Related
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Michalek said:
Hi; I tried to unlock my G3 wizard and now I think I am very stupid.
First, I get CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe and upgrade wizard, on wizard was IPL 1.xx SPL 2.xx, GSM also anything, but OS nothing. Blank line. Then that booted to bootloader.
So I tried RUU_Molski.Biz_226102_22610105_022511_WWE.exe, it wrote IPL 2.26, SPL 2.26 and OS nothing. Then i tried t-mobile rom, but it didn't work, because "only upgrade".
I tried through CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe, so now I have IPL 1.01, SPL 2.26, GSM something, OS nothing (blank line) and I think I'm stupid.
Any ideas? Thank you...
Click to expand...
Click to collapse
Make sure that you have unlocked the device correctly. Read Dr. P's sticky:A Definitive Guide to Unlocking G3 Wizards and also the wiki.
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Michalek said:
I know that i haven't unlocked my wizard The problem was before that I started unlock... OS disappeared after first flash.
Click to expand...
Click to collapse
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Now Unlock your device BEFORE flashng a 2.x Rom.
Dr P's Sticky Thread covers this, please read it throughly..
kyphur said:
Reflash with the Button 1.05 Rom, if the IPL & SPL don't match after the first flash then flash a second time with the same Rom, that should fix IPL/SPL problems.
Click to expand...
Click to collapse
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
kyphur said:
Now Unlock your device BEFORE flashng a 2.x Rom.
Click to expand...
Click to collapse
I can't unlock my device, because I haven't OS...
kyphur said:
Dr P's Sticky Thread covers this, please read it throughly..
Click to expand...
Click to collapse
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
When all else fails, flash an official Rom from your Service Provider. That should get you back to working order then proceed with the unlocking from there.
Michalek said:
I reflashed Button ROM for three times, I still have IPL 1.01 and SPL 2.26.
I can't unlock my device, because I haven't OS...
Hm, in point 7 - Connect your device and cancel the partnership. (You're a guest )
I can not connect my device, because I haven't OS on Wizard, he boots only to bootloader (with IPL 1.01 and SPL 2.26). I can flash from PC, but then I never have OS od MDA.
I read the "A Definitive Guide to Unlocking G3 Wizards" many times, but I dont's see any solution...
Maybe I have strange wizard
Click to expand...
Click to collapse
When I say "Connect your device" I mean to connect it to the USB cable. Two paragraphs after item 17 I address this issue. You don't need an OS, just be in the bootloader screen. I've personally had this exact same thing happen where all I had was the IPL and SPL with nothing else. Remove battery from PDA and then put it back in. Make sure you reboot your PC.
Good luck.
When all else fails, flash an official Rom from your Service Provider.
Click to expand...
Click to collapse
good idea, but it doesn't work; because "upgrade only" - My originally T-Mobile ROM is only 2.21, so I can't flash it
17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM This will give you a strong 2.26 IPL and SPL to work with.
Click to expand...
Click to collapse
Invalid Vender ID.
But I can flash MOLSKI ROM with 2.26 IPL/SPL. Should I?
==
For everyone: Thanks for your time, really. But I'm confused, I read all, nothing helped.
Let's say: "Michalek is very stupid, we'll write him "what to do" step by step" ) something like "You asshol, connect your mda in bootloader to pc via usb, then download this, run it, then ...".
Because manual doesn't work for me, probably.
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Michalek said:
New year, new way I tried to flash today - and - i see OS, I'm in OS, I'm going to unlock wizard based on Unlocking Tutorial ;-)
I don't know, why it was successful. I tried reboot yesterday for four times, but it not helped. Only today.
I'm the happiest man on the planet And, "I've seen PROBABLY every situation with a G3 device here." - it is TRUE
Thank you for your time.
Click to expand...
Click to collapse
Good to hear you are making progress, let us know how things turn out!
--M
-Michalek- Well that's wha we like to hear! The 1.05 works great as a disaster recovery tool. Most times when it doesn't work I tend to lean on the PC as the culprit. CHKDSK, temp files, spyware and virus's, etc.
Happy New Year, no?
Don't feel stupid
I'm glad it's working for you! Don't feel stupid though. My first attempt at loading a new rom went very similar. The CID unlock process told me it was successful (I thought) but it wasn't. I freaked out and thought all was lost. But I finally worked through it by going back to the Button ROM (LOVE THAT BEER SPLASH SCREEN) and starting over. The same problem even happened again about three weeks ago. After freaking out, I reloaded the Button ROM and was back on my way to normalcy
MDA is running on Superrom 1.1 and it works!
