Keyboard problem - Hardware or Software? - Tilt, TyTN II, MDA Vario III General

Hi guys,
I searched and found nothing specifically related to this. I tried disableXT9.cab but it did nothing.
I recently broke the screen on my second Kaiser so I had to replace it with the screen from my first (which reception problems so I stopped using it). To do this I followed the guide posted in these forums on disassembly and successfully switch the screen. I sent text messages right away after I reboot my phone and the keyboard was working fine. A few minutes later a few of the keys had stopped working. The delete key didn't work. At one point it started to work again but didn't work anymore after that.
I figured it was a connection problem so I took my kaiser apart again and rebuilt it. Unfortunately it didn't work. I tried again. This time some more keys stopped working (not sure if its because of disassembly or not - my connections are perfect). It's possible I scratched the connection ribbon... so I replaced the keyboard with the keyboard in my other phone, but I still have the same problem.
Is this a hardware problem I can't fix? (if so why did it work right after I got it to work the first time)
Or is there something funky going on with my software?? Can I fix this?
Thanks!

I tried to flash a new ROM and the same keys are still not working.
I guess this means it's a hardware problem???
Does anyone know if I can do anything to fix this.. i already tried switching the keyboard...

i'd like to figure this out as well.. i don't think it's hardware as i've changed my tilt 5 times already by complaining about the keyboard.. is yours like mine where it works sometimes but not all the time?

Related

help my keyboard and dial keys dont work!

hi everyone.
i was wondering if anyone can help me with this. so ive had my tilt for about 6 months now. and i havent had any problems until now. The keyboard doesnt work at all now. and the dial and hang up button on the front of the phone dont work. The touch touch screen works fine. But the keyboard doesnt work at all, and nor do the buttons on the front work (except for the middle button, and when i press it, it brings me to the screen alignment). i was wondering if anyone can help me fix this.
i dont have insurance on the phone, and im not sure if its some kind of software issue. I tried doing the update on the phone, but it tells me there are no current versions. I also tried doing the softreset and taking out the battery. Deleting everything on the phone and going back to stock software.
if anyone can help me id greatly appreciate it. thanks.
your phone does have a 1 year warranty on it. Turn phone to stock (rom, spl, etc) and get it exchanged for another unit.

Sometimes I can't answer the phone with hardware buttons ;/

Hi guys,
I'm quite newbie... I've just moved from SPV c600 to DIAMOND. I've one problem that really makes me mad. At first I must tell that I've tried everything hard reset , than checking if any apps is causing that one by one-with no result. Occasionally I just can't pick up/refuse a calls with HW buttons. I use S2U2(installed yesterday), but this problem I had even before i installed that app. Does anybody of you experienced such an issue? Anybody knows the answer how to fix it? Thanks in advance
Same thing happens to me! It is like HW buttons work whenever they want but not all the time. If you install AEButton Plus you can remap HW buttons, but again the same thing will happen. The changes will work sometimes but not always.
I have a similar problem. Can you answer with soft buttons? Hoping some solution ideas will appear here or in that thread.
Same issue here.
I have added my experience to the above listed thread, and also opened a thread at Howard Forums.
http://www.howardforums.com/showthread.php?p=12088702#post12088702
This has become extremely frustrating.
Sprint has not been very receptive to this either.
what works for me is to lock & unlock the screen.
unless it case is related to another problem which i have experience before as well. But this has gone away since i loaded a different rom from the original htc.
*edit
this should fix it
http://forum.xda-developers.com/showthread.php?t=451647

My buttons don't want to be touched...

Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.

Very Frustrating Problem - Please help me!!

