software for external hd - Tilt, TyTN II, MDA Vario III Themes and Apps

Is there a software that would recognize an external hd connected to a Kaiser? I do have an Passport that has a lot of info on it. I guess 8GB memory card is not enough. Thnx

not using usb as the device is only a usbSlave not a usbHost
guess you could do it over bluetooth or wifi

Hmm... I wanted to carry only my hd and my phone. I thought it won't be possible and you confirmed it. With Wifi / Bluetooth I need to have another computer in place. Thnx

Seagate D.A.V.E. looks like a worthy piece of kit - but sadly not released yet

floho said:
Is there a software that would recognize an external hd connected to a Kaiser? I do have an Passport that has a lot of info on it. I guess 8GB memory card is not enough. Thnx
Click to expand...
Click to collapse
Lol, i guess when you connect it, your battery will be fast at 0%. A harddrive askes allot power, the most energy goes to spin the drive.

Related

alpine and winamp....

hello, i 'm tring to syncromnise my xda with winamp 5.23, with no luck,
it's syncro with windows xp ok, no prob from this angle, but refuse to show up in winamp...
i also want to syncro it with adobe photoshope album starter ed, so i can manage my pict better, no luck, doesn't find the xda,
both these software should detect any usb portable device,
my xda IIi is syncro via usb cradle. and wifi,
help will be rely much appreciated... i did buy this xda for using mostly these features, and kinda spoil the fun of having a so good device that cannot be used ?
windows media player can be sync ok, but i don't use media player....
ok that it.
thanks
currently your device is not being seen as a standard USB removable mass storage device, but there is software you can get that allows your phone to be seen , I can't remember what its called though. Anyway the usb on the uni is rubbish, its only usb 1.1 or something Very Very Very slow you would be much better off getting a USB card reader writer an mp3 is tansfered in less than 2 seconds instead of taking a couple of minutes
currently your device is not being seen as a standard USB removable mass storage device, but there is software you can get that allows your phone to be seen , I can't remember what its called though. Anyway the usb on the uni is rubbish, its only usb 1.1 or something Very Very Very slow you would be much better off getting a USB card reader writer an mp3 is tansfered in less than 2 seconds instead of taking a couple of minutes
yes, Alpine doesnt have usb host, but it can be emulted by special software. (but th one which I used worked too slow and gave access only to SD card an and storage - no access to ROM)

Cannot Read 8gb micro sdhc card on pc

hi folks
this is my first post and any help would be appreciated...
i have a mda vario 3 and am trying to install software on the sdhc card 8gb by sandisak.
my computer sees this as an external drive but still says insert disk in drive d? some colleagfues say the pc cannot read that size of the card and requires a bios update????? any ideas what they are talking about and how i fix this problem
Thanks in advance
Hi tubzy,
I'm new to this topic, but I think you'll need a SDHC compatible card reader.
In the linked thread is a solution I think.
http://forum.xda-developers.com/showthread.php?t=348995
Bye
EDA-One
no solution still
hi eda-one
sorry this still is no soluton - i do hae the latest sandisk with the card reader and once all this gear is connected to the pc it says...please insert a disk in drive f??
even though the disk is in the usb card reader
did you try format it?
If you have used the card on an 'oldish' PC without the latest BIOS or Windows updates installed it may not be SDHC compatible even using a card reader.
You can also get a situation where formatting using the standard Windows formatter or even just writing files to it from your PC will corrupt its filing system.
There are various utilities available on SD manfacturers sites for formatting and recovery.
Check out the 'Formatting and Read/Write check util in the OEM section here and download the latest drivers for your reader whilst there.
http://sandisk.com/Retail/DriverDownloads.aspx
Hope this helps.
Hi and thank you
HI
Even after trying this it still doe s not work,
I have downloaded the utility and attempted to run it but it says no usb found even though it can vonnect to a usb pen drive?? any ideas ??
thank you
I had that same problem when I first got my 4 Gb SDHC card and it was because I didn't connect the card reader directly to a USB port, instead I was using an external USB port. When I put it in to an onboard one, even though all of mine are on the back of my computer, it started working.
8gb card
Hi and thanks for your response.
i am sorry but can you please clarify what you mean to be onboard usb port. Is this the sockets where you normally connect any usb device eg a mouse to a computer or do you mean i have to take the computer apart and do it a motherboard level?
I am not very technical and apologise in advance if it sounds a silly question.
I bought the damn thing and was hoping it would and should work from out of the cardboard package. I can see this on the my computer as an external drive but when clcikcing on it it says insert disk
if the disk was faulty it would not work on the phone but on the phone it says 7.5 gb available and have stored some data there. So i think it it is a case of the pc not being able to read the card and from there i dont know what the problem is.
Any further light on this subject would really be appreciated
tubzy100 said:
Hi and thanks for your response.
i am sorry but can you please clarify what you mean to be onboard usb port. Is this the sockets where you normally connect any usb device eg a mouse to a computer or do you mean i have to take the computer apart and do it a motherboard level?
Click to expand...
Click to collapse
You have it right about what I meant. I did mean the sockets where you connect any USB device. You don't need to take your computer apart or anything. If that's what you are already doing then it's possible that the reader that you got with the card may just be faulty.
Not knowing what adapter you are using is a problem. I had similar problems with my first SDHC card and finally went to a local office supply store (Staples) and bought a "Sandisk MobileMate+ USB Memory Card Reader" for $15. It is a memory stick sized device and it accepts the SDHC MicroSD cards directly in it's slot. This works great on any PC so far.
It just may be the reader.
thanks!
This is a nightmare on elm street scenario.
I have finally tracked it to a faulty card reader, so i purchased another one. This one works and we have another problem - cannot copy data file path is too deep???????????
I am openeing another thread for that
Thanks to every1 for trying various solutions
I'm guessing you got a bad card..which is going to happen a lot with these high-cap cards, at least for a while. I am assuming you are using the small, plastic USB reader that came with the 8 gb card....that plugs directly into a USB socket? If not...I can tell you right now..the "older" adapters will NOT work with 4/6/8 gb cards. By this, i mean the adapter/reader that usually comes with the cards in the package. Also, it may sound silly..but make SURE you didnt, or are not, forcing the card into the phone/reader backwards...i know it's silly, but it's damn easy to do..and it usually trashes the card. My 8 gb just got in tonight...and it's working like a champ. I'm guessing you got a bad card. best of luck.
This is crazy. My phone reads the card just fine, but the card readers I have do not work period. 8G SDHC