I don't know, what exactly was the problem with OS, but it helped me, when I left MDA cca three hours without battery. When I flashed the ROM before, OS wasn't.
At the last time, THANK ALL OF YOU VERY MUCH. And special thanks for Dr Puttingham and his unlocking tutorial. Thanks.
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
try this
Firware an old rom back on the device prefrebly the one you ohone came with and make sure you phone is cid unlocked. Also have you tried a hard reset
Force bootloader mode!
Check this out!
http://forum.xda-developers.com/showthread.php?t=294107
That worked for me and others!
Good luck!
ghailoo said:
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
Click to expand...
Click to collapse
A couple of things to start with. First of all get you device back working. As mentioned by epimazzo above, force your device into bootloader and flash a stock ROM not a cooked one. Read the thread.
Once you have got your device working start reading before making any more rash decisions about upgrading to WM6 (especially when the file name hints that it is for a Prophet and not a Wizard). There is only one leaked Crossbow ROM for a Wizard. This has been cooked a few times (Orwell, PDAViet, Underground). There are many threads on the merrits of each ROM but you need to read read read before you end up with a brick.
Fixed Boot crash problem
Thank you Guys for all the help; I got it back running.
formatted : Push the network button and the voice button and reset then release the rest and you get the balck screen that has the press send button and that formats Wizard and then
Push the Power + Voice + Camera and I get the Red Green and White screen. quickly Update the ROM to the origunal one I have T-Mobile. It worked. You guys are the best. I found 5._Underground_edition_Crossbow_ROM But I was not able to flash it. I need to unlock the CID but I read that I would have to down grade the Wizard and then Unlock the CID. I am still looking for the old ROM.i think I found it. If anybody has a better way to Unlock the CID please tell me.
Thank you a Million tiles for all the Help guys.
Hello all,
I am somewhat of a newby here, but I have successfully unlocked my Cingular 8125 and installed a couple of WM6 ROMs. I followed the procedure of downgrading to Button 1.05 ROM, then running Lociwiz, then installing T-Mobile 2.26, then WM6 ROM. Worked great...until now.
I was going to try another ROM, and I followed above procedures (didn't know if I needed to after initial unlocking, but I did anyway). At the "install T-Mobile 2.26" step, after 1 %, I got an error 326?, nb file not for this device. I can still install cooked WM6 ROMs, and the SPL changes, but IPL always remains at 1.01. If I try to install IPL/SPL 3.08 CAB, SPL changes to 3.08, IPL stays at 1.01. I have re-installed Button Rom 1.05 and run Lociwiz a dozen times to no effect. Even the Cingular WM5 OS meant for this device gives me the same error code as the T-Mobile.
I'm hoping this is a simple newby error. Anybody have any suggestions.
Thanks for any help.
By the way, after loading Button ROM, my Wizard hangs during the customization routine at Signed_DiscoButton8.sa. I must soft reset.
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
d-lite said:
I got exactly the same problem.
I am now on IPL 1.01 , SPL 3.08, radio 2.69, using rom NBD 8.3
doesnt seem a problem however...
Click to expand...
Click to collapse
Hey m8,
have you forgotten this thread (http://forum.xda-developers.com/showthread.php?t=319582) ? (see last post)
mestrini said:
hahaha nice to see good spirit after all this
Here goes:
Make backup of the CID block (VERY VERY important!!!)
Make backup of the GSM calibration block (VERY VERY important!!!)
Kill wcescomm.exe process
Start mtty, enter bootloader mode in Wizard and connect
type doctest (this will write test patterns in DOC chip and clear all data!)
Flash button ROM (1.01_IPL/1.01_SPL/1.05_OS)
Flash CID block backup (don't miss this)
Flash GSM calibration backup (important)
If all ok then remember to upgrade to 2.xx before installing WM6!!
Post results
EDIT:
Use WST for steps 1, 7 & 8
Click to expand...
Click to collapse
are you willing to prove me wrong?
mestrini said:
are you willing to prove me wrong?
Click to expand...
Click to collapse
yes.. missed your last post to be honest, sorry..
(btw phone is happy till now .. but we go for solving it, killing seems impossible)
step 2, gsm callibration block.. how do i copy?
