Last night I turned off my herald before going to sleep. This morning on turn-on it keeps rebooting over and over again, fist HTC-logo, then windows mobile startup screen and then is start all over again. I tried a soft reset and removal of the battery without any result. My Herald is still on stock-HTC-rom. This is the second time this happens
I tried searching the herald-forum but didnt find anything
Is there any other option to try before I hard-reset ???
Niwla said:
Last night I turned off my herald before going to sleep. This morning on turn-on it keeps rebooting over and over again, fist HTC-logo, then windows mobile startup screen and then is start all over again. I tried a soft reset and removal of the battery without any result. My Herald is still on stock-HTC-rom. This is the second time this happens
I tried searching the herald-forum but didnt find anything
Is there any other option to try before I hard-reset ???
Click to expand...
Click to collapse
if u have a microSD card.. take it out.. and Reboot ur Herald with out the memory card in it.
Thanx for your reply.
Removing the microSD-card makes my herald stop rebooting but now it doesnt get past the windows startup screen
I had a similar problem after installing CorePlayer. Removing CorePlayer fixed it for me. Do you have CorePlayer installed on your device? I was glad to have Safe Mode running (http://www.monocube.com/content/view/5/37/).
I dont have coreplayer installed, in fact didnt install anything new the last couple of days and I turn off my herald every night. I think a hard reset will be my only option left
Edit: have done my hard-reset
Related
Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
GLO said:
Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
Click to expand...
Click to collapse
First thing in such cases is a hardreset.
Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups.
Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups
Click to expand...
Click to collapse
Some software or setting you've done, or it was simply Murphys Law:
When the mistake could happen, it will happen
Should i upgrade the radio at this point?
Its like with PCs, u need to reinstall your operation system from time to time.
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
CLF said:
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
Click to expand...
Click to collapse
Hi:
You can go into start/settings/system/clear storage. That will hard reset your device.
EDIT: Oops, sorry I missed your last line. Please disregard my post
God! this is too much!! I've had this damn problem pretty much fromt the start (since I bought x1). Sometimes (in fact loads of times) x1 gets stuck and I'll have to soft reset it. When I do, it gets stuck when it says Windows mobile 6.1. And nothing else happens and then i'll have to soft reset it again!! Today it happened again and I had to soft reset it nearly ten times before It got normally switched on!! What should I do??! Plleeeeeeeeaaaase help. I'm getting fed up with this.
I also did a software update using SE. followed by a hard reset. Problem persists.
Flash another ROM? Sounds like some system file was corrupted to me.
That still happens to me - 6.1 or 6.5 ROMs made no difference. Though I have noticed now that the less you install on the phone, the less chance there is for the need to soft reset over and over again. I also noticed that if I turn wifi off before I turn off the phone, it's easier booting back up.
does this happen the same with the memory card removed?
Happened to me. Hard-Reset fixed the problem for me.
I already did a hard reset: Wouldn't do ant good. I haven't tried with mem card removed.
BTW it happened again but this time It came good at the 2nd attempt.
koffeemachine said:
does this happen the same with the memory card removed?
Click to expand...
Click to collapse
I've never tried. Do you get an error when you use it as drive mode? I sometimes get an error saying that the card is corrupted.
Corrupted memory cards might cause issues too, so try another card or remove the card, as another poster suggested.
Hi all,
Since 2 days i have a Touch diamond 2, i hard SPLed it and flashed serveral roms and i liked the Energy rom the most so thats on it now. now my problem is nomatter wich rom it can't standby properly.
If i press the power button (to put it in standby) it wakes op 3 seconds later or so. it doesn't happen every time but it happens often.
What to do about this??
Greetings
Try this cab.
Also, make sure you're hard resetting after reach flash or previous settings could be retained.
what does the cab do? cause it locks thats not the problem only problem is it won't stay in standby every time.
Sets it to autolock.
You probably changed a registry setting when you installed those tweaks, so this will hopefully restore it.
i tried the cab and it doesnt fix my problem i already told you it locks fine when i put it on standby it only wakes up by itself...
WcEendje said:
i tried the cab and it doesnt fix my problem i already told you it locks fine when i put it on standby it only wakes up by itself...
Click to expand...
Click to collapse
There are other power settings in the cab from my registry and I do not have this problem so I thought it may solve your issue.
You probably need to hard reset.
Hi,
my custom ROM flashed Blackstone has this nasty habit. After some days I try to turn him on but the screen stays just black. The only way to bring him back to life is to take out the battery. Because of these freezes I overslept multiple times as the Blackstone did not wake me up.
I tried Goldlocke, Gregor G10 and Topix. I always do a task29 before flashing a new ROM. I also tried multiple radios like 1.13, 1.14 and actual 1.17. Before I had Dutty 4.3 which did not have this problem.
If anybody can give me a hint about the problem I would be thankful.
Not sure if it can help, but...
Try to delete the "Application data" folder in your microSD card.
Bye, Marco.
...
sounds like ''microp error''..
...
....................
...
''''''I try to turn him on but the screen stays just black.'''''''
