Hi,
My cradle is broken .I want to activesync with bluetooth.when I do it,the desktop does not recognise my xdaiis.i did enable the blutooth on and ran the bluesoli software on my desktop with the blutooth dongle plugged into the usb.what might be the problem? blutooth file transfer works fine,and private network also works,but my blutooth headphone motorola h-500 just gives out static when i want to make a call.can any one help me plz?
ROM-1.31.00 WWE
ROM ver-1.02.00
could it be the bluetooth version on the pda?????????
You need to configure ActiveSync to use one of BlueSoleil's COM ports.
configure activesync
How do I do that? can you give a step by step turorial? would appreciate your help.
thanks
rgds
mukund
India
figured out the way........
First enable the blutooth on the BA.start the bluesolei software on the desktop/laptop and let it discover the BS.now start tehe active sync on blutooth from the BA,making sure that the COM ports are the same on the BA and the desktop,bango blutooth activesync is connected!!!!
thanks guys
mukund
Am setting up my Tytn II with a new Toshiba Satellite Pro U300 laptop. I have no problem with syncing via USB but cannot get Windows Mobile Device Center to see the device via Bluetooth.
Half the problem may be the Toshiba Bluetooth software, which takes over the standard MS bluetooth software, although I managed to use the Tytn to share an internet connection without much fuss.
On the handset, when I pair it with the PC it sets up a COM port (COM9) and Wireless Stereo support - should it have another option under Partnership settings or something?
On the PC it sets up a dial up networking connection and a Network Access (PAN) connction, both of which seem to work fine. I can browse the Bluetooth shared folder on the phone or PC without problem, so what am I missing with regards to syncing???
Any ideas would be appreciated, but please document it clearly as I am sure I am missing something obvious.
Thanks in advance
Martin B
Try this, step by step, it worked for me perfectly!
http://forum.xda-developers.com/showthread.php?t=340954
Hi there,
I got a car-pc since a while and have been using my sony ericsson with it... calls get transferred via bluetooth to the computer, as like phonebook in integrated into the car-pc software... all transmitted via bluetooth...
Now with the diamond, how do i set it up as a phone? winXP doesnt recognize other services than the moden funxtion
you should enable Remote SIM access on you Diamond: Start -settings - connections bluetooth SIM acces and also activate the service for your BT connection (do this in the first tab of the BT settings dialogue after connectig)
already done :-( But the Computer doesn't list other functions than modem for the HTC
Do i need any drivers for XP? Usually not...
Using Diamond & CarPC Via Internet sharing over BT
I have a CarPC in my car, it has a 7" touch screen & it is running WinXP and have built in Bluetooth. So for surfing in the internet , MSN, Skype in my car over the carpc i am using my HTC Diamond with the Internet Sharing icon and connecting it via Bluetooth to the carPC so i get FAST Internet over Bluetooth between my carpc and my HTC Diamond.
It works very good - very stable.
Matter of fact it is "capturing" my 3G Internet and pass it over Bluetooth to the carpc.
Solution works very well.
k, but i am not interested in using it as internet connection, i want to phone via the computers hardware, so the car-pc should act as an headset... besides that, he shoult be able to access the adress book and to begin calls... that for, i neeed 2 comports emulated, but how to create them?
could it be because the device is seen as a PDA, and not as a mobile phone?
I know somewhere here on XDA there is a reg hack for earlier devices to make them appear as a mobile phone to car kits. maybe the same thing will help here. I don't know where it is, can only suggest searching, unless anyone else can point you in the right direction....
I used to have PhoneConnector on my CarPC, with PhocoAdapter on the phone. It worked, but now this software is not supported anymore and unfortunately it does not work with WM6.
Freefone is not compatible either.
My good Blackbaron, I believe we users of CarPCs and Windows Mobile are scr...d!
By the way, sharing the 3G connection workds a treat, by USB, BT, Wifi... I just wish Vodafone would allow other ports than port 80
I still didnt realize what 3G is... ^^ I never owned a ppc before...
Well, on the CarPC the internet speed is as great as a DSL line, here is France I measured it at more than 3.5 MB/s (KS20 is limited to 4 MB/s with HSDPA, who knows why). Coming from the crappy Edge Motorola phone I had before, the browsing is truly amazingly fast!
help
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Try this app called JetWare
gerardo66 said:
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Click to expand...
Click to collapse
1) Launch the Internet Sharing application on your phone (all WM6 phones have it)
2) Select your 3G connection, and BT or USB, tap "Connect"
3) USB: have ActiveSync installed on the PC, connect the USB cable, it's done.
4) BT: you have to set up a BT PAN hosted from your phone, add your PC to it, it's done.
5) If your provider uses a proxy, setup Firefox to use it (Tools/Options/Advanced/Network)
6) If your provider has a filter on User Agent, then you need the plug-in "User Agent Switcher", to put the same User Agent string as on your phone.
There you go!
zmob123 said:
Try this app called JetWare
Click to expand...
Click to collapse
Looks interesting, I'll give it a try when I have some time. Do they have a trial version?
Yes they have, i leeched it... But i don't find the difference between now and before installing it...
Hi all,
is there a software that allows me to use my tytns mic and speeker for my pc.
My idea ist to use x-lite on the pc, connect my phone by usb and use them as tcp / ip phone.
The problem is that 1&1 my german sip provider does not work with the nativ e
Kind Regards
Seppl
I'm using BT REMOTE (http://bluetooth-remote-control.en.softonic.com/windowsmobile).
I guess I need to use COM PORTS? When I try to make an "outbound" COM port it says there are no devices.
I can connect my S730 with my PC for activesync easily. But this BT REMOTE is not working... I REALLY NEED IT.
Please help!
ah works now.
just deleted the connection and paired again. and have no clue why it works now...............