D-Lite
use the "Read ROM" button and select the appropriate section from the list.
status:
Code:
DOC ImgFS partition read/write test PASS
Ext ROM partition read/write test, offset=0x0, length=0xA00000
Test pattern =0xAA
Flash Ext ROM failed.
DOC Ext ROM partition read/write test FAILED
--Flashing button rom @ 100%
--DATA CRASHES PLEASE CONTACT SERVICE CENTRE
--WST Says I am still on SPL 3.08 and rom is write protected.. screen of wizard says SPL 1.01 ...
--Installing Button ROM, ... SIM Lock SUDDENLY
--Screen goes funny flashing between simlock and customise
--Few soft-resets, WST now convinced on SPL 1.01 and flashed CID block
--Soft-reset
--Imei gone, flashed back GSM callib. data, softreset
--doesnt boot passed the pint of beer... going for RUU of T-Mobile 2.x
--bootloader, flashing RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe
--The NBF can not be used for your phone @95%, followed by congratiolations (stupid software)
--trying UK version...
--all give error 326
--another button flash
--*PLING IDEA* on 3.08 i couldnt doctest properly... so doing it again
-- bad idea.. same result...
damn... i thought it would work
anyway, there was point where the phone had same values for IPL/SPL (not too bad ). What is strange is why phone didn't boot anymore after flashing the GSM calibration and saying the flashes weren't suited for the phone.
What state is it on now? Wanna go again? This time, instead of flashing the 'GSM calibration data' do a simple IMEI writing and try to unlock CID before upgrading to official ROMs
sorry for this...
IPL locked on 2.26
I am having the same issue. I have tried numberous times to load my original rom and get the 326 error @ 1%. My ipl remains locked on 2.26. Is there any way to fix this? Please help.
it is now on 1.01, got my own imei back, spl 3.08, nbd 8.x rom...
everything fine again.. pretty sure it has something to do with ext.rom and/or write protection of it.. will give it another shot but not this month.. getting busy
@acmickey, not sure if you got same issue... is your IPL 1.01? else you might just have a locked phone..
Hey d-lite,
I followed your example and loaded BSD8.3 ROM and IPL/SPL 3.08 and radio 2.69. Everything seems to be fine. No missed calls. All programs work (touchflo is pretty cool). IPL is still locked on 1.01, even though SPL is 3.08.
I tend to agree with you that something is suspicious concerning the extended ROM. The first symptom I had that something was wrong was after loading Button's ROM, during the customization routine, Signed_DiscoButton8 would not install. Phone locked up and had to soft reset.
Oh, well, at least the phone works. The downside, of course, is that you can't load an original ROM, even though you can load a cooked one. Weird, huh?
Hopefully someone a lot more knowledgeable than I will figure this one out soon. Will keep checking the boards. At least we don't have bricks.
I am having the exact same problem as the 1st post but my ipl is stuck on 2.26. I am using an unlocked device and I have no problem downgrading/upgrading the spl. I also get the 326 error when I try to flash back to the original rom. (I used to be able to do this without a problem - I can't figure out what happened.)
It's really weird and I have search and searched and can't seem to figure out a solution.
which SPL you have now?
sorry.... my spl is 1.01
Right. Assuming your device is working 'normally' are you willing to try something new? If so contact me PM
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
d-lite said:
what have you cooked up this time mestrini? lol
my wiz (at 1.01 still..) is doing a-ok, but always willing to go for something new so we can fix this for the communities sake...
Click to expand...
Click to collapse
sorry to mislead you buddy but acmickey got it all wrong and, instead of IPL stuck at 2.26 and SPL 1.01, he has same as you IPL 'locked' at 1.01
So my theory could not be verified.
cheers
I'm holding Wizard as followings:
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
sivaram101 said:
I'm holding Wizard as followings:
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
Click to expand...
Click to collapse
hi
post IPL/SPL... ? of ur wizard in order to determine which wizard is it G3 or G4,cuz upgrading procedure is different for both.
T-Mobile MDA Compact III Issue
Sorry to tag this thread, couldnt figure out how to create a new one
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul
your in the wrong forum
try to flash in bootloader mode, and use your official rom first
zabardast_1 said:
hi
post IPL/SPL... ? of ur wizard in order to determine which wizard is it G3 or G4,cuz upgrading procedure is different for both.
Click to expand...
