Related
I just finishing upgarde radio rom of my dopod 838 with cingular radio rom
btw after finishing & restart the device, they can't going up to the windows mobile system, and still runnting at booting mode with cingular booting picture.
also i cant see the radio rom version at boot screen, did they lost?
then I ask to the servcie centre at my place, they say my dopod must be buy a new dopod mainboard $300 US. and chenge them
Did the service centre haven't hardware/software installer for repairing my dopod?
Well you will find that if you use a Radio that has not been made for you phone, it could do alot of damage. So you may find that the service centre is right!
If you used one of the Radio Only Roms then the splash screen would not have changed.
Download and flash one of the Roms for your exact Device & Carrier.
Then find the sticky post on Radio Only Roms and download and flash the one you want.
Problem solved.
kyphur said:
If you used one of the Radio Only Roms then the splash screen would not have changed.
Download and flash one of the Roms for your exact Device & Carrier.
Then find the sticky post on Radio Only Roms and download and flash the one you want.
Problem solved.
Click to expand...
Click to collapse
btw, where I can download a flash & rom?
can U give a tutorial for them?
sory if my english bad
cause I'm came from asia
thanks very much
Check the wiki for tutorials and info on where to find ROMs.
OK thank
I'll be try to my dopod
HELP !!! HELP !!!
**I'm doing wrong upgrade on dopod 838, I'm flashing the radio rom with cingular radio rom, but my device cant starting to system and still restaring with cingular raising the bar screen**
I just trying all the method on this thread but still error
and my friends say that the radio rom its locked by cingular rom so the cant be upgarde again...
My Dopod 838 still error
can anybody help me?
fadey said:
HELP !!! HELP !!!
**I'm doing wrong upgrade on dopod 838, I'm flashing the radio rom with cingular radio rom, but my device cant starting to system and still restaring with cingular raising the bar screen**
I just trying all the method on this thread but still error
and my friends say that the radio rom its locked by cingular rom so the cant be upgarde again...
My Dopod 838 still error
can anybody help me?
Click to expand...
Click to collapse
First, if you have a Cingular Splash Screen then you used the wrong Rom since you only wanted the Radio updated.
Here is the thread for the Radio Only Roms: http://forum.xda-developers.com/showthread.php?t=268031
Second, the problem is not that your device is locked but rather that the Cingular Rom reports version 2.25 which is higher than the two Dopod Roms (2.19 English & 2.23 Chinese).
What you need to do:
Download one of the Radio Only Roms (from the above link). Extract the contents to a folder on your PC.
Download the desired Dopod Rom Upgrade Utility from here: http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
Change the file extension to from .exe to .rar and then extract "nk.nbf" file to the folder from step 1 (overwrite the existing file).
Enter Bootloader Mode (Press Voicedial button + comms manager button + soft reset. You will get a screen with 3 colored bars).
Connect your phone to PC with USB Cable.
Run "ROMUpdateUtility_Wizard_NoID.exe"
Let us know if you get it fixed.
Yes
thanks All
my dopod can coming to the OS again after flash with dopod_838_1.7.13.102_CHS rom
but the screen when boot still cingular
but its no problem
thx 4 all
this is the best forum
Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
GSM system said:
Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
Click to expand...
Click to collapse
hi
Plz be specific from where did u download the official rom,which u said u tried to flash.was it from official i-mate club ftp site and what was the version of the rom u tried to install,cuz they don't have any upgraded version on this site apart from the last wm5 dated year 2006. i-mate is not offering any wm6 upgrade to any of its products.
secondly, which other rom u tried to flash afterwards?
as far as ur attached pics r,if u can reach to this screen than do not worry about the upgrade info,as it's sometime displayed and sometimes not,just hit the upgrade.
if it completes than it's alright,but if it stucks for a very long time and displays any error message.it means it has not upgraded.
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
GSM system said:
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
Click to expand...
Click to collapse
Goodluck,If it upgrades successfuly do let us know,
Btw, it's an ;ld wm5 Rom,why don't u upgrade to newer wm6 Roms ?
Brother ....the Same problem ...So what i don't you have another solution ..please
br
GSM system said:
Brother ....the Same problem ...So what i don't you have another solution ..please
br
Click to expand...
Click to collapse
ok,first plz post the exact details of ur k-jam,
1.IPL.....?
2.SPL....?
3.GSM...?
