Problems after Downgrade to Bottom ROM - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi Everybody.
After i had flashed my T-Mob. Wizard to AKU 3.3 i had some problems (Battery problems, restarts while speaking). After the TMO Support tells me they couldnt help me(Downgrade to previous ROM impossible, Re-Flash too) i wanted to try WM6 ROM.
So i tried to downgrade with Bottom ROM but on 99% my phone restarts and RUU stops with error. After that the phone starts in tricolor mode and after a few seconds it starts again.
I tried to flash Bottom ROM, Wizard Loving ROM and AKU 3.3 but the Phone restarts again while processing. IPL 1.08 and SPL 3.08 is shown.
I know i'm a damn noob, but perhaps somebody could give me some tips.
Phone is (was) a G3 (Buyed 11/05)

Is it possible that my battery is empty? Like i told i had problems with battery life time after AKU 3.3. Before i tried to downgrade i have checked the battery status and it was 89%, but perhaps this was false.
Does the wizard charge the battery in bootloader mode?

Nopes ! it doesn't charge in bootloaders mode,it'll only charge with wall charger.Switch off the phone and try to charge with a 'Wall Charger' capable of giving out put of 1.00 amp.YES ! its very much possible that while trying to recover and flashing,the battery has drained out and lost the charge. Try to get the battery fully charged again to perform any action further.
Secondly,try to downgrade first to ipl/spl 2.xx and then to ipl/spl 1.xx.
download the official carrier's rom from its website and try to flash and recover to its default status and ipl/spl 2.xx,then, flash button's rom 1.05 to get ipl/spl 1.xx.Directly flashing Button's Rom 1.05 and trying to downgrade to ipl/spl 1.xx from 3.08 creates such problems,try to downgrade gradually, 3.08...> 2.xx...> 1.xx.
Cheers!

Ok on Friday a friend of mine will give me his full charged battery.
What do you mean with wall charger? I tried to charge with normal charger and it seems to me that it doesn't charge my phone too. My normal charger (for power socket on the wall) has 1amp Output
After i upgraded to 3.08 it was impossible to downgrade to official 2.xx ROMs, thats why i tried to the Bottom ROM.
On Friday i will try the wizard_Love, Bottom and the xda_minis_launch with fully loaded battery.

where can we find 2.xx rom's???
i have the Tmobile MDA Vario 3.08

Nono01 said:
where can we find 2.xx rom's???
i have the Tmobile MDA Vario 3.08
Click to expand...
Click to collapse
This is the GERMAN AKU 2.0 ROM, i think it is a 2.xx ROM, isnt it? Its the earliest ROM Update from T-Mob! http://www.t-mobile.de/downloads/t-mobile/vario_aku2.0_05-2006.zip

hmmm, i dont know....can we get some info here please? so, the shadow and myself have IPL/SPL 3.08 and wee need 2.xx and 1.xx (if 1.xx is buttonROM then ok)

You can also download and try the T-mobile 2.26,as its also an official t-mobile Rom with 2.xx.
Cheers!

zabardast_1 said:
You can also download and try the T-mobile 2.26,as its also an official t-mobile Rom with 2.xx.
Cheers!
Click to expand...
Click to collapse
You mean that one I've posted?

shadow2000 said:
You mean that one I've posted?
Click to expand...
Click to collapse
Nopes, thats in German as you say,if if you want an English T-mobile 2.26,you can download from this link :-
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!

zabardast_1 said:
Nopes, thats in German as you say,if if you want an English T-mobile 2.26,you can download from this link :-
http://forum.xda-developers.com/showthread.php?t=342744
Cheers!
Click to expand...
Click to collapse
sorry, but the link you posted was in : G4 forum, is this official T-mobile rom 2.26 for G4, because i need G3

Nono01 said:
sorry, but the link you posted was in : G4 forum, is this official T-mobile rom 2.26 for G4, because i need G3
Click to expand...
Click to collapse
YES!!!
Its an official T-mobile stock Rom, equally good for both devices ,G3 and G4.It contains ipl/spl for both,it'll only flash the appropriate ipl/spl when detected which device it is,ok
Cheers!

Congratulation, you have successfully bricked your device.
Lolz actually, congratulation you are not alone. I am in the same situation.

underneathurclothes said:
Congratulation, you have successfully bricked your device.
Lolz actually, congratulation you are not alone. I am in the same situation.
Click to expand...
Click to collapse
what????????

