Autoconfigurator Network Settings - Tilt, TyTN II, MDA Vario III General

I found it a long time ago on here, but i cant find it again.. ive been searching for a like a week, and am about to give up.. any one know where it is?
the thing im talking about, when you put your sim into the unlocked kaiser, it pops up saying "You're using Tmobile, would you like to download the settings?" etc.. and then sets it up automatically, and restarts it.
Someone had it as a cab file, and i had it a long time ago, just looking for it again, any help would be greatly appreciated.

bump...???

look at the wiki or search for connection setup

dyetheskin said:
look at the wiki or search for connection setup
Click to expand...
Click to collapse
P1Tater and Alltheway have this connectionsetup.cab in their collection.

Related

Upgrade then backup question..C'MON PEOPLE I NEED YOUR HELP!

Hello all,
I am a total novice at this stuff but request a little help. If you have 2 minutes spare please humour me and help out :wink:
I decided to upgrade my ROm etc for the first time and went to the o2 XDA site to do it.
It seemed to go fine. Then I restored my full backup from the xbackup thing, from my SD card. Is this correct? Or have I just undone my ROM upgrade? All my programs are back on but it looks the same.
If I cant restore after an upgrade, how do i get all my photos and other things back on? I can reinstall programs no prob, and contacts and calender will sync from my PC, but what about everything else?
Sorry if this question has already been asked but I tried the search facility and got nowhere.
Thanks in advance
HPJ
PS you never know, one day I might add something to this forum rather than just asking dumbass questions...
Well I got bored waiting so I bit the bullet and did the upgrade with no restore afterwards.
Seems all fine. Gotta reinstall everything I think so i'm slowly working my way through that. I'll keep posting....if anyones reading?! :!: :?:
HPJ
Glad you solved your problem. The reason that you never got an answer is that the topic of should I restore a backup after a new rom flash has been covered so many times before.
I will add a line in wiki BlueAngel For Beginners
Yeah I thought that, but the search facility seems to give so many inaccurate results that it just takes too long to go through all of them.
I'm just not technically minded, as I'm sure many others on here aren't, so more often than not we are stumped by the simplest of things.
Oh well...still far better off with the xda2s than anything else!
I understand your point on the search, it takes time to work it out and some things you just can't search for as they seem to be blocked.
The problem that we have is trying to work out the post that are based on the fact the the user has tried to find a solution and the ones that just have not.
Take the upgrade issue, we have wiki and it points you to a thread that reads Wiki, help me and yes I have read getting started. So Why do we have new threads that read upgrade failed?
On good days some of us point new users in the right direction and on bad days some of us don't. Would be nice if it was not allways the same ones.
That's the problem I had also. I'll search for stuff, but when I get results, a lot of them conflict. Not only that, but in the wiki there are things that branch off onto multiple levels. If someone ran a graphical link checker, I'm sure one would find a spider web.
I've found that I got more precise answers by posting and getting a response than going to the wiki. Although, I actually learned more by reading through the wiki....after I did what I needed to do first.
I use Linux and in the config file for Postfix, there are a million things that you can change. Looking through it I thought I had to change everything. Turns out, after I asked, I only had to make 2 changes to get it working.
I'm sure the mods and the expert posters do the best they can, but I'm thinking some spring cleaning needs to happen....from a newbie's point of view.
Tom
Tom
On the wiki side its an open site, so if you have a login you can change what it says, correct it or even add to it. Thats the whole Idea of it.
I know that its not perfect well I should anyway. However its better than nothing, it can be fixed by us all and not just a chossen few. Please remember that these people don't have the newbie frame of mind so they write what makes sence for them, leaving out information that should be understood by the reader if he is in that section. (Like the kitchen)-
So if you feel that it needs cleaning up then please do it, you have the rights, you have gained the knowlege so its all up to you or others.
Well here's a little update as to my experience upgrading the ROM and all the other bits.
It sucks! My xda2s was damn perfect before I upgraded. Since upgrading I have had to soft reset about 5 times a day, just because it decides to freeze on me.
Then, when you take it out of its cradle, it freezes...EVERY TIME!!! So whenever it comes out its cradle i have to soft reset!!!
Shurely shome mishtake??!??!!
And surely it's been fixed with something by someone on here that has 'the knowledge' (for I definitely do not, in case you hadn't noticed!).
And the benefits?? Er.......well the phone screen looks a little different...ummm.....that's it. I think. Oh yes, did I mention it freezes whenever it bloody well feels like it??!?!
Here's what the figures are now....for those of you that know what they mean...
ROM version: 1.31.00 WWE
ROM date: 12/13/04
Radio version: 1.06.00
Protocol version: 1337.38
ExtROM version: 1.31.139 WWE
Annoyance setting: Maximum
Timescale to be thrown through the nearest window: Imminent
HPJ
Have you got the O2 'today' screen still running (with O2 button top of screen)? If so that's the biggest offender of lockups in my opinion!
I followed instructions here:
http://forum.xda-developers.com/viewtopic.php?t=18350&highlight=
and since then its only locked once in about about a month...before that soft resent 3 to 4 times per day!
sounds good I'll give it a go now.....will post my results soon!!
My word I think it's worked!
See I knew it would be something simple....just took someone 2 minutes to point me in the right direction :roll:
Cheers vince
I'll crawl back into my newbie hole now until the next problem.....!!!
HPJ
i was in the same situation...only having had my XDA IIs for a month or so...was extremely hacked off that it was so unreliable! BTW did you have the connections.exe or connections.lnk? There seems to be some variation between machines...though moving out either one seems to stop the dreaded O2 software loading up!
by the way, are you using wifi connections? My XDA IIs (and others from searching on the net) seem to have a lot of problems connecting (it says 'connected' in wifi but when you try and go to a website it says "page is not available")....however I found something that said try re-entering WEP keys for known connections....and from my experience this seems to work for me. My Dell Axim organiser never had this problem...so possibly another 'feature' of the XDA IIs !!!
vincexda said:
(it says 'connected' in wifi but when you try and go to a website it says "page is not available")....quote]
For me it happends when your ip and subnet mask (in connection card settings) dont match with the wifi net you are connecting to... the pda found and connect but can not go online because is not a part of the right network (i.e. 192.168.0.1 and 10.0.0.2 usually..or subnet 255.255.255.0 and 255.0.0.0) byez!
Click to expand...
Click to collapse

