Related
Please help. I flashed 2.16.9.x and now ActiveSync doesn't work anymore, it connects all the time. PDA doesn't show activesync syncronization icon.
I tried to flash another versions of ROM, but it didn't help.
The problem may lie with the PC as opposed to the PDA. Have you tried a remove / re-install of AS4.1 on the PC?
Bebbo said:
The problem may lie with the PC as opposed to the PDA. Have you tried a remove / re-install of AS4.1 on the PC?
Click to expand...
Click to collapse
Of course I have. Even I tried on another computer.
vishny said:
Of course I have.
Click to expand...
Click to collapse
Fair enough, I was just trying to help. Perhaps if you had stated that in your original text I would not have provided such an "Obvious" answer. I will leave it up to others now to take guesses as to what you "might or might not have done"......
vishny said:
Please help. I flashed 2.16.9.x and now ActiveSync doesn't work anymore, it connects all the time. PDA doesn't show activesync syncronization icon.
I tried to flash another versions of ROM, but it didn't help.
Click to expand...
Click to collapse
Try to make your computer or laptop restore on earlier date then since it started. I had once this problem i don't know but sometimes it with the system files in computer missing then the problem occurs.
Although my ActiveSync works almost fine after the same rom-upgrade, I encounter its strange behaviour sometimes (rear, not always!) - PDA slows down to a crawl right after you disconnect it from a desktop PC (either USB or Bluetooth). It becomes so terribly slow that it takes 20-30 sec to draw the Comm-manager window! then you better soft-reset, then it works just fine. Why am I... to prove that ActiveSync 4.1 is not quite stable with new ROM version 2.16. There is a bug somewhere, and it has to be reported to i-Mate firmware writers.
Have you followed Microsoft rules about configuring firewalls for ActiveSync 4.1? Does it create a network connection 169.254.2.1 on a desktop PC?
Thank you guys, but I guess my case is harder:
1. I have firewall switched off. I didn't change any setting in computer. I just flashed new ROM.
2. I flashed my original ROM, but it didn't help.
3. I tried to sync on several computers and had the same result.
By the way I cannot return to original ipl/spl, I don't know how to do that.
Today I visited repairing service's office and they've prooved me my device is not broken, it synchronizes succesfully via USB on their computer. :shock:
So, the problem is related to my computer(s). If I'll find something I report in this thread.
it probably has to do with one of the cabs you installed that are on your original extrom or someone elses. Most people who have had problems after the upgrade on an 8125 (Cingular) have installed cingular cabs from the old rom. I had to to figure out the MMS configuration and after I foundthe one that did my activesync no longer worked. after a reflash and only installing some of the default cabs that came with the new rom and manually configuring the mms and gprs I don't have any problems at all.
well maybe it is the version of activesync we are using when this does happen.
I'm running the ROM that came with the Cingular 8125, and it does the same thing ... 1 in 10 times after disconnecting the device from the PC, the 8125 slows to a crawl, and the only way to recover is a soft-reset. 9 out of 10, it works fine.
OS ROM: 1.8.11.1 WWE
Radio: 01.09.11
Protocol: 4.0.13.20
not overclocked
soon to be ROM upgraded (hopefully)
ethorn said:
well maybe it is the version of activesync we are using when this does happen.
Click to expand...
Click to collapse
I use 4.1 for a long time.
I didn't install anything on my pda. It happens even after hard reset. I even tried to flash original rom. In all cases ActiveSync displays "Connecting...", pda even doesn't display sync icon.
I tried to sync with standalone notebook and it was successfull. I'm really shocked why pda cannot sync with my desktop(s). It seems to me it could happen after some windows unattendant updates or something, I'm still investigating...
I have Qtek 9100 and have installed rom 2.16.9 and i also have activesync 4.1 refusing connection to my pda. After some googling i have found this interesting site: http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x-connection.htm
I did cheks described there and found out that activesync doesnt have any network adapters and/or activity. USB driver installs, but it, again, doesnt generate anything. Maybe problem is there?