Well hope you have managed to revive your wizard. In case you havnt, please try this help http://forum.xda-developers.com/showthread.php?t=276963&page=12 by Drug_store.
This really brought my Wizard back to life. I owe Drug_store one.
Best luck

So i have tried to reflash with and new battery a everthing works fine. Now i have flashed back to official AKU 3.3 and i can enjoy my wizard again.

shadow2000 said:
So i have tried to reflash with and new battery a everthing works fine. Now i have flashed back to official AKU 3.3 and i can enjoy my wizard again.
Click to expand...
Click to collapse
grrrrrrrr8 !
Glade to hear you recovered it back
Good luck!

WOW i am in the same boat but i cannot flash, apparently i didnt have my phone unlocked when i flashed so im SOL. No one has a fix for this unless i buy the unlock from IMEI and then I HAVE NO CHOICE but to give them a copy of my drivers license and i dont feel comfortable doing this so i dunno what im going to do.
BRAND NEW TMOBILE MDA FOR SALE never used except for flashing, Got it brand new from tmob a week ago and immediately attempted flashing!! haha

Related

Downgradeing HTC Wizard

Hi,
I've installed the latest AKU 3.2 Version on my Wizard.
Now i've wanted to downgrade to AKU 2.0 (with the original Loader Provided from "Vario_AKU2.0_05-2006.exe") and the tool tells me it is not possible. Is there a way to make it run?
Thanks a lot
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Nobody warns ??????????????????????????
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
mforce said:
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Click to expand...
Click to collapse
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Dr Puttingham said:
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
Click to expand...
Click to collapse
Already tried that, not working.. btw wise gramma
vseehua said:
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Click to expand...
Click to collapse
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Possible solution
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
mforce said:
Already tried that, not working.. btw wise gramma
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Click to expand...
Click to collapse
If you have a G3 device you can downgrade your IPL/SPL. I've done it my Cingular 8125 and it's 3 replacement PDA's numerous times. In addition I've downgraded at least 20 phones to 1.05 so's I could unlock and then upgrade. And then done it again. If you follow faria's instructions that is.... Now I HAVE had to flash the 1.05 twice to get the SPL down to 1.05. Humor us huh?
Note: I realize that Faria says that it doesn't work above 2.21 but I have performed this procedure on at least a dozen "out of the box" Cingular 2.25's. Downgrade to 1.05. Extract lokiwiz to the root of your C drive. Copy enablerapi.cab to your device (I know that you've unlocked your device, just indulge me please ) Execute enablerapi.cab from your PDA. get to a Dos prompt and run lokiwiz from the C prompt. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Dr Puttingham said:
If you have a G3 device you can downgrade your IPL/SPL. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Click to expand...
Click to collapse
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
A2Z said:
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Click to expand...
Click to collapse
Great! it works
stefan1975 said:
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
Click to expand...
Click to collapse
This one.. (flash it 2 times!)
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Seppl82 said:
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
Click to expand...
Click to collapse
Does NOT work, thnx anyway
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Downgrading/Upgrading
Dr P. or anyone else,
I've seen "somewhere on this board" a description of how to flash "any rom" without having to downgrade to 1.05, it stated to change the .exe file to a .rar and then change the ruu file to one that is not looking for the current phone status. I've tried that and have not had success in doing so. IF there is infact a way to do this, could someone please provide a blow by blow scenario to accomplish it?
Thanks,
vpu2
HighVoltage said:
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Click to expand...
Click to collapse
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Dr Puttingham said:
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Click to expand...
Click to collapse
Hi Guys,
I tried everything but it doesn't help das anyone had another option?
Thanks
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Dr Puttingham said:
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Click to expand...
Click to collapse
I tried everything what everybody said in this post.
Mr hokkie, please humble me and document exactly what device you own and your exact IPL/SPL/OS/GSM versions. Beacuase I just don't think that you've got in in ya to be my first failure. Show me what you got
I own a Dutch MDA Vario from T-mobile, which has a T-mobile SIM-lock. I want to remove the SIM-lock, so I tried http://forum.xda-developers.com/showthread.php?t=249474&page=1. Unfortunately it returned an error, it appears I have a 2.21 ROM, so I want to downgrade the rom, which brought me to this thread.
I've downloaded the CUSTOM_RUU_Wizard_1050412_WWE_101_11210_WWE.exe, and ran it. I get the first few screens (the caution-screen, the prepare-screen, the Update screen, the verify screen and the last screen). After that I get the screen where a percentage bar should start moving. My phone-screen is now divided in about four horizontal parts.
The first one is red-fading to black, and it reads RUU on the top-right, and the line below it reads IPL 2.21.0001. The last line in this part reads SPL 2.21.0001.
The second part is similar to the first, but it is green, without any text. The third part is similar to the green one, except it's blue.
The last part is smaller than the previous parts, it's plain white (about two lines high) and reads USB.
On my PC I get a screen telling me:
ERROR[300]: INVALID UPDATE TOOL
This Udate Uility cannot be used for your PDA Phone. Please get newer Update Utillity.
What am I doing wrong here? (BTW: I'm a computer-expert and a phone-noob)
By the way, the verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE

a question about radios

is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!