***
KEEP TAPPING THE POWER BUTTON UNTILL YOU FEEL IT VIBRATE, NOW WHEN IT VIBRATES, ITS ON.. (SO STOP TAPPING POWER BUTTON)
WAIT TO HEAR ''HTCSTARTUP.WAV
NOW START TAPPING POWER BUTTON AGAIN UNTILL THE WELCOMEHEAD.PNG IS DISPLAYED..
LET ME KNOW IF YOU HAVE THE MICROP ERROR...
hurzwa said:
Hi,
my custom ROM flashed Blackstone has this nasty habit. After some days I try to turn him on but the screen stays just black. The only way to bring him back to life is to take out the battery. Because of these freezes I overslept multiple times as the Blackstone did not wake me up.
I tried Goldlocke, Gregor G10 and Topix. I always do a task29 before flashing a new ROM. I also tried multiple radios like 1.13, 1.14 and actual 1.17. Before I had Dutty 4.3 which did not have this problem.
If anybody can give me a hint about the problem I would be thankful.
Click to expand...
Click to collapse
I had similar problem, so I sent my phone to repair. Now I have new motherboard and display. Everything is O.K.
malson said:
I had similar problem, so I sent my phone to repair. Now I have new motherboard and display. Everything is O.K.
Click to expand...
Click to collapse
This is is not really good news
I have same error!! Will try the original ROM for a few days before I descide to scrap it!
...
this could also be a battery issue!
AvengerII said:
Not sure if it can help, but...
Try to delete the "Application data" folder in your microSD card.
Bye, Marco.
Click to expand...
Click to collapse
No lockup since almost a week now! It seems your "solution" works fine. Do you know the background of this behaviour?
...
probably you have installed something onto the sd card and not uninstalled it or flashed new rom, leaving the data still on the sd card and the device reading it as it would..
curvyjomanjy said:
This is is not really good news
I have same error!! Will try the original ROM for a few days before I descide to scrap it!
Click to expand...
Click to collapse
YES, I flashed original SPL, original firmware. The problem was still here. So i sent the phone to reclaim.
which folder in Application Data to delete?
I have two: HTC and Maxsense. In maxsense its just an image. in htc its databases and imagecache
...
delete entire folder..
Just tried myself deleting app data but still no joy....
I have found that my HD locks up in the dark !!
If I have the phone in my pocket, 9 out of ten times it locks up.. Only once it has locked up out of my pocket !! Screen lock is also on to stop any button press problems..
I have switched auto back light OFF and Pocket mode OFF but it still does it..
Any thoughts / Ideas please ???
try uninstalling neos drivers, and if you can't, install nmet cab to disable this drivers. in some blackstones neo's drivers seems to cause this problem.
...
solved??..
if not..
dissable "auto adjust backlight" in power settings..
Rn
My phone has started doing something kinda weird yesterday after watching a video that was recorded on it. It shows no signal, yet I can still go online through the web browser. I can send and receive texts. But when I press the home button, nothing happens. When I restart the phone, there is nothing on my home screen and when I press the phone button, nothing happens, so I can't make or receive calls. I have tried a hard reset and reloading the rom. Still the same thing. Any help would be great!
Did you install new kernel, or something like that, cause I did that before and it remapped my keeys. So buttons like home and menu were messed up. Idk.
Ok, so I got it fixed. It was less then ideal though. I used the "Clear storage" feature and cleared storage and interal storage. This also seemed to fix my Red X problem in WMDC. So I guess in the end it was alright.
I have a new problem now, so instead of making a new thread I figured I would just add to this one. Yesterday I ran outa main memory and my phone froze. I got it to restart using the power button, but when restarting it froze on the "Touch diamond" screen. I tried to reinstall the rom, but it didn't help. So then I did the "Task 29" on it, reinstalled the rom. Now it gets to the the "Touch Diamond" screen and stays there for about a minute and then restarts. It just keeps doing that. What can I do from here? I am stuck and lost.
Again, any help would be great!
Thanks.
did u reinstall the os or the complete rom.
task29 will typically wipe everything except the SPL
wpattie said:
I have a new problem now, so instead of making a new thread I figured I would just add to this one. Yesterday I ran outa main memory and my phone froze. I got it to restart using the power button, but when restarting it froze on the "Touch diamond" screen. I tried to reinstall the rom, but it didn't help. So then I did the "Task 29" on it, reinstalled the rom. Now it gets to the the "Touch Diamond" screen and stays there for about a minute and then restarts. It just keeps doing that. What can I do from here? I am stuck and lost.
Click to expand...
Click to collapse
i gt the same problem too..!!! i tried to upgrade from 6.1 to 6.5 but fail. now hang at the same screen too...!!!
any pros pls help...!!!
whykidz said:
i gt the same problem too..!!! i tried to upgrade from 6.1 to 6.5 but fail. now hang at the same screen too...!!!
any pros pls help...!!!
Click to expand...
Click to collapse
you must Hard reset the device then reFlash with official rom for your device
you must reflash A rom after task29, it doesnt need to be stock as long as you flash radio and OS