Related
i went to the website
www.asia.htc.com/asia/event/WM6/index.html
and followed the on-screen instruction
what happened now is that there's an update error
i followed the step by step to recover but the thing just stuck there
now whenever i on my dopod d810,
my screen just shows the 3 color screen
and that's that
i dont know what to do!!!
help!
and this is crap
i cant seem to establish a connection AT ALL with the activesync
and whenever i want to update, it just says ERROR [286]
i did ALL the steps it suggested
- disconnect USB cable from phone
- remove the battery
- wait 3 seconds and reinstall
- when you switch on, you see 3 screens
- connect USB cable again
- resume install
and then after i resume install,
SAME PROBLEM again! ERROR [286]
its like a vicious cycle!
Just for your info
i am currently using activesync 4.5
and right now whenever i connect my usb to my phone,
the activesync doesnt seem to be able to detect the phone at all
here is the video of my several attempt to upgrade
just download it here
http://www.sendspace.com/file/ha26ws
Is there anywhere where i can download
WM6 for
- Hong Kong (ENG)?
what happened is that right now
i actually used the Aussie one and that doesnt work i think
(assuming that is the problem)
I tried the SEA one and it also doesnt seem to work
I heard that you need to use specific update
the problem is
i dont know where my dopod originate from???
is there any way to tell?
what does the tri-colour screen say?
you can check out trinityguides upgrade problem faq and see if those steps help you.. all isn't lost yet, you should be able to revive your device
let me know how it goes
the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all
I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?
Stalvros said:
I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?
Click to expand...
Click to collapse
here http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
yeah, flashing back to wm5 is a safe bet at this point...
have you tried splxploit?
thanks~
i actually fixed this problem yesterday
i found that link that you gave
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
through this
http://xman892.blogspot.com/
the strange thing is that~
the WM6 that that guy use doesnt seem to have any transcriber
while the official WM6 latest version has
It's not strange at all. The rom that you downloaded is a cooked rom. I think the cook removed any excessive stuff and so you may not find everything you want there.
Stalvros said:
the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all
Click to expand...
Click to collapse
try this, it solve my problem just like yours!!!
http://vimafeje.com/splxploit-windows.zip
Hi,
I try since 3 days to update my rom with the file from HTC e-club (RUU_Trinity_HTC_FRA_1.23.406.2_103_6275_1.38.00.11_108_Ship.exe) but when I execute the file there is the bootloader (tricolor) screen with the SPL version 1.06 and nothing until there is an 'connextion error 260' on my PC screen.
I don't know how to do please help !
thanks
using vista or xp?
stevaz said:
Hi,
I try since 3 days to update my rom with the file from HTC e-club (RUU_Trinity_HTC_FRA_1.23.406.2_103_6275_1.38.00.11_108_Ship.exe) but when I execute the file there is the bootloader (tricolor) screen with the SPL version 1.06 and nothing until there is an 'connextion error 260' on my PC screen.
I don't know how to do please help !
thanks
Click to expand...
Click to collapse
try this: http://vimafeje.com/splxploit-windows.zip
I'm using XP !
racerx_ said:
using vista or xp?
Click to expand...
Click to collapse
vimafeje said:
try this: http://vimafeje.com/splxploit-windows.zip
Click to expand...
Click to collapse
I tried it but I have :
=== Trinity splxploit by pof - pof[at]eslack[.]org
=== Exploits stack overflow on HTC Trinity SPL
[] SPL file: TRIN_HardSPL.nb
\\.\\WCEUSBSH001: No such file or directory
cannot connect to \\.\\WCEUSBSH001
My ActivSync USB connection is disabled just like they ask!
hmmm... i'm not too sure about this one.. have you tried just flashing hard-spl or something while you're in bootloader screen?
also, sometimes it takes trying more than once to get splxploit to do its thing.. Is there a message with the 260 error? i can't remember which one the 260 is
I tried to install the HardSPL but still the same error : ERROR 260 : CONNECTION ERROR !!!