Help. Ive got a Brick !!

Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy

Wizard_love

Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
sdl said:
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
Click to expand...
Click to collapse
Are you sure you have a G4 ?
No, I have a G3. But according to "How to flash a new ROM to your Wizard... a little tutorial!" http://forum.xda-developers.com/showthread.php?t=298613, if I have an IPL/SPL of 2.xx, I need the wizard_love rom. Read last sentence of G.2.
I used the button ROM. It brought my IPL down to 1.01, but my SPL is still 2.25. Is that OK to proceed?
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
xeno1 said:
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
Click to expand...
Click to collapse
After at least 15 flashes with button, still no luck. I started with Cingular 2.25.
The button I am using is CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.
My IPL is down to 1.01, but my SPL is still 2.25. How in the world do I get passed this?
It really sucks when you can't get past the first step .
P.S. Should the SIM be in the unit during the flash? I've tried it both ways.
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
xeno1 said:
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
Click to expand...
Click to collapse
Tried it several times. No luck, SPL still stuck at 2.25, but thanks for the help. Anyone else out there with this problem?
That's weird, usually it happens the other way around and people get their IPL stuck at 1.xx when they try to upgrade back to a 2.xx but the SPL upgrades without a problem. Since you already have the button ROM on there, go ahead and try and see if it will CID unlock for you. Run lokiwiz and see if it gives you any errors and if not, download and install Wizard Service Tools on to your computer and then run it and click the CID actions button to see if it tells you that your CID is unlocked. If it does then your safe to start upgrading. For some reason I have a feeling it might just work for you.
same here, got the cingular 8125 and flashed the rom. I can not get the spl down. I have 2.25 as well. ahhh what other rom should be good for a cid unlock
also i am on activesync as "guest" dont know if this matters
ctheodores said:
also i am on activesync as "guest" dont know if this matters
Click to expand...
Click to collapse
That doesn't matter.
Try flashing Tmobile 2.26 then again the 1.05 Button ROM
From what i know the Wizard Love is only for G4 Users. G3 users should flash Tmobile stoc 2.26
not all g3 are the same!!
i have experienced the same with my g3 (IPL/SPL 2.18) when i tryed to downgrade the spl... ipl 1.05 and spl 2.18 still remain... just try to unlock spl with lokiwiz02b and relax... i tried to install tnt 5.0 23 times before i unlocked the spl... just read and apply this : http://forum.xda-developers.com/showthread.php?t=285435
i downgraded and reupgraded my spl locked g3 (qtek 9100) in 45 minutes at the state of art...
-----------------------------------------------
tnx to all people that try and try and try and teach us with his experience...
I have found that the SPL doesn't matter. Go ahead and run lokiwiz and you will be ok.
yeah i got throught just run lokiwiz02b cid unlock and then update to tmo rom

Damn - Radio ROM upgrade & now No Signal or USB (active sync)