Ehhh... I even cannot return to any previous rom version, because there is no rapi for updaters to work with
reverting back to original cingular rom
How would you go back to original ROM using Lokiwiz tool if your active sync was working OK?
Thanks,
Each time I have done HARD RESET--I uninstalled active sync from my computer AFTER DELETING PARTNERSHIP. I deleted PC from Active sync on my 8125. I deleted all files on my computer related to active sync using search.
I then reinstalled active sync 4.1, being sure WINDOWS FIREWALL was off. I went thru all the steps with my TREND MICRO VIRUS PERSONAL FIREWALL EXCEPTIONS listed on http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
and I got it to work (1st install always takes time for calendar)
Hope that helps--it seems ridiculous to have redo all that-but so be it.
I'd like to know how to get back to CINGULAR ROM as I am still in 30 day return window.
Well there is a magical combination of buttons as described in http://forum.xda-developers.com/viewtopic.php?t=37386 (somewhere around 2-4 page):
Voice+Camera + Reset. Colored bootloader shows up. After that you can connect it to usb and run .exe with rom you want.
The problem with me is that i dont use any 3rd party firewall (i have hardware router for my connections)
reverting back to original cingular rom
You don't think there would be a problem going DOWN in ROM'S?
Do I need to UNLOCK again first?
I must confess. I did (i think veeery lucky) sucseded in running activesync. Altough what was the cause i cannot say. I reverted to 1.6.7 version of the rom. and reinstall everyting several times. and reboted several time. and i saying loud magical words. (and deleted checkpoint vpn software that i have installed). AND it worked!
Maybe trouble was in vpn soft, but it worked pre 4.1 activesync. So... Here is my experience.
Boki said:
I have Qtek 9100 and have installed rom 2.16.9 and i also have activesync 4.1 refusing connection to my pda. After some googling i have found this interesting site: http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x-connection.htm
I did cheks described there and found out that activesync doesnt have any network adapters and/or activity. USB driver installs, but it, again, doesnt generate anything. Maybe problem is there?
Ehhh... I even cannot return to any previous rom version, because there is no rapi for updaters to work with
Click to expand...
Click to collapse
Thank you very much for this link, it helped me to find the reason. It's not new ROM fault. The Microsoft Firewall Client (ISA 2000 component) on desktop blocks communication between PDA and desktop. I disabled it and now ActiveSync works fine.
Thank you again.
Your Are Welcome
Anyone know why logmein and gotomypc will not work on any cooked rom?
Everything seems to work fine on the stock att and htc rom. However, if I use any other rom (including dutty's) I can't login. It just asks me for my unsername and password and I cannot remote access my computer.
On the stock rom's I get a popup to download a file to make it work. On the cooked roms, the popup never comes and it just cycles back to the login screen.
I have tried it with both opera and PIE but both only work with the stock rom.
I love using other people's rom but this is a must have for me.
Any idea how to fix it?
logmein help
you need the attached file installed before you can use logmein from your pda.
file directly from LogMeIn
apposite said:
you need the attached file installed before you can use logmein from your pda.
file directly from LogMeIn
Click to expand...
Click to collapse
Thank you but does anyone know why PIE does not download the file automatically like it does with the stock rom?
With all these tech savy people, no one knows why?
argoldst said:
Anyone know why logmein and gotomypc will not work on any cooked rom?
Everything seems to work fine on the stock att and htc rom. However, if I use any other rom (including dutty's) I can't login. It just asks me for my unsername and password and I cannot remote access my computer.
On the stock rom's I get a popup to download a file to make it work. On the cooked roms, the popup never comes and it just cycles back to the login screen.
I have tried it with both opera and PIE but both only work with the stock rom.
I love using other people's rom but this is a must have for me.
Any idea how to fix it?
Click to expand...
Click to collapse
even with the cab installed this same thing happens to me. I have to click back and submit 5-50 times and then it will work. I think that it's the logmein website is broke. This only happens when logging in from a PDA.
i gots it 2 work!