My usb cable is conected
racerx_ said:
hmmm... i'm not too sure about this one.. have you tried just flashing hard-spl or something while you're in bootloader screen?
also, sometimes it takes trying more than once to get splxploit to do its thing.. Is there a message with the 260 error? i can't remember which one the 260 is
Click to expand...
Click to collapse
stevaz said:
Hi,
I try since 3 days to update my rom with the file from HTC e-club (RUU_Trinity_HTC_FRA_1.23.406.2_103_6275_1.38.00.11_108_Ship.exe) but when I execute the file there is the bootloader (tricolor) screen with the SPL version 1.06 and nothing until there is an 'connextion error 260' on my PC screen.
I don't know how to do please help !
thanks
Click to expand...
Click to collapse
When there is the "connection error 260" close the upload application and try to relaunch the installing file without deconnecting your usb cable from your ppc.
Besides, in the bottom of the bootloader screen (the white part), it must be written "USB", not "Serial".
It's it was just my ActivSync driver ! I have update it and now it's working.
Thank you for your answers !
First off...what version of active sync did you update to? Second....what if the white part of my bootloader screen doesn't say "usb" or "serial"?
I have had the same issue and for some reason only Ro update issue 3.14.4.1 seems to be able to connect to my phone too...
Expolit no longer sees my phone after upgrading to Mary Rom 1.2,
Some one else on here may be able to assist with these details...
I am using vista but my xp machine is the same too
stevaz said:
I tried it but I have :
=== Trinity splxploit by pof - pof[at]eslack[.]org
=== Exploits stack overflow on HTC Trinity SPL
[] SPL file: TRIN_HardSPL.nb
\\.\\WCEUSBSH001: No such file or directory
cannot connect to \\.\\WCEUSBSH001
My ActivSync USB connection is disabled just like they ask!
Click to expand...
Click to collapse
There's a slight syntax error in the prog. Just edit the unbrick.bat file, and replace \\.\\WCEUSBSH001 at the end by \\.\WCEUSBSH001 (one less '\'). Did it today after experiencing exactly what you did, worked perfectly, now running just fine with new loader, new radio, new ROM
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM (might have to reactive USB in activesync, don't remember)
It worked just fine for me, after quite a scary day when I couldn't get anything from my device but 'connexion' errors or 'corrupted image' errors
Cheer up, everything's gonna be fine
M
christopaaron said:
First off...what version of active sync did you update to? Second....what if the white part of my bootloader screen doesn't say "usb" or "serial"?
Click to expand...
Click to collapse
Yes - no good asking the question - getting help and then not providing the final answer
Tell all - so that ALL can learn from your experience!
Hi.
I've got windows Vista, and i have the same problem. How can i solve my problem?
I already downloaded all the updated software...
Bootloader reads "Serial" and not "USB"
I am using Kamba_a 6.2 EN, and I can not flash at all my trinity. When it goes to the bootloader, reads "Serial" and then freezes. I've tried to flash the bootloader also, but always get at the end a "CONNECTION ERROR". What should I do?
rafaelegomezb said:
I am using Kamba_a 6.2 EN, and I can not flash at all my trinity. When it goes to the bootloader, reads "Serial" and then freezes. I've tried to flash the bootloader also, but always get at the end a "CONNECTION ERROR". What should I do?
Click to expand...
Click to collapse
If you have HardSPL (Olipro 1.20, Olipro 1.30 or Des' Crash Proof) installed, check this and this.
First of all, thanks for your attention. I've been going through all the related links starting from those you sent. The CID on my trinity is HTC__001, and I can't find any cooked ROM with such CID so I can flash from the miniSD. By the other hand, the white strip of my bootloader reads "Serial". Is there any way I can change that to "USB". Otherwise, all the other ROMs I'm trying are giving me the same 206 communication error.
