Hi, I know there is lot of threads about screen protector, but I have noob problem. Which is the screen protector? I mean, in a box, there are 2 things. One covers even top of the phone - there are holes for camera and headphone, and the second one is just for display. I know, that with Diamond is boxed only one screen protector, so, which one isthe screen protector and what is that other one foil for?
Well the one tht is already on the Diamond when u first unbox it is only fer display but the ones with holes fer the camera and the earpiece is the screen protector....
OK, so and doesent matter that on the foil with the holes for earpiece and camera isnt any glue? Or somethink to apply it? I have never done this before.
pokevitek said:
OK, so and doesent matter that on the foil with the holes for earpiece and camera isnt any glue? Or somethink to apply it? I have never done this before.
Click to expand...
Click to collapse
No glue required pal. Make sure screen is nice and clean that put it on nice and straight/
I had another one foil, a bag with label anti-relfection cover in package. What is thia for?
Hmm isn't it time for a retard exam before you may touch a mobile phone!? my gawd
Dont be rude. I heard that in Diamond packakage is only one protector, but I had in my box two foils, one only on display, and the second one for display and around front camera, there is a hole for it. So, I know that foil that was on the device is just for transport, but I have another two different fils, but there should be just ONE! So i am naturally asking which one is it, and for what is that otherone. OK?
pokevitek said:
Dont be rude. I heard that in Diamond packakage is only one protector, but I had in my box two foils, one only on display, and the second one for display and around front camera, there is a hole for it. So, I know that foil that was on the device is just for transport, but I have another two different fils, but there should be just ONE! So i am naturally asking which one is it, and for what is that otherone. OK?
Click to expand...
Click to collapse
When they say clean, they mean clean with isopropanol and a piece of tape to pick up small dusty stuff from the screen, before you apply the protector to the screen.
Related
So some inconsiderate person at work just picks up my phone without asking, and runs her broke-ass fingernails across the screen, BAM! instantly two fine hairline scratches right through the middle, all the way across. ARGG! Is there anyway I can buff these out, or get a new plastic screen?
Scratches...
Always use a screen protector... and don't let women touch your device - women and technology don't mix! (Only joking ladies ).
I found this on eBay - it's really good stuff.
Displex
Hope this helps.
It's probably a little too late, but a screen protector is always a good idea! Once you find out how to get it fixed, I highly recommend using one.
Well, it worked for mine but i still say test, do this:
- Toothpaste, it can be used to sand things with, like shiny plastics
- now, before you put half a tube on it, it would be safer to test first, take a little bit of toothpaste on your finger, little bit of water, mix between 2 fingers, then in circles rub a small corner of your screen, for a few minutes
- if it doesnt get less shiny, you can go rub circles over the scratch, once again a little toothpaste and a little drop of water to mix toothpaste with (makes it easyer to rub bscly)
The above got a nasty (unfortunatlly deep) scratch to be almost invisible when using device (cuz its deep u can still see it when the device is off) on my htc touch diamond, wich i caused the second day i got the device, by having the diamond and its headphones in the same pocket
The mentioned displex is a paste somewhere in between toothpaste and silver-cleaner-stuff, it would most likelly work better then my trick, but hey, maybe you can save yourself a few quids by getting the scratches off for 'free' (assuming you have toothpaste already) i do still advice you to even when you get displex test on a tiny part of a corner first, theres a whole lot of different plastics on phones. you can pick displex up at those phone stores that work with several contracters (orange tmobile etc)
This topic reminded me i didnt try with displex yet btw
Edit:
Another thing, screen protectors kinda suck on touch devices, since it reduces the capability to detect touch, always.
Didn't HTC state somewhere that it was amazing scratch proof glass and screen protector was only included out of habit?
suicidal.banana said:
.......
