Radio problem in only one location? - Tilt, TyTN II, MDA Vario III General

Talked my friend into the Tilt. Didn't want to take responsibility for ROM flashing his unit, so left him with the bloat-free standard AT&T ROM with a number of installed cabs (also standard AT&T radio). Phone works literally everywhere, EXCEPT for the city in which he lives (Gainesville, Florida - 3G area). Even works on the highway just outside the city, but no luck when he's in the city. Familiar with all the standard radio problems, but not working in a single confined area is new to me. Sound to me like it could be fixed with a new radio. Could it be something other than that? I have used my unit while visiting Gainesville with no problems (I even get HSDPA in places), both pre and post flashing new ROMs/radios. He's within 30 days and I'd hate for him to have a hardware problem and me think it's just a radio issue. Searched for a while and not seen anything like this. Thanks in advance.

Guilf said:
Talked my friend into the Tilt. Didn't want to take responsibility for ROM flashing his unit, so left him with the bloat-free standard AT&T ROM with a number of installed cabs (also standard AT&T radio). Phone works literally everywhere, EXCEPT for the city in which he lives (Gainesville, Florida - 3G area). Even works on the highway just outside the city, but no luck when he's in the city. Familiar with all the standard radio problems, but not working in a single confined area is new to me. Sound to me like it could be fixed with a new radio. Could it be something other than that? I have used my unit while visiting Gainesville with no problems (I even get HSDPA in places), both pre and post flashing new ROMs/radios. He's within 30 days and I'd hate for him to have a hardware problem and me think it's just a radio issue. Searched for a while and not seen anything like this. Thanks in advance.
Click to expand...
Click to collapse
That's really weird. If he's in within 30 days then I would just exchange it instead of flashing it with another radio.

Related

Problem with my TILT, signal....

Hi, my phone have like 4 month, and since 1 month or so, it is starting to loose the signal, every now and then I check the phone and it is with out signal (like putting it on AIRPLANE MODE) and it just only come back, if I switch to Airplane mode and back to normal mode, or if I restart it.
Any IDEAS??!?!
egk-69 said:
Hi, my phone have like 4 month, and since 1 month or so, it is starting to loose the signal, every now and then I check the phone and it is with out signal (like putting it on AIRPLANE MODE) and it just only come back, if I switch to Airplane mode and back to normal mode, or if I restart it.
Any IDEAS??!?!
Click to expand...
Click to collapse
Please provide us with your rom, radio, and what country you use your device.
To find your rom and radio:
Start>settings>system>device information>version
That happened to me until i switched to duttys rom and inex radio. now that problem is solved for me.
SOMEONE SET UP US TEH ROM!!!
WE NO GET SIGNAL!
If you could tell us if you ahve flashed to a customer ROM or if you have a Stock ROM, the one that came with the phone. Same with the Radio. We could help you better. Thank You.
redbandana said:
Please provide us with your rom, radio, and what country you use your device.
To find your rom and radio:
Start>settings>system>device information>version
Click to expand...
Click to collapse
ok its a AT&T TILT
ROM Version: 1.57.502.2
ROM DATE: 08/25/07
Radio Version: 1.27.12.11
Protocol Version: 22.45.88.07H
Same here
