Related
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
I cannot get ActiveSync to detect my phone.
I get the XP message "USB Device Not Recognized" when I plug in the phone.
I have checked my USB drivers. They are more up to date (2004) than the ones listed on the Microsoft support page listed in the ActiveSync readme.doc
I am running ActiveSync 4.5 on a Windows XP laptop
Windows Mobile 6 CE OS 5.2.1620 (Build 18125.0.4.2)
on an Orange Tytn II (ok, I will flash the rom once I have a working ActiveSync!)
I have tried switching off the firewall on the laptop - no luck.
Changing the in "Enable advanced network functionality" through the 'USB to PC' connections makes no difference.
In the Get Connected Window USB is listed as having status "USB is available" after clicking Next on Checking COM ports (it takes a while).
I have uninstalled and reinstalled ActiveSync 4.5 (obtained from both the CD and the Microsoft web site).
I have done the usual cycle of switching everything off and rebooting (several times).
I have tried all four of the USB ports on my ASUS A6000.
New suggestions for things to try most welcome.
I did have the same problem myself when I first got mine. I also tried turning firewalls off etc. The only method that seemed to regularly work was to reset the kaiser and ultimately a hard reset
i had a similar problem and i found it was because i still had the nokia phone sync software on my pc too .. removing it sorted the problem
Soft reset the device, reboot the pc.
If USB syncing doesnt work, try bluetooth.
Works for approx 30 secs after reboot
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
I am having the same issue but I cant get activesync to work at all
I could recognise the kaiser on one PC but not on another, messed around and go it working then it stoped , all along it was mt Firewall, disabled the fire wall never had any more problems with activesync. that was my issue might be something for you to look into
derek-farn said:
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
Click to expand...
Click to collapse
I think your phone is ok. ActiveSync always gives all kind of problems.
I sync my kaiser on my desktop, my laptop and at work. For some reason, my desktop had exactly the same problem than yours. I tried everything!
Finally I found something that made it work much better. Go to Settings->Connections->USB to PC and uncheck the option 'Enable advanced network functionality'
After that, I still get some random disconnects, but only happens like every 3 or 4 days.
Hope it helps.
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
jmaynard said:
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
Click to expand...
Click to collapse
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
jaygriggs said:
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
Click to expand...
Click to collapse
Have you fixed the problem yet? I'm having the same problem and tried everything suggested here.
I tried it on 2 computers with Vista. First it worked, but since my laptop with XP isn't reacting on my Kaiser anymore, Vista can't find the Kaiser too. Only a friend of mine, who has a Trinity, can use activesync. Is flashing a good fix?
Found solution to my problem
I have finally found a solution that works for me (having tried everything that everybody has suggested, plus more).
I found that if you have a password enabled (ie, something that has to be typed when the phone is first switched on; available via Settings -> Personal -> Lock) and a firewall running, then an ActiveSync connection fails for no obvious reason.
Disable the firewall and your phone will prompt you for the password after which ActiveSync works.
Disable the password and there is no prompt with/without firewall and ActiveSync works.
In my case I also had to untick the 'enable advanced network functionality'.
i am starting to thing there maybe a big problems here , i have the same thing and nothing has helped,,diffant pc`s i have hard reset the phone, unticked Enable advanced network. and still nothing.
The problem that I found was the notifications queue for ActiveSync on my phone had been corrupted.
I downloaded memmaid and used the "recreate Activesync" under the database menu.
Unplug from the USB, run MemMaid and on the "JumpTo" softkey go to "Databases\Notification queue". Tap on the arrow to the right of "Add..." and tap "Recreate ActiveSync". Soft reset your phone wait 60 seconds after everything is loaded and plug the USB cable in. You should be good to go.
This is a known problem with ActiveSync and happens on a plethora of WMD's, not just the Kaiser or HTC. I used to have the same problem on an iPaq PPC. Microsoft's official answer to this was it was the OEM's fault for not following strict rules on implementing properly coded USB drivers.
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
lodger said:
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
Click to expand...
Click to collapse
Sorry partner, I guess it's not always the same problem.
hey guys,
im new here and its also my first ppc.
ive got the following problem:
me (or my ppc) is not able to connect with activesync...
wtf can i do??
plz help me, thx,
LuFo
Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?
so, here we go:
ive got as 4.5 on my pc and ive recognized also that some other guys (even with older as) could connect to my ppc...
so, what is thie fckn prob??
again: plz help, what should i do?
greetz
PaulusUK said:
Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?
Click to expand...
Click to collapse
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz
i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.
LuFo Diamond said:
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz
Click to expand...
Click to collapse
untick the advanced network functionality in the connection settings USB to PC and try again ...
swampy said:
i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.
Click to expand...
Click to collapse
2nd that. Try another USB port on your PC. Sounds like there's either the driver missing (which should only be the case if you do not have Active Sync installed)
OR
try to disable the "Advanced network functionality". Can be found at 'Settings > Connections > USB to PC'. (Einstellungen, Verbindungen, USB zu PC oder so).