Click to collapse
I'm holding Wizard as followings:
IPL 1.08
SPL 1.08
GSM 1.09.10
OS 1.8.10.2
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
Hope mine is G3....
Yours is obviously a G3 because G4 don't run OS 1.xx...
Go READ the sticky http://forum.xda-developers.com/showthread.php?t=285435 that has a step-by-step guide for what you want
Don't start new threads without first trying all the options: Read, Search, Wiki, etc..
sivaram101 said:
I'm holding Wizard as followings:
IPL 1.08
SPL 1.08
GSM 1.09.10
OS 1.8.10.2
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
Hope mine is G3....
Click to expand...
Click to collapse
u got G3 device,to upgrade follow this procedure:-
1. Sim/Cid unlock ur PDA,for this look here for the method :-
http://forum.xda-developers.com/showthread.php?t=285435
2.Flash new wm6 Rom,to flash look in this link for the method:-
http://forum.xda-developers.com/showthread.php?t=298613
or, follow this link for all your answers:-
http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=-1&f=289
good luck
Thanks Guys.. Let me try the same.
Is my K-Jam totally bricked?
It is now stuck up in bootloader screen.
I am able to swtch it off with power button. I can also have first flash screen.
On connecting with USB port, it shows yellow light indicating that it is charging & that over a period of time, goes green.
Earlier I had flashed TNT ROM but while reflashing newer it got stuck up as after flashing, I tried to hard reset [mistakenly thought ROM is flushed fully] & could not go further after initail first screen.
Other details:
IPL:2.16
SPL:2.16
GSM:02.07.10
O.S.:11.0.0.2
May some one help?
Thanks in advance.
Virat
Nopes ! its not 'Bricked' just had a bad flash. As long as it gets into bootloaders ,its perfectly safe. Perhaps,your phone is not CID unlocked ?
Download the official carrier's rom from its website and flash it in the bootloaders,it'll start to work fine.Then read the guide to cid unlock and upgrade.
Cheers!
boot issues
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
ghumanfly said:
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
Click to expand...
Click to collapse
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Thanks but solution found while reflashing in XP
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
virat said:
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
Click to expand...
Click to collapse
Thanks !
Glade you got it working
Have a nice day !
zabardast_1 said:
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Click to expand...
Click to collapse
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
ghumanfly said:
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
Click to expand...
Click to collapse
'Hard Reset' the phone,hope it'll work fine.
Well,I assume,you cudn't do the SoftSPL correctly the first time,try to apply the SpftSPL again correctly,if it works,ok,otherwise you can upgrade to wm6 with HardSPL method.
ba salam khedmate aghaye zebardast
duste aziz man ppc imate kjam daram ke eshtebahan soft spl kardam va rom wm6 prophet rush rikhtam ba tavajoh be inke seri gushi man g4 wizard bashe (ipl&spl 2.16.0001) kholase gushi alan tu safeye avali ke windows ba yek logo az rom marbuteh miad bala gir mikoneh .albateh 2 ta rom kjam asli wm5 ham gir avordam rikhtam vali hamunjuriye albateh jaye shokresh baghiye ke gushi tu halat bootloader gharar migireh va hard reset ham mishe. lotfan be man komak konid ta moshkelam ro hal konam. ba tashakor az shoma
could you please ,solve my problem kjam g4 wizard
laike salam brother
thank you very much for direction. I want to answer your question:
Quote:1. Which was the original official rom running on the phone before you tried to upgrade ?
1- I think wm5 belonge to 2005 becose it is written under the battrey.
Quote:2. What was the original wm5 rom and IPL/SPL of the phone before ?
2- I couldent remember but this phone approved by uaelab company [TA-2005/453 approved][E05/14/40225/g]and I flash with different official rom which you mentioned at ftp://ftp.clubimate.com but nothing happend ,maybe I do somthing wrong.
Quote:3.What exactly you mean you copied jumpspl to the root of the phone,did you applied SoftSPL ?
3- yes correct I did softspl with whit coulor screen then connected to pc and did toast that .
also I have problem to connect wst 4.2.2 to my ppc.
I download it and run, but the software couldent detect my fhone I dont know why .I connet it from bootloader 3coulor but nothing happen and so on.
could you please to explain how can I work with wst 4.2.2 also very important how to connect that because it says I have to connection with activesync .
pls direct me pls
mamnun
kourosh