Database Develop

att tilt gprs problem/solution

first of all, I want to say THANKS for this great forum, which has helped me greatly souping up my Tilt, solving problems, getting great CABs, and just general info.
I had to hard-reset (removing bloatware) my device a few times, once because of a faulty usb connector, and I couldn't sync anymore. so now I'm stuck only with bluetooth (still trying to figure out if I can hardSPL and load a new ROM via bluetooth...)
I'm not in the US, so I don't use ATT/Cingular. and I ran into connection problems using GPRS. had all the right settings, but just couldn't connect to my service provider.
of course I searched endlessly on these forums, but couldn't fix my problem. today, found and ran removeHiddenProxy4CWS_0522 cab in the \Windows directory, and everything worked perfectly !!
I don't know if this is a Tilt-specific thing or not, just wanted to help out anyone having my same problem, of using a diff provider than whatever came pre-loaded...

Network icon not showing on my Tilt with 6.1

Hello! I've been lurking around these forums for a while. Off and on I would come and check out some stuff. Well I have a problem.
When I upgraded to the official AT&T rom from HTC's site, I noticed something strange. The network icon that tells you if you are in EDGE territory or 3G or GPRS or whatever...it shows basically I'm not connected to anything. It's a slight annoyance because I know the 6.0 rom showed I was in EDGE with an E. You guys know what I'm talking about? Any fixes? If someone already asked this question then I am sorry (hides). I couldn't think of what to search for.

*Flash Kick Bump*

Add the following Registry Key:
Code:
HKLM\Software\Microsoft\Shell\Taskbar\LegacyEdgeNotification
as a DWORD with the value (1).
Ta
Dave

Ty Dave! I shall download the appropriate regedit software for 6.1 and get it on!

Dave...that didn't work. I applied the key, soft reset the phone, nothing. anything else i could try?

Turbo Mach 5 said:
Dave...that didn't work. I applied the key, soft reset the phone, nothing. anything else i could try?
Click to expand...
Click to collapse
That should work for Edge. Try LegacyGprsNotification as a Dword and Value 1 forr the GPRS Icon instead.
Ta
Dave

Nope I wonder if PHM Registry Editor isn't really applying the key. It should...Let me try another reg edit.

Unfortunately that didn't work either )CeRegistryEditor(
AT&T couldn't have locked this down on their official 6.1...could they?
Hmm Daddy Might have to go ask a chef if we can't find a solution. Now I know that the network couldn't have screwed up on that particular day because my mother's Blackberry (yah I know, different) shows GPRS and I KNOW my phone should show EDGE/Gprs...
It can't be because I am using the same sim card as I had before (and not using the one that is branded AT&T 3G). Just trying to throw out some ideas

Turbo Mach 5 said:
Unfortunately that didn't work either )CeRegistryEditor(
AT&T couldn't have locked this down on their official 6.1...could they?
Hmm Daddy Might have to go ask a chef if we can't find a solution. Now I know that the network couldn't have screwed up on that particular day because my mother's Blackberry (yah I know, different) shows GPRS and I KNOW my phone should show EDGE/Gprs...
It can't be because I am using the same sim card as I had before (and not using the one that is branded AT&T 3G). Just trying to throw out some ideas
Click to expand...
Click to collapse
I've cooked several ROMs based off of the Official AT&T 6.1 ROM, and I can verify that it does correctly display G, E, 3G, and H icons. What other software have you installed?

The only other software added:
Garmin Mobile XT
M:Metrics Mobile Panel
Opera 9.5 Beta
PHM RegEdit
mfrazzz Transformer Sliding Sound
DK no Ringtone limit
Customization Tools and Customization Customize_Tool
and the Cingular crud
think it could be one of those? I have verified it not even showing if I do a hard reset. Maybe my Tilt hates me hehhe like I siad I could live without it but it is annoying not being able to see if I'm in EDGE or GPRS (or 3G if and when I enter a 3G area)

Ok I tried Advanced Configuration Tool (or whatever it's called ) and while it does apply the registry setting, the rom won't take it still. Now I just thought about this:
When the official rom came out, I did download it that day (September think it was). Could they have slightly changed the binary since and I just never knew about it?
Another thing, you think reflashing it would at least allow me to edit the registry properly?