Do you have some sort of firewall software?
like, ZoneAlarm or antivirus with firewall?
disable them or allow the port as trusted and you should be fine
jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...
try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.
thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.
LuFo Diamond said:
jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...
Click to expand...
Click to collapse
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
here it is
LuFo Diamond said:
thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.
Click to expand...
Click to collapse
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..
Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.
cJosephaq said:
Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.
Click to expand...
Click to collapse
Try the search engine before you post, recently there where alot of topics on ActiveSync not working. Anyway, the way your PPC will act when you connect it to a USB port can be setup in setting, connections, usb to pc. Mark Diskdrive or ActiveSync.
There you should also unmark the advanced network functionality. Check it off and try again.
Rgds,
Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.
cJosephaq said:
Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.
Click to expand...
Click to collapse
A Hard Reset should bring it back to it's default value so yes I see no problem there ...
Blazeitup123 said:
try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.
Click to expand...
Click to collapse
THX a lot, but all these programs are NOT running, ive tryed to run them and its juts possible tu run mobsync.exe mannually...
so this way would not work for me,
im sorry
on6hp said:
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Click to expand...
Click to collapse
my pc works with xp prof sp3
abinan said:
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..
Click to expand...
Click to collapse
jeah, this possibility is also told as the first option but , im sad, not the solution...
greetz
Hello there,
I've been searching around the internet now for about 3 hours to no avail, I have even resorted to emailing HTC for help. Thats how desperate I am.
I have a MDA Vario III (HTC TYTN 2) that has worked flawlessly for a long time (since christmas) but has suddenly stopped communicating with Activesync.
Im not bothered about syncing contacts etc, all i want to do is use the file browser to download and upload photos etc.
I have tried all the suggestions i have found so far (enabling adanced network functionality, disabling it, reinstalling Activesync etc.) to no working answer.
Can anyone help me?
raty
Not sure if you tried this or not. Delete your existing partnership and then reconnect it. Good luck. Activesync sux.
Hey,
I've deleted the partnerships off my vario3, and completly reinstalled activesync. Still didnt work.
Ive taken the phone into the T-mobile shop i bought it from, they seem a little too keen to send it off for repairs, maybe this is turning into more of a regular thing that i thought?
Kept onto the phone just for now, I wnt to try and fix it before i send it off.
Uh... why send it off if you fix it?
read through this thread and look at post #10 and see if your computer is detecting the device at all..
also try removing your simcard and microSD card and connect your device to your pc in bootloader mode and see if it says USB on the bottom.
ratykat said:
Hello there,
I've been searching around the internet now for about 3 hours to no avail, I have even resorted to emailing HTC for help. Thats how desperate I am.
I have a MDA Vario III (HTC TYTN 2) that has worked flawlessly for a long time (since christmas) but has suddenly stopped communicating with Activesync.
Click to expand...
Click to collapse
It's probably the Notification queues have lost their active sync bits
use Pocket IE or Opera (mobile) to download and install something like MemMaid or SKTools
you can then add the Active Sync components back into the notification queues, and then rebuild them
Once done you should be able to sync etc
notification queues! What is that?
First I ever heard of that. I am having active sync issues as well and I have tried everything in this post.
Nothing works, it connected a few nights ago and it all of a sudden stayed connected all night. I am Back to having problems again.
Does anyone know if avast will hurt active sync?
here is your answer...
http://forum.xda-developers.com/showthread.php?t=362679
read thorugh EVERY LINK and you should be good
ive read through those links and none of them have a fix for me.
The computer recognises my phone, in device manager it comes up under Windows CE USB Devices as HTC USB Sync.
i shall try the bootloader idea and report back.
@Kimtyson- if i fix it i wont be sending it off, that would be obsurd
@pjwilkin- i have never come across that before while reading about the titan, fancy sharing some knowledge?
Just got my phone into bootloader (thanks wiki) and when the usb cable is connected it says USB and the computer starts to install drivers etc.
***bump***
sorry thats not proper foru etiquet but im desperate for som answers
Some further things to try
Can you connect via Activesync using Bluetooth? What about on other PCs and on other USB ports on your PC? What happens if you delete that HTC USB Sync listing in device manager, unplug the phone, reboot the PC and then reinstall Activesync 4.5 (I use the CDROM the phone came with the phone for that)? See if you can get the phone shop to plug it into one of their PCs with Activesync or WMDC.If it's showing up in your PCs device manager then it's likely some sort of problem/configuration issue with your desktop PC it's connecting to - not a problem with the phone itself.
this has happened to me ..
i vote for changing usb ports..
you probly already did so..
please post when you fix it..
ratykat said:
The computer recognises my phone, in device manager it comes up under Windows CE USB Devices as HTC USB Sync.
Click to expand...
Click to collapse
this cancels out any hardware problems... so do as the previous posts mentioned, its all good advice.
im assuming that all activesync services etc load up ?
Hi,
I am getting a bit frustrated over this.
When I connect my X1 to my Vista x86 nothing happens (well the USB task tray icon show for about a second and vanishes again).
When I disable the "advanced option" in the USB/PC connection settings in the X1 I at least get a USB connection with something identified as "PocketPC USB Sync".