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
the post above.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
kireol said:
even with the cab installed this same thing happens to me. I have to click back and submit 5-50 times and then it will work. I think that it's the logmein website is broke. This only happens when logging in from a PDA.
Click to expand...
Click to collapse
The Only sure fix is to use Iexplorer and before you start it run disable proxy cab each time and it will work every time.
Hi,
Been reading the posts and I can't seem to find anything relating to this exactly.
I had finally got outlook to sync with my work server when my admin man gave me a certificate to install on my TyTnII.
It worked a treat and then I decided to flash to HTC shipped ROM (I was on Orange - now unlocked too). It worked OK then too.
So I was brave and decided to give Dutty's ROM a go (Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2_). Didn't work after that. Re-installed the HTC ship ROM and it still doesn't work (installed the certificate on PPC OK).
I have un-installed ActiveSynce and deleted the partnership but still no joy.
Has something been written in the registry ??
Thanks
I have duttys non-cube version 19700 version cooked and am having no problems syncing.
I just install my chain/root certificate first, fill out the server name, user name and password. Its worked on every cooked rom i tried (and Ive tried alot).
One little detail though that tricked me up for a bit was that you cannot be hooked up with your usb cable to your pc when you try to sync over the air. When the USB to PC cable is plugged in the phone tries to use the pc to sync with which wont work if its from home.
Find the same issue with using wireless.
Also know that if the company created a self-signed certificate you have to load the root/chain certificate first, but if its a recognized 3rd party certificate (like verisign or digicert) you don't.
Dont expect the autodetect server function to work during the setup unless you have a internet host name set up as autodiscover.domain.com and have a certificate with that name as one of its alternate names. Otherwise just set it up manually.
.
Hard reset and installed the certificate and entered details on the PDA and it says:
Synchronization could not be completed. Tyr again later.
Support code 0x85010013
Haven't connected it to my PC so can't be an active sync/regisry entry..
gstechno said:
Hard reset and installed the certificate and entered details on the PDA and it says:
Synchronization could not be completed. Tyr again later.
Support code 0x85010013
Haven't connected it to my PC so can't be an active sync/regisry entry..
Click to expand...
Click to collapse
Do you have acces do the exchange server, you can have luck in the eventlog for a more detaileds
and which Exchange version is it ? 2003/2003sp2/2007sp1?
I can say for sure, its not your activesync, on EX2007 security policies can have a problem be forced on the device. 2003 can have an other problem. I will look for you if i get home.
I have fixed it. But I would like to know why Duttys won't work.
I now have
ROM 3.03.405.0 WWE (date 01/08/08 US)
Radio 1.64.06.04
Protocol Version 25.70.40.02H
Syncs up a treat, but I would like to put Duttys back on. Any ideas or suggestions?
The admin guy said nothing had changed on the server and there were no logs
Sorry man, i totally forgot about you
But I tried a lot of roms, but i had never problems with my syncing same as Tayton. But how did you fix it? Just flash to an orginal Rom?
Sorry about the logs i was not clear enough. The admin can see if somebody is connecting with his device, and then you have some more details for exploring the problem. Most of the time errors from the PDA are to general.
Btw here is a link for more details about the error:
http://www.shijaz.com/exchange/activesync_errors.htm
Hi, I flashed this new 2.32 ROM (my own build) without any problem, but there is ActiveSync permanently running. I try many ways to disable it, but no success, it starts after while again. So is there any way how to disable it? I went back to previous 1.40 ROM version, where this problem doesn't exist... ActiveSync in this version starts only when Jade is connected to PC via ActiveSync... Thanx
Alekss_UH said:
Hi, I flashed this new 2.32 ROM (my own build) without any problem, but there is ActiveSync permanently running. I try many ways to disable it, but no success, it starts after while again. So is there any way how to disable it? I went back to previous 1.40 ROM version, where this problem doesn't exist... ActiveSync in this version starts only when Jade is connected to PC via ActiveSync... Thanx
Click to expand...