I'm now with the updated AT&T ROM, but wit hthe same issues.
This also happened with the previous ROM.
At home I'm connected to my PC via USB. For some reason, in this location I have virtually no reception (ie I have 1 or 0 bars).
And many times, if I don't go in/out of Flight Mode after I leave home, I find myself without reception even for a couple of hours (ie the Tilt doesn't "recover" on its own).
I HardSPL'd my Tilt and tried installing the French radio in order to improve reception (other users in my location said it worked well for them), but found it was incompatible, and after a very stressful day (I was certain I'd bricked my Tilt) - was able to enter bootloader mode and restore the original radio.
At the moment I don't want to flash a Kaiser radio, and I want to wait until AT&T release their own WM6.1 ROM (I don't want to use a cooked one).
Further (I wrote about this in another post) - my GPS loses signal quite often, even under clear skies. I understand that this is another aspect of the radio drivers.
I'd appreciate any suggestions.
Thank you.
I'd rather think it's a hardware problem. RMA...
Difficult....
I live abroad, and so it'll cost a small fortune in shipping charges, etc.
Not to mention import taxes, etc, if the IMEI is changed (eg if the device is replaced).
I live in a very poor reception area just outside of Boston. Previous to purchasing my device I would only have service about 40% of the time when I was at home.
When i purchased the Kaiser reception didn't get much better so I decided to search google and it led me to this forum. After reading many threads and asking some questions I feel that that the best radio that I've used so far is NIKI - 1.58.16.27. Now I have reception 95% of the time and GPS picks up about 7-10 satelites from my basement, crazy i know.
I'm not sure how much you been reading OP but I recommend you either learn how to flash roms and radios, or you can bring your phone to AT&T and have them look at it. However that means you have to give up your tilt while its being repaired, which sucks.
is this NIKI radio compatible with the standard AT&T ROM?
I have 1.62.502.0 and radio 1.27.14.09.
Or is it compatible only with WM6.1?
Thank you.
redbandana said:
I live in a very poor reception area just outside of Boston. Previous to purchasing my device I would only have service about 40% of the time when I was at home.
When i purchased the Kaiser reception didn't get much better so I decided to search google and it led me to this forum. After reading many threads and asking some questions I feel that that the best radio that I've used so far is NIKI - 1.58.16.27. Now I have reception 95% of the time and GPS picks up about 7-10 satelites from my basement, crazy i know.
I'm not sure how much you been reading OP but I recommend you either learn how to flash roms and radios, or you can bring your phone to AT&T and have them look at it. However that means you have to give up your tilt while its being repaired, which sucks.
Click to expand...
Click to collapse
ok, you say it improves with niki radio!?
so I have never done this before, is it hard!? were can I find a GOOD tutorial or guide or troubleshooter in case i get STUCK??
Other thing, here were I live, i think ATT from the quad band, use 850 almost all the time, anything to say about that? it doenst matter?, maybe its a stupid Q...
But the Niki radio requires WM6.1, doesn't it?
redbandana,
Did you install the Niki radio on a WM6 Tilt?
And what ROM do you have? (ie the original AT&T ROM, the updated AT&T ROM or a cooked one?)

