I'm using BT REMOTE (http://bluetooth-remote-control.en.softonic.com/windowsmobile).
I guess I need to use COM PORTS? When I try to make an "outbound" COM port it says there are no devices.
I can connect my S730 with my PC for activesync easily. But this BT REMOTE is not working... I REALLY NEED IT.
Please help!
ah works now.
just deleted the connection and paired again. and have no clue why it works now...............
Related
Hi,
My cradle is broken .I want to activesync with bluetooth.when I do it,the desktop does not recognise my xdaiis.i did enable the blutooth on and ran the bluesoli software on my desktop with the blutooth dongle plugged into the usb.what might be the problem? blutooth file transfer works fine,and private network also works,but my blutooth headphone motorola h-500 just gives out static when i want to make a call.can any one help me plz?
ROM-1.31.00 WWE
ROM ver-1.02.00
could it be the bluetooth version on the pda?????????
You need to configure ActiveSync to use one of BlueSoleil's COM ports.
configure activesync
How do I do that? can you give a step by step turorial? would appreciate your help.
thanks
rgds
mukund
India
figured out the way........
First enable the blutooth on the BA.start the bluesolei software on the desktop/laptop and let it discover the BS.now start tehe active sync on blutooth from the BA,making sure that the COM ports are the same on the BA and the desktop,bango blutooth activesync is connected!!!!
thanks guys
mukund
Am setting up my Tytn II with a new Toshiba Satellite Pro U300 laptop. I have no problem with syncing via USB but cannot get Windows Mobile Device Center to see the device via Bluetooth.
Half the problem may be the Toshiba Bluetooth software, which takes over the standard MS bluetooth software, although I managed to use the Tytn to share an internet connection without much fuss.
On the handset, when I pair it with the PC it sets up a COM port (COM9) and Wireless Stereo support - should it have another option under Partnership settings or something?
On the PC it sets up a dial up networking connection and a Network Access (PAN) connction, both of which seem to work fine. I can browse the Bluetooth shared folder on the phone or PC without problem, so what am I missing with regards to syncing???
Any ideas would be appreciated, but please document it clearly as I am sure I am missing something obvious.
Thanks in advance
Martin B
Try this, step by step, it worked for me perfectly!
http://forum.xda-developers.com/showthread.php?t=340954
Thus far, I've been unable to use my AT&T Tilt as a wireless modem for my Vista laptop. I've partnered them in the MS Bluetooth Stack, then gone to Windows --> Internet sharing and set it to bluetooth pan and media net, then on my computer, gone to "connect to" and opened the bluetooth pan connection. Unfortunately, at this point, my phone doesn't show up as a devic for bluetooth pan. If anyone can offer up some advice, I'd really appreciate it. Thanks
I would also like to add that Bluetooth PAN also doesn't work for me in XP (SP2). It doesn't show up in the the Bluetooth Device Wizard (the one used to add devices with PAN services), but clearly broadcasting is enabled in the options.
Also, just as a side note, I can't get USB tethering to work either...I'd really appreciate any help I can get with this tethering problem. Thanks.
Got it working. I have no idea why, but for some reason when i tried repairing it for the sixth time or so, vista suddenly decided it had drivers to install for my tilt, and it went ahead and installed the modem driver. now everything seems to be working.
By Bluetooth or USB? Or did you get both working?
Why bother with Bluetooth or USB headaches?? Just use WMWiFiRouter and connect to your phone over Wifi.
I am trying to share internet from my Tilt to my laptop via bluetooth. I have searched the forums and google for days now and can not get it to work. I have the phone and computer paired and I am using a Jabra A320 BT adapter with the latest drivers from Jabras website with Duttys ROM. The DUN service is recognized on both the laptop and the Tilt, but when I try to start DUN on the laptop, I get a message that says "error 678: the remote computer did not respond. For further assistance..." I appreciate any help or a point in the right direction. I am new to DUN and bluetooth, but not 100% computer dumb. My Tilt as a USB Modem works fine, but can't get the BT to work. I just am inexperienced at BT, and on another note, is it possible to ActiveSync my Tilt via BT?
I have still been unable to get this to work? Can some one please point me in the right direction to get this going? I have everything paired have tried multiple solutions including uninstall/re-install... I can't get it to work and it is frustrating the hell out of me!
I like to sync my Diamond with my Vista-computer and " Center for Windows Mobile devices" through Bluetooth.
I have a working connection with USB already, but want to skip the cable.
I can pair the computer with my Diamond but the only services I get on the Diamond is "wireless stereo" and "serial port".
Been trying to read every instruction on both the bluetooth connection in Vista and on the Diamond but it seems I cant get the service-choice I need to be able to sync my outlook and so on.
Any suggestions on how to get my bluetooth connection working?
Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html
studz said:
Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html
Click to expand...
Click to collapse
Thanks for the link but when I get to page 11 step 16 in the pdf it says you should get wireless stereo and Active sync. I get wireless stereo and serial port as my choices.
Don´t know if that´s because I use Vista and Center for Windows Mobile Devices (The new version that has replaced Active sync in Vista and that should make it soooooo easy to connect mobile devices instead of Active Sync.
I'm guessing you're using the default Microsoft Bluetooth stack with Vista? If so, ActiveSync should be available when you pair your phone with your PC. If not, check the Services tab for the phone in Vista's BT manager applet, it may need to be ticked in there.
I use BlueTooth with WMDC all the time with my Diamond and it was as simple as pairing then going into ActiveSync on the phone and selecting Connect via Bluetooth.
I´m not sure what bluetooth stack I´m using. I think it´s Toshibas but how can I check that?
I had to install Toshibas application to get the drivers for my bluetooth device and I think a got the stack at the same time.
Is there a way to shift stack if I use Toshibas instead of Vistas default?
Please take a look at the attachement to see my gui for bluetooth, and the Center for MobileDevices (Instead of Active sync) on my Vista machine, and what happens when I connect my Diamond through Bluetooth. Sorry about the language but it tries to install the Diamond as a Bluetooth modem and that´s the only thing I seems to be able to install.