Hello all,
I've tried about 3 or 4 updating of Blue angel on my O2 XDA III but no one works on it and I've updating the ROM to 1,15 but therefore no working .
Plz I wanna get the suitable Updating to WM 6 or WM 6.1, which I can fix on XDA III without problems .....
You have to be more descriptive...
What did you try?
What directions did you follow?
What ROM did you attempt to flash?
What errors appeared when the flash failed?
Are you using XP, Vista, or something else?
What is on the phone right now? 2003 or 5?
I tried to update my O2 xda IIi with WM6.5.5_23529_eng, the process finished successfully but i am not able to restart my device. Please guide me what to do...
Mayank1901 said:
I tried to update my O2 xda IIi with WM6.5.5_23529_eng, the process finished successfully but i am not able to restart my device. Please guide me what to do...
Click to expand...
Click to collapse
Resetting Your Pocket PC Phone
Resetting Your Pocket PC Phone
You can perform a soft reset or a full reset. During a soft reset, the Pocket PC Phone is restarted and only some data in opened programs may be lost. However, a full reset turns the battery off, returns the device to its original factory settings, and deletes all programs, files, contacts, and other information you have saved to the device. Therefore, it is extremely important to back up data to a storage card or your computer on a regular basis in the event that a full reset has to be performed.
To perform a soft reset:
If your Pocket PC Phone responds slowly, stops responding, or freezes, you can soft reset it. A soft reset causes the Pocket PC Phone to restart and re-adjust memory allocation.
Unsaved data in any opened applications may be lost. Use the stylus to press and hold the Reset button, as shown below.
Related
Dear All
I would like to have some urgent help on this one. I have downloaded the new Rom Update for my XDAIIs. I have successfully started the ROM update. I reached the screen when it prompted me with the device information and I clicked on UPDATE to start the process. My XDA screen went to Black with the USB indication ...and v2.06 indicated below. Nothing happened and the wizard did not proceed with any further indication except "Checking the information in your device ..." etc...It froze on this and I had to restart my PC. Now my XDAIIs is remaining on the same blacked out screen and won't boot to its previous room if I do a soft or hard reset. Have I "Killed" my XDAIIs? Is there anything I did wrong? Pls HELP !!!!!!!!!!!!!!!!!!
Thanks
Ashraf
No Problem..
1. Do a soft reset (the screen will just blik once and still remain blank)
2. Put the device in cradle/USB
3. ReDo your upgrading procedure by double clicking the upgrade file
It should work then... good luck
same
Guys,
I have the same problem only a little more stupidity on my part, check it out at - http://forum.xda-developers.com/viewtopic.php?p=130797#130797
As you can see kumar00455 your advice doesn't work in my situation
any other help ??
Heath
Kumar
Thanks pal !
I've been able to sort out the problem. I actually needed to stop the Active Sync application on my PC so that the upgrade wizard could connect to the XDAIIs via USB and perform the update. It will not work if the Active Sync task is still running as a process.
After running the app again, the upgrade worked seamlessly without any glitch...!!!
Thanks for your support.
Ashraf
Phone model: Blue Angel
++++++++++++++++++++
After I've installed the new WM2k5_AKU3.2_32mb_v1.3.2, it
run the Extrom automatically.
Once I've achieved to GSM provider setting, the phone restarted
immdiately and hold in the white screen page.
After i've hard re-started the phone, no matter what I've done,
I can't run out the OS 2005 pocket PC even I've tried to press
the record and cam buttons or re-installed the WM2k5_AKU3.2_32mb_v1.3.2.
Pls. advise if you guys have kinds of solutions and experience.
Or Pls advise if any softwares can format the ROM data and re-install
the pocket PC 2005 or old version.
Pls. share and help!
Millions thanks, Martin!!!
how sad...
btw, have you tried hard resetting your device? Still has problem? I have experienced that kind of problem, my device stuck in either white screen or the 4 color stripes. but that was due to extended rom resizing, after hard reset, my device stuck in whitescreen.
So try downgrade ur rom to 2003se by using maupgradenoid.exe.
Try this, this method hard resets your device and fixes booting issues
It works!!! Thanks your help!!! Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
It works to me too....thanks a lot
My phone keeps freezing on this green windows mobile screen, and no matter how many times i reset nothing happens. I have to do a hard reset in order to get the phone working again. It happens often whenever i turn the phone off and on or change out the battery. Any idea? I am running the stock ATT rom, without the added junk (after i do i reset and it starts installing the extra apps i soft reset the phone). I installed the stock kaiser htc home plug in and thats about it.
i thinks its time for a new rom.
to keep it simple and basic =
http://www.america.htc.com/support/tilt/software-downloads.html
this happened to me just two days ago. phone froze up and wouldnt start. i had to do a hard reset.
hold both softkeys and use the stylus to reset the phone. (hole at the bottom of phone).
this will do a hard reset.
it sucks that you dont have a sprit back up of all your data. i have several checkpoints of my data. i suggest you do the same if you do decide to hard reset.
grandpareza said:
this happened to me just two days ago. phone froze up and wouldnt start. i had to do a hard reset.
hold both softkeys and use the stylus to reset the phone. (hole at the bottom of phone).
this will do a hard reset.
it sucks that you dont have a sprit back up of all your data. i have several checkpoints of my data. i suggest you do the same if you do decide to hard reset.
Click to expand...
Click to collapse
I do have backups, and it continues to happen. I finally just reinstalled all my apps today without restoring a backup to see if it helps but I doubt it.