Full HSPA reverts to GPRS every time I make a call

Please help me out with this, I'm getting very annoyed, upset and whatever else you can think of. Two days ago, I brought my Tilt into the ATT service center because of a problem, and they replaced it with a brand new Tilt. My older one was running 6.0 but this new one is running 6.1 WinMo, which I fear is the culprit here.
I get full HSPA bars here in NYC (kaiser tweak) under most circumstances, and it stays this way while I'm surfing the net and such but, whenever I make a phone call, it automatically switches to G ! ? There are times when it might go through with EDGE *the call*, but it's seldom. I never had this problem before the phone switch. It also happens without using Kaiser Tweak, with 3G. And while I AM able to use the phone with G, I feel that this might pose a problem at some point, and would like the phone to be able to reach its full potential or.. just be the way it was.
Help is seriously needed !
Doug
dougrb said:
Please help me out with this, I'm getting very annoyed, upset and whatever else you can think of. Two days ago, I brought my Tilt into the ATT service center because of a problem, and they replaced it with a brand new Tilt. My older one was running 6.0 but this new one is running 6.1 WinMo, which I fear is the culprit here.
I get full HSPA bars here in NYC (kaiser tweak) under most circumstances, and it stays this way while I'm surfing the net and such but, whenever I make a phone call, it automatically switches to G ! ? There are times when it might go through with EDGE *the call*, but it's seldom. I never had this problem before the phone switch. It also happens without using Kaiser Tweak, with 3G. And while I AM able to use the phone with G, I feel that this might pose a problem at some point, and would like the phone to be able to reach its full potential or.. just be the way it was.
Help is seriously needed !
Doug
Click to expand...
Click to collapse
i think theyre still using EDGE / 2G for voice calls.. not all markets have switched to 3G/HSDPA voice
I too have the same issue. I'm not saying a problem, cause in my opinion it is not. When a call is made it switches back to gprs. It takes about 30 secs after the call to switch it back to hsdpa. It is probably a bug or perhaps a lack of your carrier.
BTW. I'm with T-mobile Holland, perhaps it is network related.
What I'm trying to convey though is that my other phone (which was exchanged because I thought the top of the slider was loose) did not behave like this. It kept its full H bars through every call. And the only difference between the two phones is that the previous one ran WinMo 6.0 and this one runs 6.1
They DO use HSPA here in NYC, you have to turn it on with Kaiser tweak in order to use it, though.
Doug
u nailed it 2 times on the head here..
kaiser tweak..and ur stock winmo 6.1
- kaiser tweak is an essential tool for a kaiser..never leave it behind after a flash and always enable ur HSDPA
- winmo 6.1 is a dirty dirty devil, what i suggest is to reflash and use a good radio..i live in Central New Jersey and im in and out of NY daily ( midtown / diamond district ) and i have yet to experience a dropped call!
im running the below mentioned rom and radio..give it a go..most likely u wont be disappointed!
Jstar
JstarLuvsTina said:
u nailed it 2 times on the head here..
kaiser tweak..and ur stock winmo 6.1
- kaiser tweak is an essential tool for a kaiser..never leave it behind after a flash and always enable ur HSDPA
- winmo 6.1 is a dirty dirty devil, what i suggest is to reflash and use a good radio..i live in Central New Jersey and im in and out of NY daily ( midtown / diamond district ) and i have yet to experience a dropped call!
im running the below mentioned rom and radio..give it a go..most likely u wont be disappointed!
Jstar
Click to expand...
Click to collapse
Well, it's interesting. Paulbates over at hofo suggests (and I agree w/him) that it would have been silly for them to release a ROM which did this, and we'd see tons of threads here and elsewhere about it if it were the case. I only asserted though, that the radio version might not like the area in which I live yada yada..
As soon as the problem started however, I did install Kaiser Tweak, and enabled HSDA. It worked as usual, but the H disappears just as fast as 3G was disappearing, so it makes no difference. I'm also experiencing data connectivity issues on this phone for the first time ever. Last night, even with full E or H bars, as I tried to open Opera or PIE, I'd get an error saying I had no data session open and the web page wasn't available. I tried many different pages of course, so it was the phone.. This never happened with my other phone, and I'm really regretting having taken it back now.
P.S. as far as changing the ROM and radio, I'm very inexperienced (re: have never done it before) and will wait to see if changing the phone makes a difference first. I only wish they had given me an exchange phone with 6.0 on it. Even the guy at the shop said that a lot of people have been complaining about 6.1. Do you live in NYC btw ? If so, perhaps I will take your advice about changing the ROM/Radio myself. Only thing is though, I run Linux. I do also have a Macbook Pro.. Can I do it with either of those OS's ?
Doug
Oh this is so very annoying... I just brought the phone into the store and they replaced it again. The girl I dealt with was very nice, and went through testing it out, and agreed that it was indeed doing something it shouldn't be doing. She even swapped the SIM card, but it was still the same. I then got a new (refurb of course) and it seemed to stay on E in the store, but then I wandered outside into Bryant Park (where I am now) and the same ol' junk occurred.
The last call I made actually stayed on Edge, but that was about 1 of 7 calls. Not only that, but now my voice mail doesn't work either... It asks if I have an account, then prompts me to put in my phone number. When I do, it says it's not a valid account. I'm really regretting switching my phone over, big time.
I'm going to call CS and see what they have to say (yes, we know the network isn't solid right now, but we're "working on it") Yah...
This really puts me off, but if they can't do anything, I'll start messing with the ROMS. It's just that my download speed right now sucks, too. Can someone direct me to a mobile internet speed test, which is good ? I tried toast.net, but it's too slow to load anything on any of the servers. And speedtest.net requires flash, but those probably aren't very good for mobile phones, anyway.
Doug

