
Click to expand...
Click to collapse
link updated!
Thanks!!
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
aron4588 said:
yew i am hardspl but it change my boot screen oooo i have to reflash nvm
Click to expand...
Click to collapse
could you shareyour device information-so that we can see for which device it is working?!
It worked on my:
HTC p4350
It had: WM6 overclocked to 299Mhz (but i let it on Default 201Mhz When I was in de process)
It had de 4mb Page Pool.
Worked great!!! THanks man!
BTW- afteryou have Hard-SPL.
Never use an official RUU with included SPL.nbh (delete this ebfore flashing)
And never use the RUU from Hard-SPL
Allways use the included RUU or take an RUU without SPL.bnh when you onlycan download the ruu_wigned.nbh.
Regards
how to go back to stock?
i currently have hard spl with touchit 4.4
i want to go back to factory spl and factory ruu
can someone please help me?
thank you
i did it with t-mobile wing usa
aron4588 said:
i did it with t-mobile wing usa
Click to expand...
Click to collapse
I also was able to Hard-SPL my T-Mobile wing successfully in the US
and....
in the past ive always went stock b 4 flashing a new rom
what are the steps now to change to new roms? wheather it b hard spl or factory spl
thanks
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
EDIT: ehm... please... im am quite worried. (30 minutes in white screen :S)
johnny88 said:
I am waiting from 20 minutes with my phone in white screen mode... is it normal?
Click to expand...
Click to collapse
it should end after 10 or 15 minutes.
hope you installed all files before and softreset.....
yes all cabs...
during the install of hardspl the ruu install wizard shows a windows with "connection failure" and only an Exit button. I click on it while it is in white mode... I am still waiting...
What should I do? (wainting or reset?)
finally (after 40 minutes of white screen) I softreset with stylus...
It reboots normally as nothing was appened... better then brick.
I will try again later.
THX!
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
BouRRi_GSM said:
hi
when HTC P4350 is into bootloader mode, SPL and IPL are 1.08.0001
is it an older SPL or waht?
if yes can i update my P4350 to WM6 without using Hard-SPLWM6 ??
any idea?
anyone have a link to learn what's is exactly hard SPL, and the difference between HARD SPL and SOFT SPL
thx in advance
br
Click to expand...
Click to collapse
allways start with :
http://forum.xda-developers.com/showthread.php?t=327046
and then try one of this:
http://forum.xda-developers.com/showthread.php?t=358030
first the official one....
and read- read - read

Jade T3232 no phone activation

Hello to all users of that great forum. I`m new here and need help
for a problem I haven`t seen discussed here.
Brought from UK a sim unlocked / orange HTC T3232 to Germany.
After flashing the rom with HTC_Touch_3G_GER_v2.32.407.2_Radio_v0.41.30.12 rom - the telephone option never work.
When I tried activation in Comm Manager - no sucess.
So I tried a tleast the Jade_WM65_German_Overloaded_OS_2.21806_NEW_OEM_2.33.721.1 rom.
without sucsess.
Have I made some mistakes? All other functions seemed to be in shape?
So please maybe someone could help me to fix the problem?
minuteman_x said:
Hello to all users of that great forum. I`m new here and need help
for a problem I haven`t seen discussed here.
Brought from UK a sim unlocked / orange HTC T3232 to Germany.
After flashing the rom with HTC_Touch_3G_GER_v2.32.407.2_Radio_v0.41.30.12 rom - the telephone option never work.
When I tried activation in Comm Manager - no sucess.
So I tried a tleast the Jade_WM65_German_Overloaded_OS_2.21806_NEW_OEM_2.33.721.1 rom.
without sucsess.
Have I made some mistakes? All other functions seemed to be in shape?
So please maybe someone could help me to fix the problem?
Click to expand...
Click to collapse
Whats your SPL version?.. for 2.32.** OEM your SPL should be 2.32.Olinex
Check ur SPL.. ( Switch off jade ; press volume down key and power key to go to bootloader )..
Read ... Read ... Search ... Search...
check-> http://forum.xda-developers.com/showthread.php?t=514406
ironeagle said:
Whats your SPL version?.. for 2.32.** OEM your SPL should be 2.32.Olinex
Check ur SPL.. ( Switch off jade ; press volume down key and power key to go to bootloader )..
Read ... Read ... Search ... Search...
check-> http://forum.xda-developers.com/showthread.php?t=514406
Click to expand...
Click to collapse
Thank you for response!
So I think I found the error:
HARD DSL:
JADE 110 64M
SPL-1.40.0liNex
MicroP-Jade(LED) v5
No I try to change the rom ( into a 1.4 Version)
After that it hope it will be possible to update to SPL 2.32 Olinex.
So that I can flash a german rom ( German overload?)
Is that way correct? Please help me. Thank you for your time.

Categories

Resources