Use as mass storage device for USB card Stereo?

I have a car stereo that will allow me to plug in a USB flash drive for example loaded with standard MP3's / WMA's or what not.
Im looking for a way to be able to hook up my ATT tilt, and have the music on there recognized as being on a mass storage device.
Im guessing there is some software out there that could accomplish this but after searching for a few days I have yet to find anything.
Anyone have any ideas?
snowmirage said:
I have a car stereo that will allow me to plug in a USB flash drive for example loaded with standard MP3's / WMA's or what not.
Im looking for a way to be able to hook up my ATT tilt, and have the music on there recognized as being on a mass storage device.
Im guessing there is some software out there that could accomplish this but after searching for a few days I have yet to find anything.
Anyone have any ideas?
Click to expand...
Click to collapse
or you could buy a scan disk usb adapter for microsd cards and that would work
thesire said:
or you could buy a scan disk usb adapter for microsd cards and that would work
Click to expand...
Click to collapse
http://www.radioshack.com/product/i...x=6&x=10&s=A-StorePrice-RSK&parentPage=search
well yes yes i know I could do that lol
But pulling that tiny freakin card in and out of my phone 1000 times im sure it will end up getting sucked into the black hole under the seat of my car never to be seen again.
Also It would be nice to do it via the phone as It would charge the phone at the same time.
Might have found something
http://www.revver.com/video/828335/wm5-storage-windows-mobile-pda-as-usb-mass-storage/
which lead me too..
http://www.modaco.com/content/smartphone-software-freeware-download-discussion/238545/wm5torage/
or maybe..
http://msmobiles.com/news.php/6602.html
anyone tried any of these on this phone?
snowmirage said:
Might have found something
http://www.revver.com/video/828335/wm5-storage-windows-mobile-pda-as-usb-mass-storage/
which lead me too..
http://www.modaco.com/content/smartphone-software-freeware-download-discussion/238545/wm5torage/
or maybe..
http://msmobiles.com/news.php/6602.html
anyone tried any of these on this phone?
Click to expand...
Click to collapse
I've never cared for the WM5Storage on the Kaiser. I've found it best to use Softick Card Export 2 to make the Kaiser into a USB Card Reader. Well worth the money.
http://www.softick.com/pocket-pc/cardexport2/