4.OS ver? ( Arabic or WWE)
secondly,tell what exactly happened and what error r u getting.
thirdly,what u want to upgrade to,I mean Arabic or English version of Rom ?
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
GSM system said:
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
Click to expand...
Click to collapse
ur phone's ipl/spl 2.16,it's a AKU 2 version,therefore check the rom with which ur trying to update shud also be aku2.the update rom shud be newer than the one already on ur phone.
So what i doing Now can you fined to me any solution plz ...
br
GSM system said:
So what i doing Now can you fined to me any solution plz ...
br
Click to expand...
Click to collapse
can you tell what exactly is the problem you are having at present is it that:-
1. you are not able to complete flash,it stops and give some error,if so then what error it shows ?
2.RUU starts to flash,but when it comes to the screen where it verifies the updating rom's info,there you don't see any info,as per your first post,than you discard the update?
3. is the version of the rom newer your are trying to update with then the one already on your device
plz verify these ?
Brother ... i am Sorry to bother you ..
1-about the flash my device is complet flash and the Computer tell me 100% congratulation .
2- the device don't accept factory Default
3- my device is freezing on splash screen. i-mate
many thanks ..
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
GSM system said:
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
Click to expand...
Click to collapse
Ok,lets try this way out,try to do a hard reset,to perform hard reset :-
1. Press and hold the Comm Manager button and Voice Command button on the device,than
2.While keeping the two buttons pressed with one hand, and at the same time,with other hand,use the stylus to lightly press and hold the soft reset button.
the device will reboot and restart again,see if it starts to work alright.If still freezes at the splash screen,than I'll suggest you do this,it really sometimes help and I have solved my problem so many times by doing this :-
Reboot your PC, run disk clean on Drive C:\,delete all the Temporary internet files,Temp files rather check mark all the options in the disk clean wizard option and hit ok,this will delete all the junk files from your PC,now delete all the cookies in the internet options,after doing all this,switch on your phone and go into Bootloader mode(tri color screen),when there than connect your phone to the pc using usb cable but don't active sync your phone,cancell active sync if need be,when you connect your phone with pc via usb,look at the screen of your phone you will see a little usb shown at the bottom of the screen.
Now open the rom which you downloaded and execute the Ruu..,it will start to flash,let it complete ,it will confirm flash and reboot,it start now and work normal, I hope,it will solve this problem remember don't do anything else with the pc like browsing the web or reading e-mails,playing games or working on Microsoft office,don't touch you pc and phone while the rom flashes.
Well,there is another way also,but as you want the official arabic version rom on your phone,do it first as i told you above,if it works,good,otherwise we will do the second method good luck
Amazed !
Hmmm, sry to say I observed you joined this forum on Dec,2006 and posted 57 times,just went through your posts and was amazed that you already have gone through this unlocking and upgrading on different devices,well you seem to have quite knowledge about all this,than how come you are stuck with this problem now ?
I hope your not just kidding me ? or your are really stuck up and seeking help ?
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
GSM system said:
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
Click to expand...
Click to collapse
ok, what is the present status of your phone ? what ipl/spl...? it shows in bootloader mode ?
as you posted in another thread that you tried to flash wizard_love_rom,but did not succeed,earlier you only wanted to upgrade to an official arabic i-mate k-jam rom.Now do you want to upgrade to any rom ? by unlocking the phone ? or just want your phone to work by any means ? if yes,then there's another option to get your phone working,I really hope so.Plz confirm what you want to do now ?
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
GSM system said:
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
Click to expand...
Click to collapse
ERROR [294] : INVALID VENDER ID
these error messages appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device.
Well, as I can think,you had an Arabic rom version OS 2.16.9.1 Arabic on your phone before and tried to flash a wwe version rom.the bootloaders verified and did not accept the rom.So a bad flash and splash screen got freezed,the only way is to flash and try to downgrade to IPL/SPL 1.xx and CID unlock the device and upgrade to another rom to start working, or flash the official stock Arabic rom to bring back the phone to it's default status,but the official rom you downloaded and tried to flash was of the same OS version didn't flash correctly and got splash screen stuck.Therefore,the only option left at present is to try and downgrade it to IPL/SPL 1.xx.The options are :-
1.Try to flash again button's rom 'CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe ' Which you already have with you,a couple of times more and see if it might work,
2.Otherwise download this rom from the link below and flash,hope it'll work :-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
If successful,good,but if still fails,
3.there's still another option to flash the rom with replaced 'Romupdateutility' in the rom,which I'll explain how to do it later,
first try the option 1 & 2,lets hope it works,good luck
brother Many Thanks ..