Do you have HardSPL or have you changed your radio? Anything like that? Have you previously flashed other roms?
nope stock and stock. I did first notice this when I tried to use the kaiser tweak utility. but i have since never installed it
Did you upgrade from the original 1.57 at&t Rom to the recently released 1.62 at&t Rom?
If so are your restoring a backup from the 1.57 Rom onto the 1.62 Rom. That is a no-no....
Remove your SD card and do a soft reboot. If it still hangs, then it is a ROM issue. If it boots OK then there is a program on your SD card that the device is having problems with, in either linking to or opening.
Copy all the SD card files and programs on your PC. Format the SD card. Start installing the programs one at a time and see which program is the culprit. Remove it and all those that add to the problem.
If you were happy with the original ROM, then do not change to another.
kyphur said:
Did you upgrade from the original 1.57 at&t Rom to the recently released 1.62 at&t Rom?
If so are your restoring a backup from the 1.57 Rom onto the 1.62 Rom. That is a no-no....
Click to expand...
Click to collapse
Hey Kyphur.. good to see you here.. What else can you do to avoid keeping remnants of the previous ROM? How can you avoid restoring a back-up?.
asfoor said:
Hey Kyphur.. good to see you here.. What else can you do to avoid keeping remnants of the previous ROM? How can you avoid restoring a back-up?.
Click to expand...
Click to collapse
That's a loaded question. Personally I have the cab files for all of my programs on my storage card. I've consolidated some useful programs into a single cab and modified most cabs to install into a cleaner start menu structure.
Then I use KaiserTweak to set the few remaining Reg settings that I don't have already set in my cooked Rom.
My today plugins (PocketBreeze, PocketWeather & iLauncher) all have import/export functions so I use that so I don't have to reconfigure them every time.
Finally I have an Exchange Server account for my contacts and e-mails.
Hi, my Tilt can't auto reset for some reason.
Is this normal?
I have to manually press the soft reset button with the stylus every time
Thanks
are you talking about not auto resetting after installation of a cab or auto resetting in general. The tilt is NOT supposed to automatically reset itself out of the blue. It either needs to be program or user triggered.
Hi thesire
I'm talking about when a program tells it to reset. I hafve sprite backup on it and it says that it will reset before backup. The system turns off but doesn't reset. the only way to turn it back on is if you manually hit the reset button.
This is also the case for installing cabs as I will have to poke the reset manually because it doesn't to it itself
What ROM are you using? This happened with the HTC official 3.03.405.0 (Radio 1.64.06.04)
Oh I think Im using that rom
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
What rom should I flash to?
thanks
Same Problem
I have the same problem. I am currently on L26 diamond (Hybrid) v5.
Any Ideas???
Mobile Vista Seadragon by ansar
R 1.65.16.25
G 25.83.40.02H
D 3.34.0....
I have recently unlocked my tilt and I have ran into some weird issues
1. Cannot connect to Active Sync
2. Cannot install cab files (always unsuccessful)
3. Cannot delete rename or edit ANY files unless throught microsoft office.
4. Cannot hard reset or reach bootloader via hard keys. Hard reset makes the send screen come up but the phone key nor any other key works
All these probles came after I installed FingerKeyb-2.1-QVGA
Anyone know of a solution to revert back or reflash to any other rom. I am all out of guesses as to what has happened.
Thanks in advance
Cashflow said:
Mobile Vista Seadragon by ansar
R 1.65.16.25
G 25.83.40.02H
D 3.34.0....
I have recently unlocked my tilt and I have ran into some weird issues
1. Cannot connect to Active Sync
2. Cannot install cab files (always unsuccessful)
3. Cannot delete rename or edit ANY files unless throught microsoft office.
4. Cannot hard reset or reach bootloader via hard keys. Hard reset makes the send screen come up but the phone key nor any other key works
All these probles came after I installed FingerKeyb-2.1-QVGA
Anyone know of a solution to revert back or reflash to any other rom. I am all out of guesses as to what has happened.
Thanks in advance
Click to expand...
Click to collapse
Flash back to your stock and then a custom. Avoid then to install the program fingerkeyb
How will I flash back when Active sync will not connect?
EDIT: I connect the phone and it asks to active sync or internet share. I select active sync and then the phone loads active sync on the pc and then an error occurs. Sometimes saying "error" on the windows mobile device center and sometimes saying in so many words that the usb connection was not successful on my phone screen
Cashflow said:
How will I flash back when Active sync will not connect?
EDIT: I connect the phone and it asks to active sync or internet share. I select active sync and then the phone loads active sync on the pc and then an error occurs. Sometimes saying "error" on the windows mobile device center and sometimes saying in so many words that the usb connection was not successful on my phone screen
Click to expand...
Click to collapse
Flash via sdcard
OK... I will give that a go again when I study over the tutorial a little bit more. I have not been able to get to bootloader via the hard keys. It just boots back to the OS as if the keys are not pressed. I have made sure the power and camera buttons fuction while the OS is running but for some reason they act as if the are not mapped during the Hardreset procedure. Seems like I am stuck. The Bootloader.cab will not work because no .cab will install.
EDIT: As I figured... NOTHING.... Any more ideas... Thanks for the help so far.
Is there a way to "unpack" a .cab and maybe initiate it manually? That will provide an answer to my bootloader.cab and that will get me on track
Problem Solved: I installed the bootloader app from the Kaiser rom on the official site by using winrar and transfered the app to a microsd using another phone and then transfered the card to the Tilt and initiated bootloader. I should be safe to flash from here.