[Q] The Rogers Diamond

I am about to buy a Rogers Diamond. Having owned 2 different Windows Mobile phones from them, I know they probably managed to limit the heck out of their Diamond so I was wondering if anyone that has a Rogers Diamond could tell me (us?) if they decided to limit software installation, GPS, internet etc etc.
If so, is there a fix?
If there's no english one I'll get the french one. Any flashing to standard english ROM possible right now?
Thanks in advance, can't wait!
-Nick
PS: Gecko is coming soon, hopefully before Christmas!
well i got mine today, few board members got it as welll before me.
I haven't played too much with the phone yet, but up to now they dont seem like they played too much with it...
if you want to know:
ROM Version: 1.93.631.8 WWE
Radio Version: 1.00.25.06
ram: 192mb
flash size: 256mb
you can flash to anything you want as long as you HARD-SPL your phone, causing it to SuperCID.
You don't really have to worry about backing up your rom because you can find it here, a board member already got it for us to play around with.
D0MZE said:
well i got mine today, few board members got it as welll before me.
I haven't played too much with the phone yet, but up to now they dont seem like they played too much with it...
if you want to know:
ROM Version: 1.93.631.8 WWE
Radio Version: 1.00.25.06
ram: 192mb
flash size: 256mb
you can flash to anything you want as long as you HARD-SPL your phone, causing it to SuperCID.
You don't really have to worry about backing up your rom because you can find it here, a board member already got it for us to play around with.
Click to expand...
Click to collapse
havent seen that version of the radio before?
No. Memory. Card.
What the heck? I had a 4GB one anyway, but it makes testing apps and transferring music so fast!
Rogers Diamond
I got my Rogers branded HTC Diamond yesterday and so far it'll let me install any apps I want. Internet works through wifi and 3G. I can't find a way to turn off 3G connection. GPS works but acquiring sat lock takes like 5mins compared to my old EU/Asia Diamond which locks to sat in 30sec.
ROGERS 3G
Just want to share this. But I'm pretty sure this has been tackled in the forums already.
Rogers branded HTC Diamond doesn't have the option to turn of 3G through band selection. I found this registry hack to enable band selection and now I can turn 3G off.
Rogers default registry - OFF
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:0
Registry tweak to enable band changes
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:1
Now you can go to >start>settings>phone>band tab and change band settings to your choice. I switched mine to just use GSM instead of auto which always connects on 3G.
mugglesquop said:
havent seen that version of the radio before?
Click to expand...
Click to collapse
really? that's what it says here, i just double checked cause you made me wonder i did a mistake
radio version
same radio version here.
ROM Version: 1.93.631.8 WWE
ROM Date: 10/30/08
Radio Version: 1.00.25.06
Protocol version: 52.31.25.13H
DIAM110 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
I'm having issue with gps sat lock taking so long and I suspect this radio version is the culprit. I might unlock and flash the radio on my phone. I've been reading this forum religiously for past 6 days now trying to understand how to unlock and flash my phone. The more I read the more I get confused.
I have the same radio but am not having any problem acquiring satellite lock. By the way, this radio is already posted in the radio thread at the top of the Rom Development forum.. so I don't know why someone said it was not seen before.
I hope someone can find or make a backup for the first splash screen (Rogers red, VGA). We have backups for the OS, SPL, and radio so far.
Hi, why do you want to disable 3G? I thought it was a benefit?
raidendb said:
Just want to share this. But I'm pretty sure this has been tackled in the forums already.
Rogers branded HTC Diamond doesn't have the option to turn of 3G through band selection. I found this registry hack to enable band selection and now I can turn 3G off.
Rogers default registry - OFF
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:0
Registry tweak to enable band changes
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:1
Now you can go to >start>settings>phone>band tab and change band settings to your choice. I switched mine to just use GSM instead of auto which always connects on 3G.
Click to expand...
Click to collapse
dsixda said:
Hi, why do you want to disable 3G? I thought it was a benefit?
Click to expand...
Click to collapse
I know. It's just that sometimes I would select something which needs internet connection (ex; quickgps) accidentally and it will try to connect through 3G. My friend got billed by Rogers a hefty $3000++ for internet connection which he never used because he thinks he accidentally run internet in his phone and unknowingly left it. I like the option of enabling 3G only when I need it. Plus I read from this forum that 3G connection is one of the battery killers of Diamond.
dsixda said:
I have the same radio but am not having any problem acquiring satellite lock. By the way, this radio is already posted in the radio thread at the top of the Rom Development forum.. so I don't know why someone said it was not seen before.
I hope someone can find or make a backup for the first splash screen (Rogers red, VGA). We have backups for the OS, SPL, and radio so far.
Click to expand...
Click to collapse
I'm using iGO8 and on my now sold EU/Asia Diamond it worked pretty well. Now with the Rogers branded HTC Diamond it takes like somewhere from 3-5 mins to lock to a sat. It sees the satellites but just wouldn't lock to them. My old diam got 1.00.25.05 radio in it and I'm thinking of flashing my phone with the same radio but keeping the Rogers ROM since there not that bad and as quick and stable as some cooked ROMs out there.
raidendb said:
I'm using iGO8 and on my now sold EU/Asia Diamond it worked pretty well. Now with the Rogers branded HTC Diamond it takes like somewhere from 3-5 mins to lock to a sat. It sees the satellites but just wouldn't lock to them. My old diam got 1.00.25.05 radio in it and I'm thinking of flashing my phone with the same radio but keeping the Rogers ROM since there not that bad and as quick and stable as some cooked ROMs out there.
Click to expand...
Click to collapse
The Rogers one is 1.00.25.06.. wouldn't that be better, if not almost the same (version number)?
I'll go driving tonight to test mine
raidendb said:
I know. It's just that sometimes I would select something which needs internet connection (ex; quickgps) accidentally and it will try to connect through 3G. My friend got billed by Rogers a hefty $3000++ for internet connection which he never used because he thinks he accidentally run internet in his phone and unknowingly left it. I like the option of enabling 3G only when I need it. Plus I read from this forum that 3G connection is one of the battery killers of Diamond.
Click to expand...
Click to collapse
$3000?? But I thought they max out the data plan at $100 if you go over. I'm on my first month so I haven't seen my first bill yet, but apparently I have used up a lot of voice call minutes even though I hardly used the phone to call!!! I leave my data on all the time so that I can check email every half hour.
dsixda said:
$3000?? But I thought they max out the data plan at $100 if you go over. I'm on my first month so I haven't seen my first bill yet, but apparently I have used up a lot of voice call minutes even though I hardly used the phone to call!!! I leave my data on all the time so that I can check email every half hour.
Click to expand...
Click to collapse
I don't know. He doesn't have any data plan with rogers just voice so I guess he is like pay as you go for 3G.
And just like me with my old iPAQ PDA phone I get billed for data usage every now and then for something I've never used. The most I got was 40 bucks. Didn't bother complaining since my time getting on hold by customer service is worth more than $40.
hat gps application is used in your diamond?
raidendb said:
I got my Rogers branded HTC Diamond yesterday and so far it'll let me install any apps I want. Internet works through wifi and 3G. I can't find a way to turn off 3G connection. GPS works but acquiring sat lock takes like 5mins compared to my old EU/Asia Diamond which locks to sat in 30sec.
Click to expand...
Click to collapse
Hi, I am about to buy the rogers diamond. Since GPS is my must have function in a smart phone, could you tell me what gps application is used in your diamond?
Do you know if iguidance 3.0 works in rogers diamond?
Thanks
FYI
I am using Tomtom 7.91 on Diamond, it has about 2-3 seconds lag, very annoying
I'm using iGO8. So far great that is if it locks to a sat signal. Nothing wrong with iGo8 but I think it the radio version that came with Rogers branded diam.
hpod06: when you say 2-3 sec lag, do mean that your position on the gps is 2-3 sec late from actual. If so then same here. And same with my other iPAQ gps phone. So I think it's not the gps apps thats causing this delay but the gps chip used by phone. Well the lag doesn't really bother me since gps apps announces your next maneuver before hand. Just need to get use to it.
dsixda said:
The Rogers one is 1.00.25.06.. wouldn't that be better, if not almost the same (version number)?
I'll go driving tonight to test mine
Click to expand...
Click to collapse
I'm using Radio 1.00.25.08 on Roger's in Toronto...been quite happy with it's performance.
ROM v: 1.93.831.1 WWE
HTC Touch Diamond P3700
Avoid rogers diamond!
I had to exchange rogers diamond to iphone even though I am always not a apple fan.
For whatever reason, the performance of rogers diamond is unacceptable. i.e. Multiple applications running concurrently would just hang the system. It's like a single thread system
I called the customer service, and the customer service manager didn't explicitly deny the problem when i pointed out, which imply this could be a common issue to the rogers diamond. As I have been reading all the diamond review, bad performance seems a always an issue. Some said, it's being significantly improved after upgrading to the new firmware, but at least this is not the case on rogers diamond. Regardless the underlying reason, i highly doubt rogers did a real integration test on diamond!!