To whom it might be useful: My bootloader was giving me only Serial connection, and I couldn't make any flash. It ended up being the USB Cable!!! The bad one let me sync, upload/download files, everything exept flashing.
rafaelegomezb said:
First of all, thanks for your attention. I've been going through all the related links starting from those you sent. The CID on my trinity is HTC__001, and I can't find any cooked ROM with such CID so I can flash from the miniSD. By the other hand, the white strip of my bootloader reads "Serial". Is there any way I can change that to "USB". Otherwise, all the other ROMs I'm trying are giving me the same 206 communication error.
Click to expand...
Click to collapse
rafaelegomezb said:
To whom it might be useful: My bootloader was giving me only Serial connection, and I couldn't make any flash. It ended up being the USB Cable!!! The bad one let me sync, upload/download files, everything exept flashing.
Click to expand...
Click to collapse
Every WWE ROM available here is HTC_001 CID. So you can flash any WWE ROM with the RUU or by SD.
As for the Serial issue, connect the Device to the PC with the USB cable an it will change to USB.
Be shure to read the Bible first!!!
htc not working
i tried to run splxploit-windows on windows vista, but there is a problem:
[]Spl file: TRIN_HardSPL.nb
\\.\WCEUSBSH001: no such file or directory
cannot connect to \\.\WCEUSBSH001
in my trinity in the red rectangle shows in white letters:
TRIN100
IPL-0.50
then in yellow letters:
Trin100
SPL-1.07.0000
The green and blue rectangles show nothing and the white shows USB.
how can i fix this
help plz...
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!
Hi,
I am trying to downgrade my Pda2k from WM6.1 to WM2003 but after running the "MaUpgradeUt_noID.exe" I don't get the current version not even the version that I am switching to.
I removed the cradle, before doing so ended the process of "wcesscom" and "rapigmngr", and put my device on bootloader mode. The I plugged it back and "USB" appeared on the screen and below is "v2.07". Still it does not work.
I am using the correct "MaUpgradeUt_noID.exe" and also the right "nk.nbf".
I have downgraded before but I don't know why its not working now.
hi and welcome to the forum. the only real problem is, that the version is not showing up on the 2nd screen of the RUU. the version that is currently on the device is not necessary.
that can have so many reasons, first you should try to follow the instructions in my tutorial word by word and if that does not help, post the log of the upgrader, maybe the CRC of the rom is not correct. that seems to happen a lot lately.
progammer said:
Hi,
I am trying to downgrade my Pda2k from WM6.1 to WM2003 but after running the "MaUpgradeUt_noID.exe" I don't get the current version not even the version that I am switching to.
I removed the cradle, before doing so ended the process of "wcesscom" and "rapigmngr", and put my device on bootloader mode. The I plugged it back and "USB" appeared on the screen and below is "v2.07". Still it does not work.
I am using the correct "MaUpgradeUt_noID.exe" and also the right "nk.nbf".
I have downgraded before but I don't know why its not working now.
Click to expand...
Click to collapse
It could be that the nbf doesn't like the RUU. Why don't you try flashing to a stock rom?
Chef_Tony said:
hi and welcome to the forum. the only real problem is, that the version is not showing up on the 2nd screen of the RUU. the version that is currently on the device is not necessary.
that can have so many reasons, first you should try to follow the instructions in my tutorial word by word and if that does not help, post the log of the upgrader, maybe the CRC of the rom is not correct. that seems to happen a lot lately.
Click to expand...
Click to collapse
i followed your steps throughly all the time. where can i find the log?
egzthunder1 said:
It could be that the nbf doesn't like the RUU. Why don't you try flashing to a stock rom?
Click to expand...
