I have had the same results on three seperate phones.
All three phones have the following Device Information:
ROM version: 1.56.421.1
ROM date: 10/26/07
Radio version: 1.27.15.32
Protocol version: 22.51.88.13H
Phones hang when locked, which stops all incoming calls. Can only recover by resetting phone. This makes the phones unusable while travelling.
The symptom:
The screen cannot be activated after the power button is pressed. It is as if the phone is powered off although the LED is still flashing (slowly) indicating that the phone is still powered on.
This generally occurs after the phone is locked, the screen is switched off by briefly pressing the power button, and the phone is not in use for a while (+- 10 min).
The cure:
The power switch has no affect. The only way to get the phone to switch on is to press the reset switch at the bottom of the phone and then press the power button.
Leaf have:
a) Reloaded the ROM’s on both phones.
b) Replaced the board on one phone.
c) Replaced the phone in b) with a new phone.
None of these actions has resolved the problem.
Your help will be most appreciated.
its called the sleep of death.......there's have been threads about this in the past, dont know if there has been any resolution or not, but its a good start search for it
I has having the same problem, two to three times a week.
May be a total coincidence, but mine stopped locking up after I changed the "Today timeout" from the default 4 hours to 12 hours.
Start / Settings / Today / Items
like I said, I have no idea if this will work for anyone else - but it seems to have solved my problem.
If this happened after a phone call then it´s a known bug in the TyTNII HTC ROM, which will result in the above behaviour when a device password has been set and the screen switches off during a phone call.
If this is a known problem, how did you manage to find out?
I have not managed to find any related info on the HTC site. Also the local agent Leaf is not aware of it (to my knowledge).
Have you any idea how we communicate with HTC and actually get a response?
Does anyone on this site represent HTC or does anyone know if HTC monitors this site?
Optimistisch_nl said:
If this happened after a phone call then it´s a known bug in the TyTNII HTC ROM, which will result in the above behaviour when a device password has been set and the screen switches off during a phone call.
Click to expand...
Click to collapse
My Tilt would freeze after being asleep for a while. Never after a phone call.
The original thread has quite a bit of information on various reasons why this can occur and suggestions on how to solve it. As suggested by others, you can find this thread by doing a search on 'Sleep of Death Kaiser'. If you're feeling particularly lazy, you can use this humorous link to get the same search results.
Even if this thread *DOES* contain new and useful information, it'll be nearly impossible for others to find, amongst the other redundant threads on this topic. By starting another redundant thread, you add to the clutter of the forum, making it much harder for others to search for solutions.
As for HTC, they have their own forums, located here
(also found on google, but not the top result (5th to 10th), by searching for HTC forum.
Related
I have now done several test and have found what I believe is a serious bug in the ROM, making the Kaiser virtually useless for business users.
When the device is protected by a password (Start/Settings/Lock), the start menu freezes after ending phone calls. In addition, the backlight turns off.
This only happens if the phone call is long enough (more than a few secs) for the display to turn off during the call. This is to prevent accidental button presses. When the phone call is ended the display should come back up, however, this is where bug seems to manifest itself. Somehow the password protection gets in the way and turns the display off and freezes the start menu.
The reason why this is serious (especially for business users) is that when you use MS exchange sync, many businesses enforce policies requiring a device password (common & recommended practice). This means that the option of turning the device password off does not exist. Therefore, using exchange sync (with security policies enforced) and making phone calls does not work.
I have now made several hard resets and used two different SIM cards. However, I was not able to try this on adifferent device. Therefore, I would be grateful if somebody could try if they experience the same issue. Disabling the device password fixes this, so you won't be stuck if you try.
I will return my device tomorrow for a full refund, unless the store can show that this problem is specific to my device and that a replacement unit works properly.
Many thanks for any help!
Cheers
Magxs
what rom are you using? I have not seen this problem at all on the various AT&T ROMs.
I am using the official & released HTC TyTN II ROM on a device branded as such. Got the device on Tuesday as official retail unit, so it is not pre-production or beta.
Interesting to hear it works on the ATT ROM. HTC must have messed it up. Maybe it is just my device.