The mentioned displex is a paste somewhere in between toothpaste and silver-cleaner-stuff, it would most likelly work better then my trick, but hey, maybe you can save yourself a few quids by getting the scratches off for 'free' (assuming you have toothpaste already) i do still advice you to even when you get displex test on a tiny part of a corner first, theres a whole lot of different plastics on phones. you can pick displex up at those phone stores that work with several contracters (orange tmobile etc)
This topic reminded me i didnt try with displex yet btw
Edit:
Another thing, screen protectors kinda suck on touch devices, since it reduces the capability to detect touch, always.
Didn't HTC state somewhere that it was amazing scratch proof glass and screen protector was only included out of habit?
Click to expand...
Click to collapse
Displex is really awesome! Some ime ago i bought it for fixing my Laptop-Screen and even there (on an ASUS Crystal Display) it worked perfectly!
The only negative thing about Displex in my opinion is, that if you are using it too often, the screen will become kinda "unshiny" just like after polishing a car too much.... i noticed that after i used it several times to fix my Samsung D900 Screen
And regarding the screen protector delivered with the devide... I think it is a really good thing! I attached it to my Diamond after one week and didn't notice any differences... it even worked better when using the fingers to tap the screen.
Good advice here....tooth paste is good for removing most of a deep scratch BUT test first....
Displex to get the fine stuff....I would still test this as well, VERY CAREFULLY of course!!
Try this..
http://forum.xda-developers.com/showthread.php?t=415933
please search before you post...
Do not use toothpaste unless you test it first. Different toothpastes use different size grit. You may end up causing more problems.
To polish plastics, I use jeweller's rouge. Just rub some on a clean cloth and work away. It's slow but there's les chance of screwing things up.
If it's only a couple of fine scratches that are difficult to see, then leave it. Polishing will change the surface texture so you will need to polish the entire surface, not only the area of the scratches. It's doubtful that you'll find anything to match the original surface.
Hello folks,
As most of you reading I am a happy Topaz user,
But I find it sad, that I almost do not dare to use the device without stylus
Whenever I touch the phone, it leaves a dirty mark...
And I cannot live with that, So I always want to clean it afterwards
I mean... even with a screen protector installed, it gets dirty too quick,
And I recon I cannot walk around with a bunch of cleaning tools either
So, what's your opinion on this? or do you have a good solution?
Do you care that the screen is dirty, or not? please tell me
Thanks already
- Jeutie
is ok , you can always change screen protector .
jeutie said:
... I almost do not dare to use the device without stylus
Whenever I touch the phone, it leaves a dirty mark...
Click to expand...
Click to collapse
I use an antiglare screen protector I got from Brando (http://shop.brando.com.hk/bw-pda-screen-protector-htc-touch-diamond-2-_p03225c1035d039.html). You lose something in brightness but it is very impervious to dirt and fingerprints.
There is also an hot debate on matte finishing battery cover. I simply painted the original cover using matte spray acrylic paint (http://forum.xda-developers.com/showpost.php?p=3950791&postcount=67) Of course you need a bit of manual dexterity and a brave heart...
I just leave it dirty
I thought about another screen protector aswell... but I think I'll fail again xD
(screen protector was dusty already when I putted it on, But I'll try again.)
Thanks for the information
But Would you recommend the normal screen protector or the Ultra Clear one?
Hi
Yep feel the same, hated touching it when I first got it as any touch leaves a fingerprint, if you try and wipe it away you make it worse. The aluminium surround really shows up finger prints and then smudges and so does the screen even with screen protector on. Even ear prints are clearly visible!
This isn't unique to the Topaz though, the state I've seen some iPhones in
So I just live with the fact it only looks shiny and new after a quick clean with some cleaner and a microfibre cloth, for just a short period of time.
It would help if the back was matt black or rubberised, but it isn't. I really don't understand the people that design these things as surely they must put them through some form of user testing, and I can't believe out of an even tiny group of testers the comment 'finger print magnet' didn't arise.
Regards
Phil
I do have the matt finish ;-) bought it way overpriced on ebay...
But the screen protector didn't help so I was looking for something better
and indeed, the aluminium is even worse xD
jeutie said:
But Would you recommend the normal screen protector or the Ultra Clear one?