ATT Tilt- possible radio problems, total noob needs help

Hi guys, I really did search first, I promise. I have been having connectivity issues (not making calls, lost data connections, etc...) since I updated to the ATT Official Windows Mobile 6.1 ROM (3.57.502.2 WWE) with radio version 1.65.21.18. I am trying to determine if I need to upgrade my radio version. I found the thread with all the radio versions for my phone but don't know anything about them. I did get that I should try different ones until I find one that works for me. So do I need to install the HardSPL on my phone (or did the Official ATT rom upgrade do that already)? From there do I run that RUU.exe file on the desktop (or what)? It would be great if someone could put this in super simple terms for me.
Thanks in advance,
-Max
one word for your info, "WIKI"
I did look over the wiki for some time, here is my hang up. Jockyw2001 posted in an SPL thread that "SPL3.56 is part of the latest AT&T Rom which is dated June 6. 2008" So since I did the official ATT upgrade and my ROM date is 07/17/08, does that mean that I already have SPL 3.56 on my device? I can not find a post about how to determine what SPL version (if any) is installed on my device. If SPL is already installed, is there any danger in installing an older version of SPL or reinstalling one?
Thanks again
-Max
maxjenius211 said:
Hi guys, I really did search first, I promise. I have been having connectivity issues (not making calls, lost data connections, etc...) since I updated to the ATT Official Windows Mobile 6.1 ROM (3.57.502.2 WWE) with radio version 1.65.21.18. I am trying to determine if I need to upgrade my radio version. I found the thread with all the radio versions for my phone but don't know anything about them. I did get that I should try different ones until I find one that works for me. So do I need to install the HardSPL on my phone (or did the Official ATT rom upgrade do that already)? From there do I run that RUU.exe file on the desktop (or what)? It would be great if someone could put this in super simple terms for me.
Thanks in advance,
-Max
Click to expand...
Click to collapse
So you are saying that the stock rom and stock radio are not working correctly, no cooked roms or other carrier radios?
Did the problems start right after you updated?
Oh and your problem seems similar to the one in this thread here, well least is sounds similar to me anyways...
SavageWolf said:
So you are saying that the stock rom and stock radio are not working correctly, no cooked roms or other carrier radios?
Did the problems start right after you updated?
Oh and your problem seems similar to the one in this thread here, well least is sounds similar to me anyways...
Click to expand...
Click to collapse
Yup, stock radio and rom as suggested by ATT, whom their customer service now claims they do not support WM6.1. I've never used a cooked rom and really only come here for device information and applications. I did have problems before I upgraded the rom but they have much worse since. The thread you posted is similar but they mostly talk about an "H" connection. I am in the DC metro area (USA) and get 3G all the time now, I wonder if that is part of the problem, I never get an EDGE network signal anymore.
Well... I just found THIS buried over on the ATT support forums
Clp1970 01-21-2009 10:33:16 AM
I guess we just got 3G network here. I haven't been able to make/receive calls for 5 days now. Tech support supposedly looking into issue. My phone switches bewteen 3G and EDGE constantly. Anyone else having this issue? What was the resolution? I don't want a refurbished Tilt if they can't come to a resolution (why would I want the same darn phone if it doesn't work well with 3G as advertised?) I have already drove 20 minutes to the nearest store for a new SIM card..which did no good. There isn't anyway of turning off 3G network unless I install software I have seen mentioned on this forum and well, I don't know about that...I paid for this phone to do what it said, and it isn't.
Click to expand...
Click to collapse
And this is the reply to it over there....
tilteduser 01-21-2009 08:42:13 PM
Common problem that can be either due to problems with the rollout or that the local towers cannot handle 3G as effectively or at a greater distance as the same tower could for Edge. These are some related threads and posts but there are a lot more. As noted in these posts if there is a local AT&T store run by AT&T then you might pop in and confirm some of the problems with them.
http://forums.wireless.att.com/cng/...lar&message.id=103583&query.id=659420#M103583
http://forums.wireless.att.com/cng/...lar&message.id=103054&query.id=659420#M103054
http://forums.wireless.att.com/cng/...gular&message.id=92693&query.id=660536#M92693
The tendency is to blame the phone but the reality is often different and that includes from customer support who offered to swap my phone several times but this obviously would not work because it affected many other users as well differing phone manufacturers and models.
Click to expand...
Click to collapse
Timing of it is close enough to make me wonder, but I had been using HSDPA.. But I have been getting the same problems you are talking about when the phone is set to 3g as well. The other thing that is starting to make me think its something ATT did to their network is that the OP from the thread that I linked on here lives 20 mins west of my location, and I am 15-20 mins north of DC... I may go to one of the local att stores and see what they have to say (tho that means for me that I get to flash my phone back to the stock rom )