Thanks for the info.
Ok, there is a workaround now that I can live with for the moment. All you have to do is to toggle the power off and on when it hangs and it is all back to normal. Not too bad.
Hope they fix it though...
Same error for me!
Hi Magxs
I cannot tell you how pleased I was to find that someone else has experiencing the same problem! I have _exactly_ the same issue. Like, you, I use the phone for business use so there is absolutely no way I can use it without a device pin (well done on discovering that by the way). As you mention in your last post, switching it on & off fixes the issue but it's a bit of a pain.
HTC have got a good reputation on getting fixes out quickly so let's hope that'll be the case here.
Ben
Always good to know you are not alone with a problem. I also have a thread about this over at MoDaCo: http://www.modaco.com/Bug-Device-password-fre-t258974.html
The issue is getting some attention now. Just hope it is enough for them to do something about it.
Hi
I have built a small application that will hopefully resolve this problem, it is over on the thread at: http://www.modaco.com/Bug-Device-password-fre-t258974.html
The problem with the Kaiser seems to be because on a call when it has a password set it's entering an "idle" mode rather than just turning off the backlight. Idle mode is something normally not used on PocketPCs. Once in idle mode it responds to key presses etc but doesn't leave "idle mode" so it appears frozen or in an odd state as nothing lights up!
Regards
Phil
I experienced even more issues!
Please can you share with me if you have found more complete solutions?
I experience "freezing" after long calls, same as you.
But also when replying to SMSs
Even when the device is not used for some minutes: first backlight goes off or almost off, then the start button (software and hardware buttons) become not responsive:solution? Soft reset! or wait 25 secs
Please help
Saulo866
Problem is widespread
I too have this exact same problem. If the phone screen goes off during the call, the end button will lock the screen. Have you noticed that pressing and holding the end button puts a screen lock on the device?. Never seen this in any other device. Normally holding the end button cancels the Data (HSDPA, GPRS etc) connection. I will try the solution and see how I go.
This is just one of a number of problems. I also find the phone goes in "Roaming" mode even when connected to my own provider, and there are annoying problems with calendar synching. Gr8 device...but!
KaiserCallEndFix.exe needed
I cannot log in to Modaco. Even after registration, no validation email sent to me. Can any friend here post the fix for TyTN II ( KaiserCallEndFix.exe) here, so I can download it!
Thank!
This has gone rather quiet, I'm using the Reg edit listed earlier that forces screen to stay on during call but it's not ideal.
Anyone else solved it besides the button press workaround or Phil's Exe file?
I also suffering a different side effect from this problem.
I choose to deactivate the lock function to avoid the on-off procedure after the end of everycall. But every 1-2 days my device stops working because it starts asking for the lock (even though the lock function is disabled!!!!!!).
If I soft reset the device the problem disappears. Does anybody also have this problem?
Is there any news on when HTC will definitely solve this issue?
this problem stilll exists. thought it was just me. Just got 2 phones from orange - complained tothem about this bug & they sent 1 replacement phone. even though I told them it was a software issue. new phone arrived and problem is still there . Orange have escalated the issue to their technical people. I await their response. I also spoke with HTC technical support in the UK who claimed not to be aware of this issue. One thing they did agree with was that if youhave a pin , when asked to input the numbers upon switching on the device , the screen goes half dimmed so you cant see properly what you are tapping in. no mention of a fix anytime soon though. lets hope HTC do sort this out an drelease a fix because I do really like this device.
great forum btw
My phone has had this issue since I got it back in Feb/Mar 08, i just hit the power button on/off and dealt with it. I'm suprised this thread is months only and HTC hasnt fixed it yet. Why are they so slow to fix issues?
omg, thanks god that i am not going crazy,
ive been using a mda vario 3 on t-mobile,
since dec 2008, got the same freezing problem...
hoping for a update to be released by htc etc, then got a replacement phone after 6months, and still same problem.
i just spoke to the technical dept and he doesnt know any problems with this,
thanks for the insight on how it occurs.
so now im gna have a serious complaint abt this, to t-mobile.
and get htc to sort it out.
heheh
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
same problem
i have the excact same problem as you, so someone please respond
same problem
me too, absolutely no ring even after reset !!!
probably a stupid question, but have you got the profile set to automatic?
if so, it will go to silent whenever there is an appointment in your calendar.