I will do that and tell you ...also please if you can explam me how to flash the rom with replaced 'Romupdateutility'.....
respactfully
My friend Zabardast_1
please look this is the info befor i Downgrading with this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
now my device in Bootloader
IPL 2.16
SPL 2.16 ..
okay .... now i starting to downgrading ...my Device with this ROM CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
please note this pic i attached to you ... then after downrading ...this is my device info in bootloader .
IPL 1.01
SPL 2.16
now after i downgrading no thing happend just the splash screen change also i acctached to you image to see that ...
2nd step i tryed to flash my Device with this ROM Wizard_Love_2.26.10.2_WWE_Novii_CF2 what happend ( Error 300) also i attach to you image
now i wait your help ..please
respactfully
Hi,
my Terra freeze at the O2 screen. nothing happend than.
I tried many Hard Resets but without any success.
I try to install the Touch-It Rom. and it comes an Error. than the terra restart and than i only see O2 screen .-)
I have a German Terra with origianl WM6.
And Another Question - Is Wing the HTC P4350 ?? what is wing ? and what ecaxtly is ment with "RUU"?
Can anybody help me? Or can anybody tell me what to do? I need a Mobile Phone.
Many Many Thanks
Oliver
(sorry for my english - im a german guy )
wing == http://wiki.xda-developers.com/index.php?pagename=HTC_Atlas
ruu == ROM Update Utility
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
haanebambel said:
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
Click to expand...
Click to collapse
There are RUU's for all Herald except the Terra, if I remember correctly.
And there is no chance to install another ROM?
the bootloader works fine -
there i see
IPL 4.11.0002
SPL 4.11.0000
USB connection posibble.
I tried a rom i found in web - but at 2% the programm tells me
error 294- vendor id.
:-(((((
What can i do that the phone is workin again?
Your phone is CID to the Terra's factory ROM. You have to get a Terra RUU from your manufacturer. But they won't like that if they find out you were trying to flash a third party ROM into their device.
sorry to say
but 1000000 times mentioned
there is NOOOOOOOO RUU for terra.
send it to service
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
sammy__s said:
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
Click to expand...
Click to collapse
but not AFTER he tried to flash a WingROM....
the very first had to be flashing HArd-SPL - but he didn´t
Sorry.
my hera 100 is in french and i need to use it in english,i ve search the forum i cant find one.pls i need a direct link to download this english rom.thanks in advance
You searched for Herald ROMs?
A quick search lead me to this:
http://rapidshare.com/files/23139691/RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
Your phone is still in the wrong language so you'll have to either USPL or HardSPL but BEFORE you do that, is your phone's SPL/IPL 4.0 or higher? (Check by holding the camera button down and pressing the soft reset button.) If not, DO NOT USE USPL or HardSPL. Use the Goldcard method. (Search for it.)
You searched for Herald ROMs?
A quick search lead me to this:
http://rapidshare.com/files/23139691/RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
Your phone is still in the wrong language so you'll have to either USPL or HardSPL but BEFORE you do that, is your phone's SPL/IPL 4.0 or higher? (Check by holding the camera button down and pressing the soft reset button.) If not, DO NOT USE USPL or HardSPL. Use the Goldcard method. (Search for it.)
error 294 invalid vendor id
i tried to flash the rom, this is the message i gets error 294 invalid vendor id.pls i need another rom with no vendor id,or if there is any thing i can do pls tell me
You'll have to USPL or HardSPL and remove the SPL from that ROM I gave you, in order for it to bypass the vendor ID. Make sure you have an SPL of 4.0 or higher before you try, either. Search the forum for more information about this.
uspl or hardspl
pls how do i uspl or hardspl pls throw more light on this
thanks sir
eseosa said:
pls how do i uspl or hardspl pls throw more light on this
thanks sir
Click to expand...
Click to collapse
Do not flash with either if your SPL/IPL is lower than 4.0.
As far as how to: A little search and I came to a post that I wrote a long time ago.
hardspl
pls how do i hardspl my herald so that i can write english rom on it
eseosa said:
pls how do i hardspl my herald so that i can write english rom on it
Click to expand...
Click to collapse
There are many walkthroughs on it. And remember to check your SPL.
Thanks for this sir......
Good work..
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer