Database Develop

Help with WIFI on TILT

After i have installed L26_Kaiser_DIAMONDV9, hardSPL 3.56 and radio kaiser 1.65.20.29....
my WIFI will not work. I can turn it on but then it will turn off by it self in few second. Please help.. what i ahve done wrong .. anyone please do help.. thanks in advance...

I just flashed the same rom today and don't have this problem. This rom comes with radio 1.58.25.17...if you have a different radio that's likely the problem. I'd recommend flashing the correct radio and see if that fixes it.

kaiser stuck on tri screen is it a brick???

i hope this is where i should post this.
whilst using my phone it froze,so soft reset was done then it went into tri screen
my kaiser wont go out of tri screen.i have this on screen.
kais130 mfg
spl-1.0.olipof
cpld-8
after trying hard reset and soft reset it wont pass this screen,it loads straight back to bootloader mode.i had duttys 6.1 rom on and nikis radio.
is there a solution to this problem.all was fine until this.ive searched all over for the past week and i cant seem to find a solution,so a little help is called for.id appreciate any help if possable and thank you in advance

Are you sure that your camera-button isn't stuck? Try pushing it hard few times, and then boot again.

Try flashing an official rom onto it while on that screen?

hi tried new rom and camera button isnt stuck,it seems like theres something wrong with spl-1.0.olipof.after installing new rom it boots straight to tri screen.can olipro be tacken off.just thinking of other things to revert to normal.when soft reset done it goes straight to tri screen

Try HardSPL
Why not flash it with a different SPL - like any of the HardSPLs such as Jocks:
http://forum.xda-developers.com/showthread.php?t=396922
and then flash with a new rom, suitable to that SPL?
rgds, MN

Fyi, this issue is being discussed in lots of threads @ ROM Development... I do have the same problem.
http://forum.xda-developers.com/showthread.php?t=402562
http://forum.xda-developers.com/showthread.php?t=371154&page=9
... and this one being the most recently updated:
http://forum.xda-developers.com/showthread.php?t=393337&page=29

Just to point out that the problem is solved (I think) - read here -> http://forum.xda-developers.com/showthread.php?p=2415437#post2415437

Flickering screen after ROM update

I recently upgraded to the official 1.93 WWE ROM (and new hard SPL), and now my screen flickers a lot when the phone is switched on. (The flickering starts at boot-up when the red writing appears at the bottom-right of the screen).
I have been able to solve it so far by pressing the power button twice to switch the display off and back on again, but wondered if anyone else had experienced this and could suggest a more permanent fix?
Thanks,
Neil

Most likely who hasnt experienced this.....lol
Anyway, when you get this after a reset, just turn on and off the display and all goes back to normal.

You need to flash another hard spl. The issue is caused by an outdated spl not being compatible to your lcd screen. Try hard spl 1.37 found here:
http://forum.xda-developers.com/showthread.php?t=400950

I want to flash
_QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
to my UK Vodafone Diamond which has SPL 1.37 from the factory.
Which Hard SPL should I use - 1.37? Signed or unsigned?

djvw said:
You need to flash another hard spl. The issue is caused by an outdated spl not being compatible to your lcd screen. Try hard spl 1.37 found here:
http://forum.xda-developers.com/showthread.php?t=400950
Click to expand...
Click to collapse
Thanks! I tried searching for "flicker", but got too many results and didn't find that thread.

i have the flickering screen too, i want to try this method but my activesync does not work. i try a hard-reset and now the device ask me to insert Getting STarted Disc to install synchronization software which I did. it still doesn't work. anyway to do this?
Thanks

i have the same problem i flashed the 1.93 hard SPL and still nothin... anyone know the problem?

i did managed to get the flikering out... flashed hard spl 1.38!

I want to try flash HardSPL but my USB port doesn't work, is there anyway to do this?

Trembling display after installing HARD SPL

Hi all!
I have a HTC DIAMOND (no BRAND) with the last official ITALIAN rom. Today I have tried to install the Hard SPL 1.24 (the original one was the 2.03.0000) . The hard spl installed succesfully, but when I rebooted the device i have noticed a kind of tremble on the display. What happened? How can I reinstall the original Hard SPL? Thanks in advance

Hi. I don't know if this might help, but I have the latest official ROM for Europe, which is a bit older than your's, I think, and I had to install HardSPL Olinex. I had screen flicks, but it was from the Flash Player 7. After unninstall, it became regular, altough it still flicks sometimes while booting.
Hope it helps...

messed up my HD please help

I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me

k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?

i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore

can somebody help me I just wanna know how i set back to standard rom or what you call it

the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers

yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.

Read this:
http://forum.xda-developers.com/showthread.php?t=505377

great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%

k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.

k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..

i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading

Has this been resolved? Or do you still require help?

still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone

k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?

flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out

k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms

i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip

k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?

it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S

..........