If not, then ignore me, it was just an idea...
The profile is set to normal. I forgot to mention this. I would not ask a stupid question like that. Thanks anyway.
i have the same problem. during the day, i must restart my divece, once or twice, because my ring disapear. the microphne too, i don t hear the other person that calls me.today i went to my mobile service provider and i changed my SIM, but the problem is sthe same. i have 1.93 ROM, not cooked, is the default one. when i bought my diamond, the problem exist, when i update for the first time with the previous of 1.93 ROM, the problem wasn t.my phone was work divine.now, with 1.93, the NOT RINGING is backpls hlp me.thnx
Why don't you try a hard reset I am sure the problem will go away....
try the original rom from the htc
try to put the original htc rom 1.93 wwe and it will be work
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
I have this problem but ONLY after listening to music over a bluetooth headset.
I know this maye sound silly, but when you test your phone to make sure it is going to ring, make sure the volume (buttons of side of the phone) is up full.
A few times I have been in 'normal' made, but the phone only vibrates - this is because I have somehow lowered the volume by pressing the side keys.
May save a a few blushes, you never know!
Help
Please guys, help us solve this problem. I dont know what to do anymore, and it is driving me crazy.
Thanks.
I noticed this behaviour on my Diamond last week. Not sure if it is related but I had similar problems on my old Trinity. When switching between vibrate/silent and normal sound profile Windows would not always register this correctly. Further investigation revealed the the system volume was being updated but the phone/ringer volume stayed at silent. Do you often switch between Silent and Normal?
Never got to the bottom of this on Trinity, although it did improve (happened less often) after I flashed WM6.1 over the original WM5. As there seams to be a silimar issue on Diamond I would guess that its either a WM6.1 problem or something to do with the way that HTC's profile switcher interacts with the OS.
Only thing I can suggest as that next time it happens you check the ringer volume either using the Sounds setting (Settings tab on TouchFlo) if its set to 0% then it may be the same thing.
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
I have the same problem. I'm on 1.37 ROM - I only noticed it recently. All other sounds play fine, and the speaker volume is correct and it's not on silent or vibrate.
Phone setting is Ring AND vibrate, but trying Ring only doesn't work either.
I'm disappointed with this phone performance though think it's the Touch Flo. I tried a 1.93 but they took out the transitions - no idea if the ring worked then or not - but it was no faster IMO.
For god's sake a phone which never rings is bloody ridiculous!
I wish I kept on the original Orange UK ROM verison....
I like the idea of a hard reset - but have zero confidence it will work. I do know it will take 30 minutes minimum to set up push mail, apps and all the other stuff again.....
I have a similar problem, posted it HERE
Sounds don't work (ring tones and MP3s), I can't hear my dialog partner and they can't hear me. It's very odd. Only switching off the phone helps. I'm very disappointed with the phone's performance.
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
captainsensible2002 said:
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
Click to expand...
Click to collapse
Thanks for the advice, but I must go on searching for other solutions; because I bought it in UK and I live in Brazil. That's my problem. It must have other solution.
Nothing to do with the volume
Blazeitup123 said:
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
Click to expand...
Click to collapse
The ring is set Ring AND vibrate. The problem have nothing to do with witch volume the sound is set or the profile. And I rarely set the fone to vibrate only.
oh f**king great! I hadn't realised this was an issue and have not only unlocked my ROM but also flashed to a new ROM from the original!
Does anyone in the UK have an experience of returning a handset on Orange where this happened?
I can't find a UK Orange Diamond ROM anywhere but have flashed the OliNex Radio back to a stock HTC one......
I have an AT&T tilt and I just upgraded it to the WM6.1 ROM from the HTC webpage and since then I have noticed that when I turn of the screen, all of a sudden it just lights up for a sec and turns off again, without any reason, is there a way to fix this, do i have to flash it again? what do I have to do?
i have the same issue, seems like after i flashed it happened.. any ideas?
one cool feature is that when it flickers, if u press the screen constantly, it flickers.. like a strobe light.. lol
I have the same problem. It's annoying because I think I'm getting a text or call. and usually I don't receive texts, i have to see it light up then press the mail button to see if I have a new text. ARGH.