Click to expand...
Click to collapse
The Ultra Clear looks and feels as the original screen and as other screen protectors, that is glass like. Therefore, dirt and fingerprints remain very visible.
On the other hand the antiglare has a kind of very small granularity over it. Dirt and fingerprints do not stick to it and fingers, nails and stylus glide very nicely over it. On the other hand, it is not completely transparent, expecially under direct sunlight.
But so, for the fingerprint issue, the normal one should be better, then the ultra clear one, Thanks
I'll order one on Monday, And I'll get someone less clumsy to put it on ^^
PhilipL said:
'finger print magnet'
Click to expand...
Click to collapse
That's a PERFECT DEFINITION! My opinion is that being a "touch" device, we have no great chances to solve the problem on what concerns the screen..Other question is the backVery sexy on picture but fingerprint hungry and sometimes slippy!! Waiting for a mat cover at decent price.BTW congrats to ouram57 for his guts! But is the painting layer resisting,especially at the corners?
sualc said:
BTW congrats to ouram57 for his guts!
Click to expand...
Click to collapse
Well, after all I could always buy a new cover (http://www.expansys.com/d.aspx?i=179389).
sualc said:
But is the painting layer resisting,especially at the corners?
Click to expand...
Click to collapse
The painting is quite resistant but of course scratches accumulate as they did on the shiny original case (but they are a bit less visible). The good news is that on too many scratches paint can be applied again...
You're right! If it's been successfully done once, why not repeat it if needed..
Hoping that none of us will ever need it,http://www.expansys.com/d.aspx?i=179389 is one of the most expensive pieces of plastic on earth
sualc said:
You're right! If it's been successfully done once, why not repeat it if needed..
Hoping that none of us will ever need it,http://www.expansys.com/d.aspx?i=179389 is one of the most expensive pieces of plastic on earth
Click to expand...
Click to collapse
...especially as its not for the TD2, check it out, it has 2 holes at the top and a diamond back!?!
TD1 maybe ???
That "thing" with two holes is also on sale at HTC's:http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179389 as "original" cover for D2Very affordable as usual.. I get mad if I think it's about 10% of the phone's price. My ideal back cover would be mat gummy black, just like the Kaiser (a.k.a TytnII).. hope someone is going to think about it!
Aright... I have applied the screen protector...
That's great! no more fingerprints on the screen
Together with the backcover and installation of some cabs... my device is totally like I want it
Thanks folks!
First off, hi guys - new HD2 (Leo) owner here and have to say I love it!!
Anyway, thought I'd just say something about this product. It's rubbish...
Poor fit, didn't stick properly and bubbles galore - stay well clear of it IMO
Anyway, will be lingering about as still getting my head about WinMo and the various ROMs about - still running stock 1.48 ROM out the box but it's an awesome phone and definitely glad I got it...
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
ClownShoes said:
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
Click to expand...
Click to collapse
Did yours come with a screen protector in the box? I didn't see one in mine but I may have overlooked it, or different packaging in Asia. So tomorrow I'm on a hunt to find one.
I dont recal there being one in mine either. Hmm maybe i should look alittle harder.
Maybe they ordered the original OEM ones from HTC as a side-order!?
I did, and mine are in the mail.
Should arrive tomorrow...
Hope they are not as bad as stated in this post...
Will be sure to comment on it here when I get them
Yeah, bought mine from the HTC Shop - didn't get any in the box...
Ordered mine too... complete waste of money
I got the official ones too, I thought it was me just fitting it badly as it didn't seem to fit the screen and had bubbles. I couldn't get it to sick below the buttons either. It had to come off. I got another one from Amazon and it now fits as I would expect it to.
I would not recommend the official protector from HTC, sorry.
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Why would you need to have a screen protector......
If you guys have been hiding under your bed sheets then its time to wake up.
Leo, AKA HD2 had a scratch resistant glass and not a cheap plastic face.
Just have a look at the following link and you will agree....
http://www.youtube.com/watch?v=NcEaehKWr2s
you need guts to do it, but i didnt have the guts to do that.
But atleast the screen protector is not needed.
Of course a screen protector is needed. It may be made of glass, but it's not bullet proof glass!
EddyOS said:
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Click to expand...
Click to collapse
http://www.amazon.co.uk/exec/obidos/ASIN/B002Y33M4W/ref=ox_ya_oh_product
This is the one I went for from Amazon. Fits much better than the official HTC one as it sits just slightly within the screen profile rather than exactly the same size. I have a 100% fix now.
But as one of the posts above points out, we shouldn't really need a protector on it because it is scratch resistant, but I go for peace of mind.
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
petexx said:
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
Click to expand...
Click to collapse
Completely aggree with you. I also waste 3 of them. finally a give up!
Not recomended!
My HTC screen-protectors arrived today...
And I have to admit, I didn't really believe the people writing about how bad they were.
But I have to aggree, what a piece of s***!
I got 2 in the pack, and the first one messed up on a biblical level for me.
The second one actually seemed to fit as intended, but I just couldn't get the corner to fit right...
I got away with no bubbles underneath, but the damn corner just couldn't fit.
We're talking a matter of milimeters here...
Stay away from them, like everyone else is saying
I'll join the chorus.
I ordered a pack of 2, and quickly noticed that they're very different from the (actually quite OK) HTC HD protectors.
The adhesive side seems to attract small particles from the air within seconds. Just one such small particle produces an ugly bubble. I don't want to be seen with such bubbles. My wife would call be "Bubble Boy".
Since the adhesive is quite strong, it's impossible to make minute adjustments the moment a part of the protector touches the glass. This is compounded by the exact measurements - even when I thought it fit wonderfully on one end of the screen, the other end collided with the screen bezel, making it a bust.
The protector is also very thin and flexible, so it is almost impossible to hold without bending and getting fingerprints underneath, further ruining its appearance.
This product should be retracted from the market. I completely understand why the HD2 doesn't come bundled with these protectors:
1. they're practically impossible to fit
2. the HD2's glass doesn't really need it
I'll live hard and fast, without protection.
What for?
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
skippinshanghai said:
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
Click to expand...
Click to collapse
I don't see how applying a screen protector that's probably less than 0.5mm thick will ruin the look of the device.
Its about personal choice
Screen protector or no screen protector? Condom or no condom? Safety glasses or no safety glasses? Its a matter of choice linked to a a personal assessment of risk, cost and benefit.
I always use one........
WB
fz9999 said:
Of course a screen protector is needed.
Click to expand...
Click to collapse
It's not "needed". It's scratch resistant glass - we have discussed this here before. It's the same type of glass you get with better watches. Do you use them with a protector? If you "want" damage the glass you can do this with force, but then a screen protector wouldn't help neither.
Hello guys
to sum it up i have the Xperia Z in black. I have a sticker on it covering everything except the black lines on the sides of the phone on each side of the flaps. So the bits where it is black rubbery plastic. So i had the phone in my jacket like an idiot and normally i have a pocket i keep the phone in ususally. However yestarday i had forgotten the pocket and was carrying the phone in my jacket when i decided to take off my headset and by doing that forgot to zip up the jacket and the phone fell off top first onto concrete.
Phone works perfectly screen or any glass is not damaged at all the only damage were 2 small dents on both sides of the top of the phone. So the rubbery plastic top righ. One is near the music jack and the other one above the USB port.
So my question is since i screwed it up warranty is obviously bull****. My q is would there be any way to repair this. As in paint marker or anything that might cover it up? (except for a backplate protector or snap in ) hate all of those.
Obviously goes without saying all help would greaty be appreciated and used to reinstate my inner tranquility.
Best Regards
Shallowmist
Shallowmist said:
Hello guys
to sum it up i have the Xperia Z in black. I have a sticker on it covering everything except the black lines on the sides of the phone on each side of the flaps. So the bits where it is black rubbery plastic. So i had the phone in my jacket like an idiot and normally i have a pocket i keep the phone in ususally. However yestarday i had forgotten the pocket and was carrying the phone in my jacket when i decided to take off my headset and by doing that forgot to zip up the jacket and the phone fell off top first onto concrete.
Phone works perfectly screen or any glass is not damaged at all the only damage were 2 small dents on both sides of the top of the phone. So the rubbery plastic top righ. One is near the music jack and the other one above the USB port.
So my question is since i screwed it up warranty is obviously bull****. My q is would there be any way to repair this. As in paint marker or anything that might cover it up? (except for a backplate protector or snap in ) hate all of those.
Obviously goes without saying all help would greaty be appreciated and used to reinstate my inner tranquility.
Best Regards
Shallowmist
Click to expand...
Click to collapse
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.
Good point
Dsteppa said:
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.
Click to expand...
Click to collapse
Excellent point my friend, i shall aquire the afore mentioned pictures later today with my trusty Xperia Play. At any rate i tried to explain it as best as possible but like you said without pictures it's just horrible....
Pictures Update!
Dsteppa said:
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.
Click to expand...
Click to collapse
Here are the PIC updates.
Shallowmist said:
Here are the PIC updates.
Click to expand...
Click to collapse
I have a ding jus like that on my phone next to the microphone port...I dont even know where it came from!! I havent dropped it...I even rest it on a napkin on my desk and its always in my left pocket which is solely dedicated to my XZ ...lolz...nooo idea....
I feel your pain bro i too have a couple of nicks on the phone and it's bugging me lol
Is there any feasible action to undertake here.
Teknohtc said:
I feel your pain bro i too have a couple of nicks on the phone and it's bugging me lol
Click to expand...
Click to collapse
It is incredibly annoying to have these nicks and scrapes on it. Obviously it beats not having the phone or having broken glass, but everyone has their own problems i guess. Is there seriously nothing that can be done about this?.
Shallowmist said:
It is incredibly annoying to have these nicks and scrapes on it. Obviously it beats not having the phone or having broken glass, but everyone has their own problems i guess. Is there seriously nothing that can be done about this?.
Click to expand...
Click to collapse
I think the only thing you can do is replace the whole skeleton :crying:
Shallowmist said:
Here are the PIC updates.
Click to expand...
Click to collapse
May i know where you get your back screen protector/picture ?
I was afraid fo the skeleton thing and skin is from!!!!
joejoe23 said:
May i know where you get your back screen protector/picture ?
Click to expand...
Click to collapse
I was afraid that the skeleton might have to be changed, but the skin is front and back the only visible parts left on the phone are the little black sides i got my bumps on and the front glass. I purchased mine from http://www.ebay.co.uk/itm/ws/eBayIS...9&ssPageName=ADME:L:PMR:NL:1123#ht_6096wt_907
They have many different models i just got this one. These guys are amazing in bringing out good things i had one of those on ipod 4 used it 8 months than sold the ipod never had problems with the skin.
xperia z
is there a factory screen protector on the back of xperia z, as there is on the front. I scratched the back of the Xperia z. And if there is no screen protector back, is there a possibility of polishing
I did the same thing. I was so in love with the screen I didn't think to check out how scratch resistive the rear panel was until I had let it get sl gouged to all hell
Mines missing both the USB and heaphone flaps, front and back are cracked, there is virtually nothing left of the plastic around the outside and the bottom face is missing the sticker that has the barcode and such on...
Makes me laugh when people worry about little marks
Hi hope someone can offer some advice, I have replaced the screen on my Z3 compact. Screen works fine but it is lifting and not sticking. I have tried different types of tape, I have applied tape to the edge of the screen itself and the frame it's still lifting. Please can someone offer some advice
Sent from my D5803 using Tapatalk
Any one got any advice, this must be an issue somewhere.
Sent from my D5803 using Tapatalk
ali.gore said:
Any one got any advice, this must be an issue somewhere.
Sent from my D5803 using Tapatalk
Click to expand...
Click to collapse
Consider buying a B-7000 glue, it is used for displays mostly, I was advised by a friend to use it, since my screen has unglued as well, and he has already repaired couple of Z3/Z3c devices with it, and there were no reported lifted screens since than. For the back panel, you can use double sided tape, but adding B-7000 glue on one side (to avoid cracking sounds, depending on the used tape probably). You can do a bit of searching on Youtube for repair videos, I recall watching some with the mentioned B-7000 glue, easy to find.
I haven't done it myself, but I will very soon, dust has filled my front cam, and proximity sensor.
Good luck.
Cirra92 said:
Consider buying a B-7000 glue, it is used for displays mostly, I was advised by a friend to use it, since my screen has unglued as well, and he has already repaired couple of Z3/Z3c devices with it, and there were no reported lifted screens since than. For the back panel, you can use double sided tape, but adding B-7000 glue on one side (to avoid cracking sounds, depending on the used tape probably). You can do a bit of searching on Youtube for repair videos, I recall watching some with the mentioned B-7000 glue, easy to find.
I haven't done it myself, but I will very soon, dust has filled my front cam, and proximity sensor.
Good luck.
Click to expand...
Click to collapse
other solution than b7000 ? from what i read on forums, after a while also this glue become "unglued"...clean, unclean, is still da same.
op3n said:
other solution than b7000 ? from what i read on forums, after a while also this glue become "unglued"...clean, unclean, is still da same.
Click to expand...
Click to collapse
I think B7000 will get the job done. I have used it for my device and it has been a month already, screen and back plate haven't moved a bit, its like new. One thing to remember though, you have to make sure the whole frame is COMPLETELY covered with glue, otherwise it will not be enough to hold the screen. I made a mess at first try, because I missed some spots and the screen lifted on sides, next time though, I've checked 3 times for any empty spots and applied glue to those spots, now everything is perfect. Of course, you should cover frame only, avoid applying that much so that glue is dripping inside the phone itself.
Good luck
Cirra92 said:
I think B7000 will get the job done. I have used it for my device and it has been a month already, screen and back plate haven't moved a bit, its like new. One thing to remember though, you have to make sure the whole frame is COMPLETELY covered with glue, otherwise it will not be enough to hold the screen. I made a mess at first try, because I missed some spots and the screen lifted on sides, next time though, I've checked 3 times for any empty spots and applied glue to those spots, now everything is perfect. Of course, you should cover frame only, avoid applying that much so that glue is dripping inside the phone itself.
Good luck
Click to expand...
Click to collapse
Gooood,ill give it a shot. But i was thinking if must remove back cover and the screen for glue only a corner...the back cover doesnt have any problem, only the display in left corner is unglued. And if i must to remove thats, i must buy and that adezive black or simple use only b7000 ? Thanks
I have some of the B-7000. Stuck the screen down over a week ago appears to be fine. The only issue I have is that I think the glue has squeezed onto the front camera, the camera is now blurred. I don't use the front one so it's not a big problem.
Sent from my D5503 using Tapatalk
op3n said:
Gooood,ill give it a shot. But i was thinking if must remove back cover and the screen for glue only a corner...the back cover doesnt have any problem, only the display in left corner is unglued. And if i must to remove thats, i must buy and that adezive black or simple use only b7000 ? Thanks
Click to expand...
Click to collapse
I have used the glue, it's fine, you don't need stickers
You can try applying the glue only in that corner as well, but I'm not sure how well will that fix the issue.
I had to remove the screen anyway to clean the notification led cutout and front camera, so I didn't care for the back plate sticker.
Cirra92 said:
I have used the glue, it's fine, you don't need stickers
You can try applying the glue only in that corner as well, but I'm not sure how well will that fix the issue.
I had to remove the screen anyway to clean the notification led cutout and front camera, so I didn't care for the back plate sticker.
Click to expand...
Click to collapse
go0o0d thanks man