Click to collapse
i have windows mobile 6.1 installed
i want to downgrade it to 2003SE inorder to install WM6.5.5
its original windows was 2003SE
if there is another way of returning back to the old windows then let me know else you can help me with the question that i have asked from chief
05/06/2010 10:44:07.906 **************** Logging Started ****************
05/06/2010 10:44:07.906 Process L:\A Siar\A Siar\PDA 2K\BA_WM5_Downgrade_pack\BA WM5 Downgrade pack\Downgrade to WM2003SE\MaUpgradeUt_noID.exe p(1776)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in CRAPIListener::AcceptConnection : hr = 0x8007274a - rapiconnection.cpp(268)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in CRAPIDesktopPrivate::ReceiveConnection : hr = 0x8007274a - RAPIDesktopPriv.cpp(372)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in ServerThread : hr = 0x8007274a - rapimgr.cpp(493)
05/06/2010 10:44:21.437 **************** Logging Stopped ****************
Click to expand...
Click to collapse
This is the log that I got from "C:\DOCUME~1\Home\LOCALS~1/Temp/WCESLog.log" file of my windows
It worked!
How?
In the wiki its said to also kill the "rapimgr" but if you kill that it will not work so only kill "wcescomm.exe" and "WCESmgr.exe".
Then I tried to upgrade it to 6.5.3 but again found the same problem, here is how to overcome that one too.
Its mentioned in the post of "Chef_Tony" to disable the USB connection but after doing so it didn't work cuz I got error from windows that "USB device couldn't be recognized" so I think because of this the rom version while upgrading didn't appear. However, again from ActiveSync I enabled the USB connection and it worked.
Thanks Chef_Tony and egzthunder1.
actually, for an upgrade from wm6.1 to wm6.5.3, a downgrade to wm2003 would not have been necessary. you'd only ever have to upgrade again, if your storage capacity is 43mb instead of 60mb. you can up- or downgrade between different cooked roms directly.
but since you made it work, it's ok, just as a time saver for next time
Thanks for the tip!
While I am glad it worked out, the solution doesn't make much sense...
meh...
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
Might have been more help asking in the hspl thread but nevermind . Try a different cable (most mini usb cables will do)
SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
no need to go crazy, this can be fixed.
you shouldn't enter the bootloader yourself, it won't flash that way.
what error did it say in automatic mode?
syrian
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
SYRIAN4E said:
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
Click to expand...
Click to collapse
ok did you turn firewall off? turn proxy off too, if you have a proxy.
if that doesn't sort it, I can still help you if you message us via this link: http://support.htc-unlocks.com/
syrian
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
SYRIAN4E said:
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
Click to expand...
Click to collapse
you shouldn't enter the bootloader like that, the flash won't work that way.
I replied to your priv. message
syrian
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
SYRIAN4E said:
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
Click to expand...
Click to collapse
the screenshots are very helpful in seeing what your problem is.
ok, after 3rd step now try copying Manual SSPL exe (link: http://forum.xda-developers.com/attachment.php?attachmentid=232407&d=1254155476) on the phone, run it, it should then show SSPL screen on the phone. then use the Manual flash mode on the PC. let me know if it works that way
syrian
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
SYRIAN4E said:
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
Click to expand...
Click to collapse
what do you see on the phone screen at this point?
syrian
nothing just the file maneger when i launch the manual sspl cuz the device lag
SYRIAN4E said:
nothing just the file maneger when i launch the manual sspl cuz the device lag
Click to expand...
Click to collapse
ok you did step "3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK"
and then you run the manual sspl EXE on the phone, it still lags ?
I'm asking to make sure you did not do a hard reset or anything (I mean, don't do hard reset)
syrian
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
SYRIAN4E said:
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
Click to expand...
Click to collapse
ok one last check.. send me a screenshot of your phone showing the IMEI to make sure it's OK.
but do not post the screenshot publicly, send it in private message.
syrian
come on xda help me lol
SYRIAN4E said:
come on xda help me lol
Click to expand...
Click to collapse
alright I realized that the second file was the wrong version. I sent you the correct file in PM, let me know if it worked
syrian
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
SYRIAN4E said:
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
Click to expand...
Click to collapse
glad to help. as I said, the manual SSPL in the thread was the wrong version. I forgot to update it at one point, will add it in the thread now. (most people can just go and use automatic mode so nobody noticed there was an issue with the file.)
Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4 .49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?