file transfering qustion - Tilt, TyTN II, MDA Vario III General

newbie here, i have a 1GB microSD card and i recently purchase a 4GB microSD card. could anyone please show me how to transfer the whole content of the 1GB to the 4GB. thank you very much in advance

Through the PC. I believe your fastest option is MicroSD to USB converter, if you have one. If not - transfer it all via Activesync (will be a bit slower). To and then from a directory on your PC. Make sure to keep everything in the exact same structure (directory tree and such) or your programs will not work.
Perhaps someone knows of a better way, but it's how I just did it last week when I upgraded.

That's exactly what I was going to suggest, using a card reader on the PC. It's worked on every WM phone I've owned and never caused issue.

Related

Copying Files from PC to Kaiser SLOW

Hello,
whencopying files - let's say some MP3 albums from PC to Kaiser via USB-Sync connection, it takes ages to complete. I guess it's about ~ 300KByte per Second.
I have a 6GB MicroSD Card Class 3 put in the Kaiser and expected a far better speed.
What is your performance?
If you're that concerned about speed, use the 6 GB card to transfer the files. Copy them from the PC onto the card using the USB reader you should have gotten with the card, then stick the card into your Kaiser.
I'm also wondering why the speed is so slow. The manual indicates that the Kaiser has "USB 2.0 Full-Speed". So why is it so slow? Doesn't support ActiveSync/WMDC USB 2?
Coping large files via Activestink has historically been slow. And on older HTC phones would cause disconnects. Two options is to use a card reader to transfer large files, the other is to use Softick Card Export to convert your phone into a card reader.
I already use Softik Card Export and I really love it. Maybe it is a little bit faster, but it doesn't exceed the USB 1 speed...
peterbonge said:
I already use Softik Card Export and I really love it. Maybe it is a little bit faster, but it doesn't exceed the USB 1 speed...
Click to expand...
Click to collapse
I just did a test with my TyTN II and Softik Card Export - not more than 1Mb/s. closer to .7Mb/s actually. I tested the USB cable with my portable USB2 drive and it was 25Mb/s - so the cable is fine.
I've emailed Softick to find out if USB2 is supported, or ever will be.
Will post here when I get a reply.
FrankyG
However, Softick Card Export is MUCH better than ActiveSync.
I'll buy it right now...
Thanks !
Chris

Cannot Read 8gb micro sdhc card on pc

hi folks
this is my first post and any help would be appreciated...
i have a mda vario 3 and am trying to install software on the sdhc card 8gb by sandisak.
my computer sees this as an external drive but still says insert disk in drive d? some colleagfues say the pc cannot read that size of the card and requires a bios update????? any ideas what they are talking about and how i fix this problem
Thanks in advance
Hi tubzy,
I'm new to this topic, but I think you'll need a SDHC compatible card reader.
In the linked thread is a solution I think.
http://forum.xda-developers.com/showthread.php?t=348995
Bye
EDA-One
no solution still
hi eda-one
sorry this still is no soluton - i do hae the latest sandisk with the card reader and once all this gear is connected to the pc it says...please insert a disk in drive f??
even though the disk is in the usb card reader
did you try format it?
If you have used the card on an 'oldish' PC without the latest BIOS or Windows updates installed it may not be SDHC compatible even using a card reader.
You can also get a situation where formatting using the standard Windows formatter or even just writing files to it from your PC will corrupt its filing system.
There are various utilities available on SD manfacturers sites for formatting and recovery.
Check out the 'Formatting and Read/Write check util in the OEM section here and download the latest drivers for your reader whilst there.
http://sandisk.com/Retail/DriverDownloads.aspx
Hope this helps.
Hi and thank you
HI
Even after trying this it still doe s not work,
I have downloaded the utility and attempted to run it but it says no usb found even though it can vonnect to a usb pen drive?? any ideas ??
thank you
I had that same problem when I first got my 4 Gb SDHC card and it was because I didn't connect the card reader directly to a USB port, instead I was using an external USB port. When I put it in to an onboard one, even though all of mine are on the back of my computer, it started working.
8gb card
Hi and thanks for your response.
i am sorry but can you please clarify what you mean to be onboard usb port. Is this the sockets where you normally connect any usb device eg a mouse to a computer or do you mean i have to take the computer apart and do it a motherboard level?
I am not very technical and apologise in advance if it sounds a silly question.
I bought the damn thing and was hoping it would and should work from out of the cardboard package. I can see this on the my computer as an external drive but when clcikcing on it it says insert disk
if the disk was faulty it would not work on the phone but on the phone it says 7.5 gb available and have stored some data there. So i think it it is a case of the pc not being able to read the card and from there i dont know what the problem is.
Any further light on this subject would really be appreciated
tubzy100 said:
Hi and thanks for your response.
i am sorry but can you please clarify what you mean to be onboard usb port. Is this the sockets where you normally connect any usb device eg a mouse to a computer or do you mean i have to take the computer apart and do it a motherboard level?
Click to expand...
Click to collapse
You have it right about what I meant. I did mean the sockets where you connect any USB device. You don't need to take your computer apart or anything. If that's what you are already doing then it's possible that the reader that you got with the card may just be faulty.
Not knowing what adapter you are using is a problem. I had similar problems with my first SDHC card and finally went to a local office supply store (Staples) and bought a "Sandisk MobileMate+ USB Memory Card Reader" for $15. It is a memory stick sized device and it accepts the SDHC MicroSD cards directly in it's slot. This works great on any PC so far.
It just may be the reader.
thanks!
This is a nightmare on elm street scenario.
I have finally tracked it to a faulty card reader, so i purchased another one. This one works and we have another problem - cannot copy data file path is too deep???????????
I am openeing another thread for that
Thanks to every1 for trying various solutions
I'm guessing you got a bad card..which is going to happen a lot with these high-cap cards, at least for a while. I am assuming you are using the small, plastic USB reader that came with the 8 gb card....that plugs directly into a USB socket? If not...I can tell you right now..the "older" adapters will NOT work with 4/6/8 gb cards. By this, i mean the adapter/reader that usually comes with the cards in the package. Also, it may sound silly..but make SURE you didnt, or are not, forcing the card into the phone/reader backwards...i know it's silly, but it's damn easy to do..and it usually trashes the card. My 8 gb just got in tonight...and it's working like a champ. I'm guessing you got a bad card. best of luck.
This is crazy. My phone reads the card just fine, but the card readers I have do not work period. 8G SDHC

Insanely Slow Data Transfer over USB

hey guys,
ever since i got my tilt, data transfer over USB has been painfully slow. for example, a 900 mb tomtom map took over 2 hours to transfer. I tried taking the SD card out and putting it into my laptop. everything transferred in less than a minute, but as soon as i put the SD card back into my tilt, it turned out it was corrupted. i tried searching for a solution to this issue, but couldn't find anything.
halp
you say ever since you got your tilt does that mean that you had other and faster transfers on other pda's because in my exp thats the case with all wm devices
no, this is my first WM phone, and first PDA ever (i had an i870 before)
activesync is slow period, i use a mediacard reader,i highly recommend a storage card and is SDHC and a compatible card reader for your laptop/desktop,can also find cards on ebay with usb readers instead of card readers so you can just plug the card into the usb stick and away you go
unfortunately that's how the USB plug works on these phones. It's USB 1.1 only.
it's not just a usb1.1 issue as usb1.1 should be able to do 12MB/sec which is far from what happens in reallife
To give you an idea, I just did a quick and dirty test of the different transfer times.
RAR: 41.7 MB
Using Activesync:
- Copy to internal memory => 01:05
- Copy to SD Card => 01:20
Using Card Export:
- Copy to SD Card => 00:51 (mean transfer rate: 850 KB/sec)
Using USB Card Reader =>
- Copy to SD Card => 00:04 (mean transfer rate: 12500 KB/sec)
Conclusion: Always use an external card reader for transfering (large) files.
Tytn II has usb 2. Why the speed is so lame then?
The Kaiser is my first device, so I don't have any other devices to compare to. But in a large degree I have noticed the same for other mobile devices (like cameras, mp3-players,...)
It has to do with some factors:
- What app is used to transfer the data?
Working through Activesync to transfer data clearly works slower. That's because AS works as just another layer controlling the data transfer, thereby slowing the process. When you use Card Export, only the regular explorer.exe process is used for tranferring the data.
- Chipset limitations:
It might be that the Qualcomm chipset has a slow MicroSD and USB controller. Manufacturers also have to choose between better battery life or more speed. Mostly better battery life is chose, thereby bringing down the speed.
My old Dell Axim x50v used to sync calendar/appt within 5 secs. But my tilt takes atleast 1 min everytime to sync calender/appt. It takes that long before the sync icon stops spinning and states connected. Do you guys have the same problem?
btw, transfer speeds for data are the same between the two pdas. its just the sync time.
It is always painfully slow to transfer files with activesync, not just the Kaiser but with all PPCs. As far as sync with outlook that is really poor with WM6 and Activesync 4.5. I think I read somewhere the reason is that activesync runs very in depth checks on changes and date comparisons resultuing in long sync times.
my main problem is not that the tilt is soo slow, but why is my sd card getting corrupted EVERY time i put it in my computer? when i copy a decent size file, all the other files are fine, but that one explodes its size like 10x and takes up 90% of the card. my only option is to format every time
weakest link set the pace
if usb2 is supported then there most be a bottleneck
elsewhere
it imho seem to have been an issue with every pda ever