My Tilt does the same thing. It's a whiteish-gay light. It'll come on for short bursts or I'll notice it on in the middle of the night, and who knows how long it's on until I notice it.
I had upgraded to WM6.1 a while back, and didn't have any issues, but had to hard reset my Tilt and it has been doing it since.
It doesn't do it all the time, either. Weird.
Mine Does The Same Thing
I hope there is a fix some time for this ..
I'm glad i am not the only one, but havent found a fix yet
I seem to remember there being an issue with screen flicker when the Tilt first came out, I think it was related to having Telnav selected in the today screen items tab. Try removing the checks one item at a time from the items tab, I doubt it will be as simple as a software conflict but it could be worth trying.
I had an issue with SPB Pocket Plus on my today screen, once I moved it in to a tab on SPB Shell the issue disappeared.
Fixxed?
I dont know if it just stopped doing it, I am not paying attention anymore or if one of the many things I did finally worked, but the truth is i havent seen it do it again, Thanks to everybody
It been happening on my Tilt since I got it last month.
This is happening on my tilt too... only after upgrading to 6.1. Glad to see it is not just me, but very concerning that this is a problem directly in the 6.1 TILT rom.
Bump........
Any body have any luck on this? I continue to have this problem.
Adding my voice and another symptom
is anyone else having this problem:
1. lock the tilt by tapping 'device unlocked'
2. tap the power button.
3. the backlight comes on, no picture but instead of flashing it stays on draining the battery
4. tap the power button to turn the tilt back on
5. tap the power button to turn tilt back off again
6. tilt stays off.
the issue did not change with the backlight hotfix.
Maybe try another ROM
Finally, i found others with this stupid glitch
I thought it was a hardware error, so i had AT&T send me a warranty/replacement, and guess what... comes out of the box and STILL DOES IT! Has anyone with this problem tried installing a DIFFERENT ROM, like one from the XDA forums? I'm about to try that, because i am fed up with this. I will report if it works. ARG!
Sorry for the ranting. but in a way, i'm relieved. that there are others with this problem
... It might pay to just go back to Windows Mobile 6.0.....
-=ZYXTIA=-
Different ROM fixed problem, but just had more problems after. Sorry guys.
Me Too...
I am glad that I have found other people with the same issue as me. I thought it was just my phone, as I do a lot of backups and restores after I do something stupid with my phone and I also use a lot of beta/unstable software, and figured it was caused by these. However, it only happened after I upgraded to 6.1 stock ROM. Maybe somebody can figure out exactly why this happens, and then we can come up with a fix. I am just happy that I'm no longer alone with this issue
-Dave
I'm very pleased to know that it isn't just me experiencing this stupid backlight issue.
It started happening the second I upgraded to WM6.1
Funny thing is, it only happens to me if I Lock the phone (keys) and turn off the screen. If I just turn off the screen without locking, the backlight stays off.
It would be really great if someone could come up with a fix for this that doesnt require me to reflash my phone with some cooked up rom
has anyone tried this hotfix?
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
i'm experiencing the same problem, will try it and post back as soon as i can
edit: didn't work. got some error about it couldnt remove the old customization tool or something like that
Running the AT&T 6.1 ROM and silly thing turns on by itself at 12 midnight. No connection to anything as I leave it in Flight Mode. Only goes off after I hit the Power Button. Drains the battery down to about half by the time I leave for work at 7AM.
Really is annoying!
Possible Solution
If you are still under warranty, call up AT&T warranty replacement (Customer service is 1-800-331-0500, and just ask for warranty department), and tell them you have this problem. TELL THEM YOU THINK IT IS A HARDWARE ISSUE, and they will send you a replacement, refurbished Tilt. The next one will also have WM6.1 on it, and do the same thing. HOWEVER, it is AT&T policy that after two replacements, instead of getting another one the third time, they give you a refurb of a DIFFERENT MODEL. That is how i got the AT&T FUZE (a.k.a. the HTC Touch Pro, a.k.a the "Raphael"). It doesn't have that problem. But otherwise, i have no other suggestions. i'm just sick of having AT&T screw up the phone's software, and then try to pass it off as quality.