Anyone get Logmein to work via Kaiser?

I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.

Telenav problem..

Just wondering if anyone is having the same problem with telenav, or if there is a fix to it. Ive looked around the forum with search and cant seem to find anything but telenav not being compatible with custom roms.
Im using Dutty's latest rom with my Tilt and i recently just added telenav to my phone, when i bring it up, it connects fine and gets to the screen where you select "drive to" and "maps". When i try to determine my own location to record it, i hit go and it basically brings up the connecting box where it goes from 0 to 100% but it doesnt move at all for me after a few mins anywhere i go..also i cant do any routes for the same reason..it seems like its just not making a good connection when im outside. I checked my connection settings, proxy is not on..set up for medianet on both connections as i read from another persons suggestion, but still no go..
assisted gps is also turned off..i can do quik gps and everything else just fine but it hangs when trying to download the route...ive re-installed the program also but no go still.
anyone have any ideas to what might be causing this?
if this problem has been resolved, ive looked and looked in the forums but maybe my eyes are blind lol.
thanks for any help.
I'm running Dutty's latest 6.1 dated April 9 and Telenav and have no issue. Runs flawless.
ok
What are your connections settings, are you on medianet?
liquidraven said:
What are your connections settings, are you on medianet?
Click to expand...
Click to collapse
Yes I am on medianet. Proxy is disabled.
gprs setting
is your gprs setting set to chap authentication, i havnt touched this but mines set to chap, but this is auto configured when setting up the network with att?
still not working..
Yah my telenav is still hanging up at getting gps when trying to find route and my location...installed gpsgate and changed the radio to 1.58.16.27 not sure what else to try..
Can't remember, but do you download telenav through Pocket IE after you flash the custom rom?
I can't remember if it auto-decides what download you get based on your PIE useragent, or if you select the product for downloading... but if it's based on UserAgent you may run into issues...
Cellular video, for example, does not work if the UserAgent is not the Tilt
yah
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
liquidraven said:
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
Click to expand...
Click to collapse
First, did you Hard reset after rom flash at the "Tap here to alighn" screen? Second, did you install Telenav prior to any cooked rom flash? The reason I ask this if you got the file from AT$T while you were using a stock rom then that is fine, but if you got while you were using a cooked rom, it is probably a bad file. The reason is that most cooked roms have the PIE User agent set to TYTN II not HTC-8900 (AT$T Tilt) which could cause a corrupt download if you indeed have a Tilt. I suggest uninstall, power down, power back up and try the file I attached. I have installed it with every rom I have tried, literally dozens and never had an issue. When I say power down, power back up, dont do a soft reset. Use the power button.
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
liquidraven said:
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
Click to expand...
Click to collapse
Good Luck. I hope it works for you.
thanks!!
lol it did fix it..thanks
liquidraven said:
lol it did fix it..thanks
Click to expand...
Click to collapse
You my friend are quite welcome. Just glad it worked.
ugh
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
liquidraven said:
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
Click to expand...
Click to collapse
Just a question but do you have assisted Gps enabled? If so, disable it. If that doesnt fix it, maybe try GPSTest?