Any idea why this is happening and how I can get a real connection with the win mobile device center?
Thanks for helping me out!
Cheers,
Tillman
maybe give this a try:
http://modernnomads.info/wiki/index.php?page=Windows+Mobile+Device+Center+Troubleshooting
I've once had the issues of not able to connect my Windows Mobile device with vista too, and it can get very annoying.. good luck with it.
You might want to try and disable the firewall and then connect the device. I had this problem with Sygate Personal Firewall (sygate was bought by symantec and personal firewall is now terminated and no longer available)
Thanks for the quick response guys!
I already tried disabling the firewall (nod32) but that did not help.
Also checked all services - everything is peachy in that department.
But still - no connection.
When I switch back to "legacy mode" (disabling the advanced option in usb/pc settings on the device) then the device will tell me that I need to install active sync 4.5 or higher and wmdc still does not connect.
This is really strange...and annoying and the same time.
Any more ideas or any way for me to debug what's going on?
Thanks for you help!
Have you intalled "Windows Mobile Device Center 6.1" on your Vista-PC?
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
pf said:
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
Click to expand...
Click to collapse
Well sometimes the Mobile Device center could stuff up or not work due to some issues such as installation of Mobile Device Center 6.1 went wrong. I have experienced that I think I didn't follow the procedures correctly and things just wouldn't work. Eventually I had to do some uninstall and reinstall many times to finally get it working.
When I first plugged mine it it installed some drivers but didn't show up in the Mobile Device Center; unplugging and replugging in caused it to work...did you change settings in between plugging in for the second time?
What I have tried so far (and nothing worked):
Uninstall / reinstall WMDC
Uninstall / reinstall Win Mobile Remote Adapter (yes, this does show up once I am connected with "advanced" USB mode)
Uninstall / reinstall "PocketPC USB Sync" (shows when X1 is set to legacy USB mode)
When in "advanced" mode I can also see a new LAN connection showing up in network overview.
The same X1 on a different Vista 32bit right next to this one will connect just fine. So it's definitely about a driver or config thing with this Vista.
This is driving me...well you know what.
btw, you did try restarting your comp when performing some of those steps, and you did try different USB ports right?
I know that you had to ask.
Yes I did. I have rebooted the system several times in between all those reinstallation tasks.
By the way. When I am in USB legacy mode and reconnect the USB cable then the X1 will show a messagebox telling me that it's connecting with the host and that the user credentials / user account (having to translate here) are correct.
But still NO connection visible in WMDC.
I had the same problem with my X1. I assumed that because my HTC Diamond worked the X1 would as well.
I finally installed WMDC from the SE install cd, and bingo!! al good. Hope it works for you...
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
TillmanZ said:
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
Click to expand...
Click to collapse
maybe give event viewer a try and check under Windows Logs (not sure if it will be application or system tho)
just in case you aren't sure, in vista either type in "Event Viewer" in the start menu search bar, or type in "eventvwr"
Don't you just like vista?
That helped (to install SE's WMDC). The issue was that my HTC Universal was still connected to one USB port (for testing purposes since that device is not recognized either).
As soon as I unplugged the HTC I was able to complete the WMDC installation.
Unfortunately though it still won't connect to my X1.
Any more ideas?
what is your settings in Windows Mobile Device Center connection Settings?
Well here is my settings that is working with my x1:
Allow USB connections checked
Allow connections to "DMA"
This computer is connected to "Automatic" (this shouldn't matter)
Allow automatic device authentication checked
Allow data connection on device when connected to PC (this shouldn't matter either)
also, while this link was in the first link that I have posted for trouble shooting, just want to make sure you actually tried The offical Windows Mobile Device Center troubleshooting guide?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
namely these steps:
Quote"
If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
My device wasn’t connected during this installation.
While it is not a strict requirement that you have a device connected during the installation process of Windows Mobile Device Center, we highly recommend that you do.
"
I didn't have the DMA set (changed that now). Everything else already was like you described and it does not work.
This really freaks me out. I always hated my iTunes/iPhone connectivity but that honestly works much smoother. Of course I do understand that this behavior is non standard as I have experienced myself that the phone works with my other Vista machine but that does not really help me here.
Any update on this? I am having the same problem.
I'm having the _exact_ same problem too, but in Vista x64. I don't know why WMDC can be such a c**t sometimes, as I have never been able to 'sync' with my Media Center PC.
My only saving grace is that my laptop has Bluetooth, and syncing works great on it. I have never had success connecting the USB cable (with many options changed around of course) to either of these computers. Only Bluetooth syncing works for me...
Hopefully we can find the answer!
What USB cable are you using??? the one that came with Xperia??? Cos the one that came with my Xperia never worked out of the box, it could only charge...
I also got another extra cord which came in another box, that worked fine for both syncing and transferring data until today, now it says USB device not recognized, maybe I was trying the flash X1 with new ROM through SEUS, did the whole lower volume key and power button to get the 3 strips.
Now I am using the USB cable that came with my external HDD, that's currently working, hopefully it won't fail me.
so any ideas??? I don't want to keep changing cables...