Connect USB Stick

Would it be possible to connect a USB stick to the Diamond by using this adapter ?
Diamond has no USB Host, so no
It would look ridiculous anyway. The Diamond is so small you can afford to carry that AND an Archos anyway. That is what I will do.
Ingvarr said:
Diamond has no USB Host, so no
Click to expand...
Click to collapse
I guess because the hardware doesn't support it??
I had this feature on my Flame, was cool but I didn't use it much. You could even connect KB/mouse!
Ingvarr said:
Diamond has no USB Host, so no
Click to expand...
Click to collapse
I think so too, but as you can see in service manual, htc connects an memory card reader through an Y-USB cradle to read the service-test sd card.
Doesn't that mean that there must be a way to host a device?
(The second one is an ac-adaptor.)
regards
eurofan said:
Would it be possible to connect a USB stick to the Diamond by using this adapter ?
Click to expand...
Click to collapse
Where did you find this USB Stick ?
I am searching for that to use with the Diamond and try it
Here you are:
Intos-USB-Adapter-Adapter-USB-Buchse
cable version
regards
demacus said:
I think so too, but as you can see in service manual, htc connects an memory card reader through an Y-USB cradle to read the service-test sd card.
Doesn't that mean that there must be a way to host a device?
(The second one is an ac-adaptor.)
regards
Click to expand...
Click to collapse
yeah it looks like it works on the picture.
would be nice to be able to add usbstick to our Diamond, for backup and easy install
where did the pic come from? does the diamond recognize the flash drive?
The picture is from the HTC service manual - it shows how to attach the service test sd card to the device.
I think it should recognize the drive, otherwise they couldn't test the device...
demacus said:
The picture is from the HTC service manual - it shows how to attach the service test sd card to the device.
I think it should recognize the drive, otherwise they couldn't test the device...
Click to expand...
Click to collapse
Where can we download it?
xda-dev wiki... like all the other manuals too.
Ok, I must be mistaken here then. Diamond have USB host, at least hardware support for it (unless they have some crossover MC inside this "Y-cable").
Hovewer it seems that it have only limited support in bootloader to load ROM image from memory stick.
Question is if it have the host driver in the Windows Mobile to actually support USB accesses inside WM?
Even soldered myself an y-wire for testing.
Inside Windows Mobile nothing happens when the stick is plugged in. (used an 8GB USB-Stick)
Diamond research section is not so far in the moment, so I don't know how to test if it will work in bootloader mode.
I think they have some electronics switched between device and disk, for access without driver.
edit: removed stupid thoughts, now simple using cat command...
regards
Hi
Is there any progress on this? Do you think we may have usb host for the Diamond at some point in the future?
So, let's push this thread.
I tried to connect an 8GB USB stick throught my self-soldered wire, I've put Diamond into "USB trigger mode" but without any success.
Now we have to figure out which devices can be connected in USB-mode...
I got a few exams in this week, so I'm gonna try at weekend to connect an simple sd card reader.
regards
demacus said:
So, let's push this thread.
I tried to connect an 8GB USB stick throught my self-soldered wire, I've put Diamond into "USB trigger mode" but without any success.
Now we have to figure out which devices can be connected in USB-mode...
I got a few exams in this week, so I'm gonna try at weekend to connect an simple sd card reader.
regards
Click to expand...
Click to collapse
i think you should try a smaller stick...
as i remember there were problems in "window mobiling" with external drives (SD cards..) larger than 1GB
any luck with , would be tops
any progress?... I am looking forward..
http://forum.xda-developers.com/showthread.php?t=413510