Any way to use Tilt w/Linux ?

All I want to do is transfer some ringtones that I made to my Tilt, from my Linux OS. Is this possible somehow ? Or do I really have to dig up my older than hell XP laptop, then install proprietary software in order to transfer files ? Thanks.
Doug
I tried SynCE ages ago, but I eventually gave up. I usually stick to the microSD card or SSH.
same here, I've tried a ton of different things, but all have failed...
I think pof has got it working on an ubuntu machine, why don't you pm him?
Discouraging, but I appreciate the honesty. I'll try and PM pof and see what he says. Otherwise, I guess it'll be all micro SD transfers. Thanks again.
Doug
I just download everything.. I put it in a folder tree structure based on the type of file (Communications, Schedule, Utility, etc) and then I access it from the phone from the web.
Sometimes also push things over bluetooth.
You could also attempt the Card Export / WM5torage solution; which lets you access the storage card as a USB Mass Storage device; and no proprietary software is needed for that route. I think I read that someone had that working in linux.
Jason
What I have done with my Ubuntu laptop is simply send the file via Bluetooth. It's a little slow, but it works like a champ!
e
Is the card export thing a program I download from somewhere, or a cab file that enables the micro sd card to be read as a ums device ? That sounds like a perfect solution.
Bluetooth sounds good too, but my PC isn't (I didn't install one) equip with a BT card. The Macbook Pro, on the other hand... (which I've had a ***** of a time trying to get set up with the Tilt thus far...)
doug
dougrb said:
Is the card export thing a program I download from somewhere, or a cab file that enables the micro sd card to be read as a ums device ? That sounds like a perfect solution.
Bluetooth sounds good too, but my PC isn't (I didn't install one) equip with a BT card. The Macbook Pro, on the other hand... (which I've had a ***** of a time trying to get set up with the Tilt thus far...)
doug
Click to expand...
Click to collapse
Ive got a Macbook Pro. What problems have you had? Maybe I can help you out a bit? Ive had no problems so far. Bluetooth file exchange works seamlessly for smaller programs and apps. When it comes to flashing roms, just use the microsd card with a card reader and rename the .nbh to KAISIMG.nbh
If you have any questions feel free to ask me.
Also, you can get a USB Bluetooth dongle these days for all of 15USD on Ebay. I would definitely invest in one for the other computer

Tilt connection

HI, I was wondering if there is a way that I can find software that will install on my phone that I can connect to any computer. I would like to use the 8 gig sd micro for a portable hard drive storage. But there are some places that will not let me install actvsync. But it will let me charge the phone on the USB port. I travel a lot and would like to just transfer files without email
gottheit2005 said:
HI, I was wondering if there is a way that I can find software that will install on my phone that I can connect to any computer. I would like to use the 8 gig sd micro for a portable hard drive storage. But there are some places that will not let me install actvsync. But it will let me charge the phone on the USB port. I travel a lot and would like to just transfer files without email
Click to expand...
Click to collapse
Try Card Export II (you can demo it, before you pay).
There are free versions of other Mass Storage app's but seem to have problems with the Kaiser.
Ta
Dave
hi why don't u use usb2pc? the pc will think your phone (micro sdcard) is an external harddisk.

Categories

Resources