Tilt already coming named?

Hi,
I'm new and I'm happy to be a member this site. I just received my new at&t tilt a couple of days ago. I installed the activesync software on my computer and connected my device via usb. When my device came up on my computer and I ran the short device installation my devices name was "Johnson" ... Is it suppose to come named already? Or would somebody have to had named it? Should I be alarmed? Did I get a used Tilt?
One more question, how do you delete the 10 songs that are already preloaded on the Tilt's memory?
Thanks everyone for your help. I'm so excited to have this phone. I can't wait to dive into it and do all the customizeing that I've seen. I hope to learn a lot from you guys and gals.
where did you purchase it? by default the activesync name should be something like ATT_TILT (im using a cooked rom so its something like HTC_TYTNII) so it sounds like its used..whats the call duration when you goto start>settings>device info>call duration tab ?
The call duration is showing 0's all the way accross. I haven't activated the phone yet. It should be activated tomorrow. Could the call duration time possibly be reset?
When I first turned the phone on I did go through all the set up processes like if it were brand new ...
Is there a way to change the name?
spyderrtd said:
Is there a way to change the name?
Click to expand...
Click to collapse
start>Settings>System>About>Device ID change the device name...
Strange...unless you had active sync on your computer before?
Don't think you can easily reset the usage timer, even on a hard reset.
I just installed 6.1, and it didn't reset the timer.
Welcome to the club...lots of useful info around here.
pazookie said:
where did you purchase it?
Click to expand...
Click to collapse
I bought it from newegg.com. I think they outsource though through a company called simplexity I believe.
Thanks reaper, that worked.
Thanks 007 for the welcome. Anything you could recommend that i could get started on?
Getting Started
If you haven't already, read the manual that is on the CD that came with your phone. That will always be the best place to start. Next, start browsing the forums and do some reading. After that, use the 'Search' feature to get to know what's out there and what you can do with your phone.
I've been lurking here for a couple of days, having just received my Tilt, but am finding this site to be invaluable. I also regularly visit mobilitysite.com, which used to be devoted to the Dell Axim I used to have. Quite a friendly bunch over there, just like we have here.
spyderrtd said:
Anything you could recommend that i could get started on?
Click to expand...
Click to collapse
Tilt Specific Wiki Page, here: http://wiki.xda-developers.com/index.php?pagename=TiltSpecificWikiPage
Or use the middle link in my sig.
Awesome! Thanks for all the info and links everyone. Just from those two links I already have a bunch to research and figure out.

HELP! needed with modem link program

For personnal convenience i want to to install modem link on my kaiser due to work network-restriction at work without not sucess....
i've found & installed "CDMA" version w/o no sucess with these issues
error: can't connect to COM8
kaiser is not recognized by desktop as usb-modem
my network signal is killed by program
i've foud & installed "WM6" version w/o sucess with these issues
(wmodem.link-wmodem.exe.0409.mui-wmodem.exe)
kaiser is recognized as usb-modem
my network signal is not killed by the program
but when i try to conect it comes out this error: "End data call first"
if anyone could help me with these. i will appreciate so much...
Is there a need to do a register tweak or something else???
note: i know here is internet sharing program include on all wm6.x roms's but in my country still using 2g networks and there is a big difference in performance between IS & wodem link programs.
I'm pretty sure that not even 2 weeks ago this was discussed and someone put forth a good bit of effor to document their struggles. You may want to search back a bit.
ChumleyEX said:
I'm pretty sure that not even 2 weeks ago this was discussed and someone put forth a good bit of effor to document their struggles. You may want to search back a bit.
Click to expand...
Click to collapse
did'nt notice - just found it thanks.
commander5555 said:
did'nt notice - just found it thanks.
Click to expand...
Click to collapse
but no solutions with my problem even i've searching over a year...
i've searched & found a wmodem link program & i've searched i've installed but still got error message "end data call first"
even when i've read over 500's post on subject .... don't have i the right for asking a solution?????
i think is more reduntant of reduntant just keep saying "SEARCH" for a solution without given a positive solutions... i think is better just to don't reply at all........
thanks any way.......

Categories

Resources