Click to collapse
try these solutions, maybe they will work
http://forum.xda-developers.com/showthread.php?t=463013&highlight=active+sync
http://forum.xda-developers.com/showpost.php?p=2135727&postcount=1
good luck
excellent, the first link worked pretty well, activesync defeated!
The only thing is that automatically will create a welcome mail in the outlook inbox and apparently it is not anywhere. Look for that inbox and delete it.
Thanks
Franco
What i know
1. this cant be changed using Registry
2. this cant be changed using any of the Start > System > Device Info
3. i have tried this http: //www.silentservices.de/HexEdit-ROM-for-BBC.html
the thing is , in example they try to change HTC-Rhodium into HTC-Raphael ... well they have the same amount of character, so no problem for them, but in my case, (using the R3A ROM), SEMC-X1 cant be changed to HTC-Raphael without adding more bytes in it (you can try it if you want)
is there any other way?
The Reason for this hassle
1. BB Connect works perfectly for me
2. now i found out Blackberry Application Suite in http: //forum.xda-developers.com/showthread.php?t=626456
well that BAS wont install on my device because it detected "SEMC-X1" as my model id, and it simply wont install
Please help
Thanks a lot
I don't have suggestions, but I am curious, what advantages do you get by using BB Connect of BB Application Suite? Is there any gained functionality over what WM offers by default?
BlackBerryMessenger is one thing
to be connected to all of my friend that used BBM
other then that, i can easily access the push email and internet using BBConnect instead of BAS
but then, when i used BBConnect, i cant use MSN and any other messenger
well , i am hopeful that by using BAS, i can rid of that limitation
Hi M4G1C14N, I'm trying to find out as well, I'll post if my search is fruitful, please share if you find some way to do it as well..
Thanks
M4G1C14N said:
What i know
1. this cant be changed using Registry
2. this cant be changed using any of the Start > System > Device Info
3. i have tried this http: //www.silentservices.de/HexEdit-ROM-for-BBC.html
the thing is , in example they try to change HTC-Rhodium into HTC-Raphael ... well they have the same amount of character, so no problem for them, but in my case, (using the R3A ROM), SEMC-X1 cant be changed to HTC-Raphael without adding more bytes in it (you can try it if you want)
is there any other way?
The Reason for this hassle
1. BB Connect works perfectly for me
2. now i found out Blackberry Application Suite in http: //forum.xda-developers.com/showthread.php?t=626456
well that BAS wont install on my device because it detected "SEMC-X1" as my model id, and it simply wont install
Please help
Thanks a lot
Click to expand...
Click to collapse
Hello,
can you be more concrete? What do you want to do exactly?
Maybe i can help.
Let me know
Shazad.K said:
Hello,
can you be more concrete? What do you want to do exactly?
Maybe i can help.
Let me know
Click to expand...
Click to collapse
Hi Shazad, if you take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=632147
They have managed to extract BlackBerry application suite(Full BB on WinMo), however it only works on HTC-Raphael, the Installation program and the application itself will check before starting for modelId, which in the X1's case is HTC-Kovsky (or in his case SEMC-X1). Regardless of the name, how can this modelId be changed.
In some of the threads they use a utility called SetModelId.exe, however that doesn't work on the X1.
You can check this post as well:
http://forum.xda-developers.com/show...&postcount=117
M4G1C14N said:
BlackBerryMessenger is one thing
to be connected to all of my friend that used BBM
other then that, i can easily access the push email and internet using BBConnect instead of BAS
but then, when i used BBConnect, i cant use MSN and any other messenger
well , i am hopeful that by using BAS, i can rid of that limitation
Click to expand...
Click to collapse
Why could you not use MSN while using BBC? Try to search for Multi APN connection that solve it for me I would love to have full bb on my x1 as well or at least i would love to use BBC on a cooked ROM, thats why i'd like to know the answer for your question as well.