Hey everyone,
My problems consists of:
- The screen/touch is off. I've done Screen Alignment, it works for a couple hours or so then it just starts to have a mind of its own again
- When I slide the keyboard out, the screen does not rotate, it's just frozen in portrait mode. However, responds to the keys I push on the keyboard, I've tested it by texting someone.
The ROM I was using was a Generic NAM R3A WM6.1 when this problem occured, tried to re-flash with the same ROM, no luck and finally a custom one (Touch X 10.8) and unfortunately, still no luck.
I've never dropped the phone or done any modifications to it. Am I doomed and will have to send the phone in for repairs or is there another way to fix all this?
Thanks
exdout said:
Hey everyone,
My problems consists of:
- The screen/touch is off. I've done Screen Alignment, it works for a couple hours or so then it just starts to have a mind of its own again
- When I slide the keyboard out, the screen does not rotate, it's just frozen in portrait mode. However, responds to the keys I push on the keyboard, I've tested it by texting someone.
The ROM I was using was a Generic NAM R3A WM6.1 when this problem occured, tried to re-flash with the same ROM, no luck and finally a custom one (Touch X 10.8) and unfortunately, still no luck.
I've never dropped the phone or done any modifications to it. Am I doomed and will have to send the phone in for repairs or is there another way to fix all this?
Thanks
Click to expand...
Click to collapse
If I were you, I'd have it back in the shop in no time. But you will need to put back the original rom, otherwise your guarantee will be gone.
Good luck!
Don't forget to revert the SPL since you flashed it to hard SPL.
If You make a new topic then it's pointless to use not at all informative cries for help. It does not say anything about the problem you are having.
The title should say something about the issue so people who know something about notice it and can offer to help and people having the same issue later can find this topic.
Sorry, I'm new to this message board and not really around either.

Sony Xperia SP - touch screen sometimes stops working after its replacement

Hi,
After having unresponsive area of touch-screen on my Sony Xperia SP I decided to buy this from aliexpress and replaced it myself carefully. It works nicely, but after some time of using the touch stops responding. It might be that when I push too much to some very edge of this touch screen causes this (but sometimes not, so it is quite hard for me to detect what could be the real cause). After that I need to leave the phone for some time and eventually switch it off (by hardware OFF button on the back of the phone), then it works again. Restarting (switching phone on and off itself does not help, looks like one needs to wait and try to use again only a bit later). Does anybody have the same after touch-screen replacement on this phone, please? And maybe how did you manage to solve?
I have already tried to flash original firmware (generic CE1) inside (this works great with another phone Sony Xperia SP) just to be sure that it is not software related.
Thanks a lot in advance
Martin
I have replaced mine too but except from one issue everything is working fine. This issue is that the touch won't work if I restart the phone without turning it off before. That means that rebooting from the recovery into system and rebooting from system itself will make the screen unresponsive until I shut it down. Then everything is working normally. It's a bit annoying but if I simply turn it off and then on again instead of rebooting I can bypass this issue. I tried it with stock rom too and there the issue still persisted.
Furthermore I can push the screen as hard as I want and it does not affect the touch responsivness. That means if it's working it will still work after pushing it hard and if it's not working (because of rebooting) it will still not respond.
So I would either suggest you to check if it is connected correctly and if it is maybe replace it with a different one.
In my case the first screen replacement didn't work perfectly so I got a new one and that finally worked.
Cyb3rzombi3 said:
I have replaced mine too but except from one issue everything is working fine. This issue is that the touch won't work if I restart the phone without turning it off before. That means that rebooting from the recovery into system and rebooting from system itself will make the screen unresponsive until I shut it down. Then everything is working normally. It's a bit annoying but if I simply turn it off and then on again instead of rebooting I can bypass this issue. I tried it with stock rom too and there the issue still persisted.
Furthermore I can push the screen as hard as I want and it does not affect the touch responsivness. That means if it's working it will still work after pushing it hard and if it's not working (because of rebooting) it will still not respond.
So I would either suggest you to check if it is connected correctly and if it is maybe replace it with a different one.
In my case the first screen replacement didn't work perfectly so I got a new one and that finally worked.
Click to expand...
Click to collapse
Thanks a lot for your response.
I actually took the phone apart several times (disconnected and reconnected connectors inside there), hoping that it could help. I also tried to put insulation between the touchscreen and the phone frame, as I noticed that it was attached on the original touchscreen, but was missing on the new one. So I gently removed it, then sticked it onto the new one. Still did not help with my issue.
Which kind of issue you had with your first replacement?
The issue was that a small part of the sreen didn't respond. The second one was working fine then.
You could order a new one and test if get's better. If not simply send it back. At least that is what I would do in order to minimze the possible sources dor that error.
Cyb3rzombi3 said:
The issue was that a small part of the sreen didn't respond. The second one was working fine then.
You could order a new one and test if get's better. If not simply send it back. At least that is what I would do in order to minimze the possible sources dor that error.
Click to expand...
Click to collapse
Thanks for the reply once again. In the meantime I have contacted the seller, also got in contact with service-man, who is willing to have a look at it.
Then I wish you good luck :fingers-crossed:

Categories

Resources