Massive reception dead spots (voice calls, data), possible 3G fault?

Please help. I have been with o2 now for a while and I’ve never had a reception problem this bad… I’ve brought my friends Kaiser. On T-mobile he had great reception around where we live and work but since I have unlocked it I have never had a satisfactory level of reception. I have tried lots of SPL’s, ROMs and radio ROMs (including the stock o2 one) and they are all as bad as each other, give or take. The number of bars of reception varies across the range but they all have the same massive dead spots with no radio reception at all. I have tried other phones i.e. nokia’s, samsung’s and a Hermes I had none of these dead spots.
Now here is where I may betray my noob status, I was beginning to believe it was something wrong with the o2 settings in general because it is like the phone is only picking up reception from certain cell towers (maybe o2 ones?!?) and ignoring others, is this possible or am I just grabbing at straws? Then I discovered a most promising the thread http://forum.xda-developers.com/archive/index.php/t-335074.html which is full of people with 3G faults perhaps my problem is linked to the 3G mast nearby and so in fact my phone only works where there is a poor signal and no 3G which forces it to use GSM. I have tried to prove this but my current ROM Mobile Vista 4.00 SeaDragon 5.2.21109 seems unable to remember the GSM setting, the phone locks up and require a soft reset. I am sure it can’t be a hardware fault as suggested in the above thread because my friend had the phone working flawlessly.
Any suggestions as to what I can do. I’ve been at this problem for over 4 months now and am close to admitting defeat, I believe the problem may be beyond me...
I believe you should be posting at General Kaiser Forum instead
My strongest suggestion is go back to factory (OEM) including the SPL and ROM, so you can be sure it's not ROM/Radio. If that's ok, then you need to carefully match the Radio/SPL/ROM. Some radio is only for WM6.0 (check the Radio FAQ, included on the sticky FAQ thread).
Ok I have made a bit of progress but would like some advice. Now that I am aware of the 3G fault I have been keeping an eye on my signal and each time just before the signal dies the phone is trying to switch from gsm/edge to 3G/HSPDA. I have flashed my rom again this time with a reconstructed T-mobile UK rom that I found through the revert to original rom and SPl for waranty returns (Thanks a lot jcespi2005). I now have a 3G/H signal (phew atleast my phones not bricked) but am unable to make or receive calls, I assume this is because it is set up to use T-mobile settings not O2. Is there a cab out there that would let me change the settings for the OEM operator rom so I can keep this working rom. Failing that does anyone have any suggestions for a cooked rom for O2?

Categories

Resources