nothing is happening.
spl is 4.10 so i'm ok
i installed 3 cabs in order
i soft reseted
i ran ruugetinfo.exe
thats it? nothing happened, no white screen? what did i do wrong?
alright, i finally poked around and clicked on the "enterbootloader.exe" and i have the white screen. i'm hanging on
ok i had the white screen for 20 mins before i decided to abort. i soft reseted and now im back to normal, nothing has changed. i messed up somehow. atleast my phone is working though
usually you dont have to point nothing bcoz if ur cab installation was fine, all process are executed without your permission. But, if it ask for something, maybe you should check CAB installation (like reinstall it again, on phone memory)
all is ok!!!!!
after reading for 30 mins, i found others that were having the same problem. i was looking for an RUU.exe not knowing that it was an acronym RomUpdateUtitlty.exe. worked like a charm and i am now hard as a rock!!
thanks
Related
Hi there folks. Appreciate you having a look here, and bear with me while I try to explain everything as I am unsure what on earth is wrong with my phone.
Firstly, I have read pretty much everything that the wiki and stickies and various other posts have pointed me to before making this post, so I am going to utterly hate myself if you guys point me in the correct direction within a couple minutes. I don't think that will happen, but none the less!
Secondly, as the title says, I am running a UK HTC TyTN II with boot SPL 1.81.0000. I have Radio 1.27.14.35.
I only got my phone on Weds of last week. After reading various bits, I tried installing HardSPL, and got the white screen of death. I didnt have time at that time to find the answer, but have subsiquently located it. Shortly after that I located and installed KaiserTweak, and then Resco explorer. Now, both these programs were installed, but I made no changes to anything with them.
After a little bit of searching I found the white screen fix. Great I thought! So went ahead and downloaded the files and stuck them on my PDA. When I tried to run them, they would not run. The error tells me that they are not signed or corrupt.
Ok, so I thought I would try and fix the signiture issue as that is most likely the problem. So I try to run KaiserTweak. No joy. I try to run Resco. No joy. Neither program will do anything. Next I try to re-install either of these. Nothing. Wont work. Either tells me the same thing as the SPLs do (invalid signiture or corrupt) in the case of KaiserTweak, or tells me the installs have failed in the case of Resco.
Now I have tried to install anything and everything since this, and not one thing will install. Nothing. It wont let me change anything or get to anything. I have tried hard resetting the phone, nothing changes. The phone still acts like it did the day I bought it, and as most Orange users will know, they have destroyed any useful software that HTC has used in order to rebrand it with their OS. I would dearly love to get another cab on there, but I am at a loss as to figure out how to get past this stuck phone?!
Any help would be greatly appreciated.
Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
GLO said:
Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
Click to expand...
Click to collapse
First thing in such cases is a hardreset.
Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups.
Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups
Click to expand...
Click to collapse
Some software or setting you've done, or it was simply Murphys Law:
When the mistake could happen, it will happen
Should i upgrade the radio at this point?
Its like with PCs, u need to reinstall your operation system from time to time.
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
CLF said:
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
Click to expand...
Click to collapse
Hi:
You can go into start/settings/system/clear storage. That will hard reset your device.
EDIT: Oops, sorry I missed your last line. Please disregard my post
Sorry my english, but I'm brasilian and the touch screen stop work
and I can not run anything...
I tryed to install hardspl, but do not work...(I did the hard reset, and tryed vol.down/reset too, but)
now, it's blocked in the "align screnn" mode, but don't walk...
Please...any suggestion??:
I have exactly the same problem.I 'm thinking i will go to sent it for to repair because i haven't see the tips for to resolve this problem.
how many times did you try to align the screen or does that not even work? i remember when i first flashed hardspl it kept resetting to the align screen after i aligned it (did it about 10 times) until i took battery out and then tried again and it worked fine!
More than 20 times )-:
i searched and could not find anything about this issue.
i'm stuck at the startup screen where it shows the radio, rom versions in the lower right corner.
soft reset returns it to the same place, and holding down the power does nothing. removing the battery does nothing. and i'm physically unable to do a hard reset. http://forum.xda-developers.com/showthread.php?t=413976
what can i do? i have hardspl 1.40, new radio and flashed one of the roms here. it was working for a while, then i installed a bunch of cabs, and unsuccessfully tried to hard reset about 25 times (i had 2 internal storage folders for some reason and i wanted to clean it up), gave up on hard reset, did a a memory cleanup by settings-clean memory-1234 way, soft reset several times while reinstalling cabs again and now it gets stuck at the screen...
fixed by going into bootloader manually and flashing the same rom again. it works now. but i'm going with another rom.
all was fine, then i installed the touch diamond 2 keyboard and didn't like the one with the arrows so i uninstalled and this same problem came up again. the last i suspected that was the cause too so this is just so it's documented that uninstalling the TD 2 keyboards causes this problem.
hard reset and putting all my settings again, oh joy....
Hi guys,
I've got a bit of a problem with my friends X1...
A while ago I updated my X1 to WM6.5 and it works perfect...
But last week my friend asked me to update her phone as well, so I did
Now here's the problem:
After updating, the phone got stuck on loading, it didn't even get past the SE screen...
Turned it on and off for a couple of times, soft reset, hard reset, nothing worked...
I was still able to get the phone in the tri-colour screen, so I did, and I installed a stripped down version of WM6.5
And it worked!
But this afternoon she called me up to say that the phone was having problems again.
She often can't turn it on, and when she can it seems as if it has lost all of its memory again, comletely blank as if you just got it out of the box... (So you have to setup your screen again, the time and date etc...)
I did it exactly as id did mine, and mine still works perfect...
What could have gone wrong?
First I put Hard-SPL on the device.
Then I used the rom update utility from christian-web.nl/sections.php?section=Xperia_rom (I used version 3.810)
And thats it!
Does somebody have any idea what could be the problem?
Thanks,
Rob
A few days back I read somewhat of the same story, about the phone hard resetting by itself. Can't recall where, but it was somewhere in the Xperia section of this forum.
Did you do a hard reset after flash? Or maybe task29 before flashing her phone?
Try the hard reset first and see if that helps.