Hi Guys, been searching but haven't really found much on this.
Right have a G3 Wizrd and loaded TNT 19209 (had ipl & spl1.06 with GSM 01.12.10)
Everything seem to be operating fine but not GPRS (settings were correct as test on another phone TMobile UK).
So decided to update the radio ROM to 2.47.11 (i think) and now unable to get any signal and even more frightening no USB connection.
I have already BRICK a phone this wk and this was to replace that one...(yeah, what a week)
Also the phone is extremely slow now too.
So advise would be greatly appreciated on this matter..
If i go to bootloader and plug in the USB it is recognised but unable to reload the radio rom from here. Do I re run the orignal ROM TNT (as i tried the onboard reinstall)
thanks
have you upgraded the bootloaders to 2.xx before uploading the TNT ROM?
madnutter said:
Hi Guys, been searching but haven't really found much on this.
Right have a G3 Wizrd and loaded TNT 19209 (had ipl & spl1.06 with GSM 01.12.10)
Everything seem to be operating fine but not GPRS (settings were correct as test on another phone TMobile UK).
So decided to update the radio ROM to 2.47.11 (i think) and now unable to get any signal and even more frightening no USB connection.
I have already BRICK a phone this wk and this was to replace that one...(yeah, what a week)
Also the phone is extremely slow now too.
So advise would be greatly appreciated on this matter..
If i go to bootloader and plug in the USB it is recognised but unable to reload the radio rom from here. Do I re run the orignal ROM TNT (as i tried the onboard reinstall)
thanks
Click to expand...
Click to collapse
How come you got IPL/SPL 1.06 and running TNT 19209 ? TNT 19209 is a wm6.1 Rom,which can only be upgraded with IPL/SPL 2.xx. Did you CID unlock the phone before upgrading to TNT wm6 rom.
zabardast_1 said:
How come you got IPL/SPL 1.06 and running TNT 19209 ? TNT 19209 is a wm6.1 Rom,which can only be upgraded with IPL/SPL 2.xx. Did you CID unlock the phone before upgrading to TNT wm6 rom.
Click to expand...
Click to collapse
Yes, i did Super CID unlock the phone before hand using the Wizard Service Tool.
Can i now upgrade IPL\SPL by using the tri screen or is there another way without booting into WM6.1? (I'll try taking sim out but don't think that will help)....
Any ideas?
thanks
madnutter said:
Yes, i did Super CID unlock the phone before hand using the Wizard Service Tool.
Can i now upgrade IPL\SPL by using the tri screen or is there another way without booting into WM6.1? (I'll try taking sim out but don't think that will help)....
Any ideas?
thanks
Click to expand...
Click to collapse
Ok,if you say its Super CID,then you must not have upgraded to IPL/SPL 2.xx,mandatory for upgrade to wm6 thats why it shows ipl/spl 1.06 or its still not Super Cid and still on its official wm5 rom.
First,check again with WST tool to verify the CID lock/unlock status,if its still unlocked,then get it CID unlocked and upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 rom and after that upgrade to any wm6 rom.
But,if it's already CID unlocked then,YES! first flash to upgrade to IPL/SPL 2.xx and then upgrade to wm6.
zabardast_1 said:
Ok,if you say its Super CID,then you must not have upgraded to IPL/SPL 2.xx,mandatory for upgrade to wm6 thats why it shows ipl/spl 1.06 or its still not Super Cid and still on its official wm5 rom.
First,check again with WST tool to verify the CID lock/unlock status,if its still unlocked,then get it CID unlocked and upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 rom and after that upgrade to any wm6 rom.
But,if it's already CID unlocked then,YES! first flash to upgrade to IPL/SPL 2.xx and then upgrade to wm6.
Click to expand...
Click to collapse
Thanks - Back and kicking now. Had to start phone in bootloader mode before i was able to flash again. Gone to TMobile 2.26. Used WST regarding CID:
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Same for SIM.
Have now loaded TNT 19209 Pro but have stuck to 2.26 for now (or should i go up a level?).
thanks
madnutter said:
Thanks - Back and kicking now. Had to start phone in bootloader mode before i was able to flash again. Gone to TMobile 2.26. Used WST regarding CID:
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Same for SIM.
Have now loaded TNT 19209 Pro but have stuck to 2.26 for now (or should i go up a level?).
thanks
Click to expand...
Click to collapse
Thanks ! glade you got it back and kicking
Well,upgrading to IPL/SPL 3.08 will not give you some very phenomenal boost or changes,it'll just slightly improve the Boot up timing only,which is hardly noticeable and nothing else,where as,it also sometimes creates problems while downgrading.IPL/SPL 2.26 are the most stable Bootloaders and have proven their worth time and again,if you are happy and comfortable with 2.26,My suggestion wud be to stick with them instead of upgrading to 3.08.
IPL/SPL
zabardast_1 said:
Thanks ! glade you got it back and kicking
Well,upgrading to IPL/SPL 3.08 will not give you some very phenomenal boost or changes,it'll just slightly improve the Boot up timing only,which is hardly noticeable and nothing else,where as,it also sometimes creates problems while downgrading.IPL/SPL 2.26 are the most stable Bootloaders and have proven their worth time and again,if you are happy and comfortable with 2.26,My suggestion wud be to stick with them instead of upgrading to 3.08.
Click to expand...
Click to collapse
Do you have 2.26? I would like to downgrade back to it. I upgraded to 3.08, but I don't really see any difference.
thurman said:
Do you have 2.26? I would like to downgrade back to it. I upgraded to 3.08, but I don't really see any difference.
Click to expand...
Click to collapse
Well,here I wud rather suggest you to keep running 3.08,as long as,it doesn't give or pose any problem,coz downgrading from 3.08 to 2.26 sometimes doesn't go successful and creates problems.
But if you really want to downgrade to 2.26,than simply flash back the T-mobile 2.26,it'll downgrade the IPL/SPL to 2.26,after that you can again upgrade to any latest wm6 or 6.1 rom,but the IPL/SPL will remain at 2.26.

Categories

Resources