Hello - And could you possibly help (Syncing mature newbie)

Hello,
I have been given (kindly) due to a dying SE750i a xdaII
I have set up the docking station and downloaded Activesync from Microsoft however when I plug in my xdaII into the dock the sync window appears with the little window informing me it is retrieving my settings with a spinning green graphic.
It has been doing this for 20 minutes now. Initially I thought it had crashed so I removed the phone and got the message telling me it cannot sync as the phone is off, so I placed the phone on again and it started to sync again.
It is charging fine,
The Activesync I downloaded is Version 4.5 from
http://www.microsoft.com/windowsmob...ulas/eula_activesync45_1033.mspx?ProductID=76
The xdaII software seems to be ROM version
3.50b.40CS (ROM date 01/13/07)
Can anyone help me get it to connect so I can start to make the phone mine.

Managed to Sync however still think my firmware is out of date, any clues on that?
Also noticed my connection settings for MMS and also mobile web seem to be not there.
Currently using O2 can anyone help on this?
Thank you

Two things:
You have posted you have a XDA II, but this is the forum for the XDA IIi, small difference in name but big difference in what it will do. The IIi, aka Alpine, has WiFi and is stuck on WM2003, the XDA II, aka Himalaya, doesn't and isn't.
If you search on this forum elsewhere you should find a CAB file with the settings for O2, they may even be on the O2 site itself.

Kaiser O2 to Vodaphone - web not working

Hi,
I have an O2 branded Stellar ie a Kaiser. Was working fine on O2 for internet, and just changed to Vodaphone (in the UK). Despite putting in the recommended settings of wap.vodaphone.co.uk username web/ password web into a new modem connection it won't go online. Any ideas from anyone who has done this?
Vodaphone won't help me - told me to called HTC!
cheers
Rob

Have you tried using HTC Connection Setup to reconfigure your connections?

HI - well I've been into Settings/Connections/Connections/Add a new modem connection and put in all the details I found here:
http://www.filesaveas.com/gprs.html
and it won't connect properly when I try to go online.
Or do you mean somewhere else?
thanks

If you go to Start, Settings, Connections, do you see an item called Connection Setup?
If not, try download and installing this cab on your phone. Once you install it, soft-reset and then go back to the same place mentioned above. Run Connection Setup and select your location and operator. It should configure your connections for you and restart your device (or prompt you to do it yourself).

Thanks this and another thread from Basti have got me up and running - voda needs a proxy apparantly...

The connection wizard will handle both networks
robathome said:
Thanks this and another thread from Basti have got me up and running - voda needs a proxy apparantly...
Click to expand...
Click to collapse
As someone who has used both Vodafone and (now) O2 in the UK on an HTC branded Kaiser, I've always found the connection wizard in the default HTC ROM to take care of things fully and automatically. Have you thought about putting an HTC official ROM on it? The wiki and numerous threads here at xda explain how it's done. I could never get the Vodafone Live Website to work with my standard TyTN II BTW so don't be surprised if it definitely doesn't work with an O2 version of the same phone

Can't access internet on My Wizard

Hello all.
I first want to say that I have read this forum until I thought My eyes would bleed before posting any question.
I have a cingular 8125 (Wizard) that I recently upgraded to CR96 Touch HD Version 6.5.0.1.7 RC3 and I love the rom for the most part.
After installing it, I had internet access until just a few days ago. I assumed that it was that I was still running the old Cingular config file Cingular_Wap_Medianet_MMS_Settings.cab file that I have used for years, and maybe AT&T was trying to get rid of there old settings. I have searched the site, and searched for the settings to configure the connection.
I did not find a cab file for the wizard, but found the settings and manually entered them. I could not connect, nor could I access the internet.
I then located the htc HTC_Network_Wizard_Kaiser.CAB file, and tried running it, and could not find where it installed a program to run, nor did I see that it configured a connection for me. So, Back to reading.
I finally found an AT&T_Wap_MEdiaNet_MMS_Settings.cab file that actually allowed my phone to connect to the internet for my e-mail from my work. I still however cannot access the web. I thought maybe it was caused by an registry setting that I changed trying to move the bulk of my mail to the SD card. So, I did a hard re-set on the phone. I still however am only able to get the e-mail without web browsing access.
I have not been able to locate another person that has had this issue. Please help.
Liquidd
I also want to say that I have 90% signal strength, and am still unable to connect to the web.
does anyone know where I can find the ]HTC_Network_Wizard for the Wizard phone?

Does this mean that no one knows, or that I just did not ask correctly?
Could someone please send me the HTC_Network_Wizard for the Wizard file? I will beg if needed.
Liquidd