I found something, search for 'hex editor blackberry connect' and hit the 1st link it'll give you. The method described there is way too dificult and time consuming for me :/
Anyone can run the BB app suit in x1 yet?
BBC works great in X1.. I think BAS would working greatly to in it.. we need SetModelId.exe, for Xperia X1
zelduy said:
Anyone can run the BB app suit in x1 yet?
BBC works great in X1.. I think BAS would working greatly to in it.. we need SetModelId.exe, for Xperia X1
Click to expand...
Click to collapse
BTW did you get BBC working on a coocked ROM on x1? (6.5.x etc
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
M4G1C14N said:
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
Click to expand...
Click to collapse
you can install BAS in X1??
M4G1C14N said:
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
Click to expand...
Click to collapse
Of course i've tried that but with no success i gave up when i had on like 10th try of different combinations always HEMC-X1 instead of SEMC-X1 in BBC. Also i found HTC-Kovsky there twice, which one do you usualy changing to get BBC working? 1st one or the 2nd one? From your link i can see that you've change it for HTC-Raphael - that works with BBC? - This might be the solution for my hassle.
HTC-Raphael is needed to install BlackBerry Application Suite which is not working :|
you can install R3A ROM from X1, it already has SEMC-X1
Oh and dont forget to subscribe for BlackBerry Internet Service Data Plan (it wont work without this)
I've been using BIS for long time. what i wanted was to use a rom with htc sence in it but all of them which are available has got HTC-Kovsky as ModelID. It would be great if you can tell me how exactly you change HTC-Kovsky to SEMC-X1 when you say it is easy. On which ofset have you made the changes? Did you change both entries or just a one? Whic one then? I've tried that usong the hex editor but the best i could get was HEMC-X1. Please man if its easy for you then tell me thanx. S.
you can change HTC-Kovsky to HTC-Raphael, then change AKU to .1.6.3
I use this method for 4 months, and it works very well for me over BBC.106
please, me to want to use bbconnect on my customized agent47 rom. Can someone explain step by step how to?
cq0dq said:
you can change HTC-Kovsky to HTC-Raphael, then change AKU to .1.6.3
I use this method for 4 months, and it works very well for me over BBC.106
Click to expand...
Click to collapse
This worked mate. Thanks a lot
M4G1C14N said:
HTC-Raphael is needed to install BlackBerry Application Suite which is not working :|
you can install R3A ROM from X1, it already has SEMC-X1
Oh and dont forget to subscribe for BlackBerry Internet Service Data Plan (it wont work without this)
Click to expand...
Click to collapse
I've done it as above... (changed my model ID from HTC-Kovsky to HTC-Raphael.) ...and Blackberry Connect works, have 'Security died unexpecty' sometimes after reboot, but battery pull sorts this out. I'll try to install BAS when i have a time and let you know how was it...
l0rdsheva said:
please, me to want to use bbconnect on my customized agent47 rom. Can someone explain step by step how to?
Click to expand...
Click to collapse
Check the 1st post of this thread, for BB Connect the ModelID has to be SEMC-X1 (original ROMs) or HTC-Raphael (your custom ROM will have probably HTC-Kovsky as its ModelID so you have to use the HexEditor from the 1st post to change it to HTC-Raphael, i've done it and it works) also don't forget to change the AKU to 1.6.3 when using custom ROMs (i did not have to change it when using original latest ROM and i did not check its version as BBC was working straight away) you can find it in registry (use a registry editor, i use the plugin in Total Commander) HKLM/System/Versions/Aku - just change the value from whatever is there to .1.6.3
When using BBConnect than you'll probably need to use multiple APN connection to be able to use BBC in the same time as other aplications which requires a internet connection (internet, IM, Weather or GPS updating etc..) For this check this one:forum.xda-developers.com/showpost.php?p=2382465&postcount=37
ok, changed device name and now flashing, hope it'll run! thanks in advance!