USB to PC a Disk Drive mode

Hi There,
i have been searching for a while now but i could not find it anywhere.
is there a tool for the tytn II thats makes it possible to connect it to the computer and that you get a menu with the following:
active sync
disk drive mode
internet sharing
just like the diamond.
on my rom i only have these 2 options
active sync
internet sharing
on my rom i only have these 2 options
active sync
internet sharing
Click to expand...
Click to collapse
That's because on the Kaiser nothing but the CardExport program manages to emulate disk drive mode.
Is the disk drive mode that CardExport gives you noticeably better than just exploring the phone when it's plugged in normally? I know when you do it that way it threatens to convert your files when you copy them over, but in my experience it never actually does.
The only time I used disk drive mode on my Hermes was so I could charge it via my PS3 usb port since I spend a considerable amount of time next to my PS3 (my ps3 is next to my theater chair since I have a 122" projection screen and the Projector and surround sound system - and PS3 - are next to the chairs in the back of the room.)
I haven't tried it on my Kaiser since when I got the Kaiser it came with another charger which I placed there so I don't need the PS3 to charge anymore.
I'd be interested to see if it would increase the transfer speed though.. my God is it slow..
There is one utility 'nueMassStorage' that is supposed to do this, however I can't get it to work. I have it cooked into my rom and it does indeed present you with the option of ActiveSync or Mass Storage when you connect it to a PC via USB. ActiveSync works as normal but unfortunately I can't get the Mass Storage to work - it appears as a drive but Windows can't open it.
Maybe you can have more luck with it? Its available here as an OEM package to cook into a ROM or as a .cab to install.
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
Andy
I think that's cooked into the HyperDragon III Raphael ROM.. I'll test it out later.. I only ever hit the active sync button since I don't like transferring over USB due to the ridiculously slow connection.
try WM5torage
dancj said:
Is the disk drive mode that CardExport gives you noticeably better than just exploring the phone when it's plugged in normally? I know when you do it that way it threatens to convert your files when you copy them over, but in my experience it never actually does.
Click to expand...
Click to collapse
Yes its MUCH faster.
vernoncomph said:
try WM5torage
Click to expand...
Click to collapse
does not work on kaiser unless you hack in the cardexport driver.
l3it3r said:
I think that's cooked into the HyperDragon III Raphael ROM.. I'll test it out later.. I only ever hit the active sync button since I don't like transferring over USB due to the ridiculously slow connection.
Click to expand...
Click to collapse
I'd like to know how they got this working? I have tried all the USB memory card utilities I could find (WM5torage, Card Export and nueMassStorage) and I can't get any of them to work. WM5Torage just doesn't work at all, Card Export & nueMassStorage seem to exhibit the same behaviour where they activate and Windows sees a storage card but can't access it (I think it asks if you want to format it). I have tried on 4 different Windows XP & 2003 machines and all behave the same so it is obviously the Kaiser (or the ROM).
I have MS Voice Command installed and I think I read that this might be the problem, however I gave up in the end and carry a tiny microSD-USB adapter on a keyring so I can at least get access, even if I have to take the microSD out.
Andy
Nope, nevermind. PLugged it in and it's just active sync or internet sharing.. I can't remember where I saw that... might have been another phone I was using.. lol..
rmg said:
Yes its MUCH faster.
Click to expand...
Click to collapse
Same here, much faster for big files like TomTom maps.
rmg said:
Yes its MUCH faster.
Click to expand...
Click to collapse
Hmmm... I might give it a try then. Normally I use my card reader when I have big stuff to transfer, but it'd be nice to not have to physically move my card.
ADB100 said:
There is one utility 'nueMassStorage' that is supposed to do this, however I can't get it to work. I have it cooked into my rom and it does indeed present you with the option of ActiveSync or Mass Storage when you connect it to a PC via USB. ActiveSync works as normal but unfortunately I can't get the Mass Storage to work - it appears as a drive but Windows can't open it.
Maybe you can have more luck with it? Its available here as an OEM package to cook into a ROM or as a .cab to install.
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
Andy
Click to expand...
Click to collapse
thnx mate i'm gonna try this tool
as for wm5torage even after finetuning the program it still het stuck
Damn it does not work
softick's card export 3.15
i'm using softick's card export II ver3.15 with Win XP PRO SP3
it's working fine
CEII actually started kaiser support with ver3.12.....that was working fine too...
i'm on Hyperdragon's lite rom
I have Voice COmmand instlled as well, and Card EXport worked fine for me.. I used it as a thumb drive with ym car stereo (atleast during the free trial) and it worked great.. my comptuer saw the phone as a USB drive as well.... I got the stock at&t 6.0 rom with the bloatware removed and lots of extra programs isntalled... Running Vista ultimate x64 edition....
ADB100 said:
I'd like to know how they got this working? I have tried all the USB memory card utilities I could find (WM5torage, Card Export and nueMassStorage) and I can't get any of them to work. WM5Torage just doesn't work at all, Card Export & nueMassStorage seem to exhibit the same behaviour where they activate and Windows sees a storage card but can't access it (I think it asks if you want to format it). I have tried on 4 different Windows XP & 2003 machines and all behave the same so it is obviously the Kaiser (or the ROM).
I have MS Voice Command installed and I think I read that this might be the problem, however I gave up in the end and carry a tiny microSD-USB adapter on a keyring so I can at least get access, even if I have to take the microSD out.
Andy
Click to expand...
Click to collapse
dancj said:
Hmmm... I might give it a try then. Normally I use my card reader when I have big stuff to transfer, but it'd be nice to not have to physically move my card.
Click to expand...
Click to collapse
It's faster than Activesync indeed, and maybe more importantly doesn't require it to be installed on the PC you want to transfer files from, but it's still MUCH slower than putting the card in a reader. The communication on the Kaiser's USB is done at USB1.1 speeds (~800kB/s max while a card in a reader usually results in 3-15MB/s depending on the card and reader).
kilrah said:
It's faster than Activesync indeed, and maybe more importantly doesn't require it to be installed on the PC you want to transfer files from, but it's still MUCH slower than putting the card in a reader. The communication on the Kaiser's USB is done at USB1.1 speeds (~800kB/s max while a card in a reader usually results in 3-15MB/s depending on the card and reader).
Click to expand...
Click to collapse
Yes this was my findings exactly. If you can use the card reader then do because nothing comes close in terms of speed.

Categories

Resources