Mine comes on exactly at midnight!
Annoying as hell...and the light from it wakes me up from across the room.
Mack
Hi!
i am new here, and i do have a problem.
I have my HTC Diamond since 2 weeks, and it is blocking (freezing) once per day: the device is on standby, i try to turn it on, but nothing happens, always a black screen, not even the restart button works; the only solution is to remove and put back the battery.
the issue is that if someone calls me during this "freeze", he gets that my phone is ringing; but i get nothing; and not even a missed call after i succeed to turn it on.
- ROM version: 1.93.479.3 WWE
i highly appreciate if somone can help me with this problem.
thanks,
Tony
htc diamond freezing with white screen
Hi,
i have a similar problem - but not so often (approx. 2 times per week). The difference to yours is, that my screen is white (or gray/dither). My firmware Version: 1.93.407.1 GER (there is no newer)
Have you found any solution?
Guys....have a troll thru the Diamond section......you should find the soln there.....
http://forum.xda-developers.com/forumdisplay.php?f=428
Moved to Diamond/Diamond..
Me too.
Panosha: 1.93.405.1 WWE Shine On 2.4 Full
Radio: 1.03.25.18
After calls... Freezes 80% or more. I don't know if maybe it is 100% of the time when the other end hangs up first. (I don't get it with Voicemail!)
I also get freezes some other times. I don't think it is memory related, (before someone suggests it.) Also Please don't tell me to Hard Reset. I have Hard resetted to my heart's content, also directly after every Rom Update (to get GPS working)
Tony1313 said:
Hi!
i am new here, and i do have a problem.
I have my HTC Diamond since 2 weeks, and it is blocking (freezing) once per day: the device is on standby, i try to turn it on, but nothing happens, always a black screen, not even the restart button works; the only solution is to remove and put back the battery.
the issue is that if someone calls me during this "freeze", he gets that my phone is ringing; but i get nothing; and not even a missed call after i succeed to turn it on.
- ROM version: 1.93.479.3 WWE
i highly appreciate if somone can help me with this problem.
thanks,
Tony
Click to expand...
Click to collapse
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
I have a HTC Diamond running ROM 2.03.707.2 WWE, for some unknown reason, the past 2 months I keep having the following problems with my Diamond suddenly -
1. Random dial-outs to the last dialed number, when my headset is plugged in. I keep killing the calls and it keeps coming back.
2. Voice commander keeps activating without my clicking anything, and have my headset plugged in - tends to happen when I listening to FM radio/windows media player/TF music player. Same as above, I keep trying to kill it and it keeps re-activating, drives me absolutely nuts.
3. Calls tend to go on hold when I am talking halfway, I am sure my fingers did not hit the 'hold' button at all.
4. Sometimes, calls in progress are cut off - screen is off so I know cannot be because I pressed on it accidentally.
i am a noob so I have no idea of what to do about this, and I don't dare to just try and flash/replace ROMs as I am afraid that I'll brick it....
Thank god I found this thread - I had no idea what to search for; I tried 'sudden calls', 'spontaneous calls' etc. but found nothing, and by digging through all the threads I found someone with the same problems, but alas, no answer yet.
I have to permanenty disable outgoing connections because this problem is so annoying. I also noticed it happend with the headset plugged in, and for me also when I'm playing some music with win media player. I can have the device locked (hold end button), turned off (top button on phone), or turned on, and this problem always occurs.
I'm using a custom rom, dutch, ver. 1.39.479.2 (forgot which one ) , radio version 1.00.25.05 (quad band/power save/connection improved version).
Was thinking this might have something to do with the radio, but somehow it seems the headset is definately causing this since thats the only common factor.
Any help from the pro's please?
Same here.
There are other threads about this problem.
Still looking for a solution like, let's say a registry hack that disables the headset button...
HELP