Hi men! My friend has a kaiser faulty. We don't know what happened with it, but it powering off at the Windows Mobile screen, accompanied by a flashing red light and beeping sound. It does not get past the vodafone screen whilst on the charger either.
Holding the camera button puts the phone in bootloader mode which is the screen with the red green and blue bars on it.
What I can do? What is happened? thx
thats a new one for me
ive never seen a kaiser faulty
why you tell us? is there some people who can help me?
Try flashing a new ROM
I don't know if it is cid lock or unlock, if it is lock, can I unlock it without problem? Remember it doesn't start and don't sincronize with activesync
granchi0 said:
I don't know if it is cid lock or unlock, if it is lock, can I unlock it without problem? Remember it doesn't start and don't sincronize with activesync
Click to expand...
Click to collapse
Read the Wiki about CID lock / unlock.
If it is unlocked, then there should be something on the screen of the bootloader to tell you if I remember correctly.
Related
Hi. I tried to flash my kaiser to new Dutty's wm 6.1 rom (had Dutty's v3 before so i had hardSPL) and after the rom update process completed my kaiser died , screen is always black no matter i connect it to charger or push power, is there any possibility to bring my phone back 2 life?
Have you taken the battery out?
Have you tried flashing from SD card?
http://forum.xda-developers.com/showthread.php?t=336158&highlight=flash+from+card
Worked for mine when i bricked it.
i have taken battery out , it wont help. also flashing from sd card works only when u can actually power on the device and i cant do it. name of my rom wasnt RUU_signed.nbh it was : Ruu_Signed_Duttys_WM6.1_5.2.19716_1.64.08.21.nbh maybe thats the reason of error
Well did you try the special key sequence to try to turn it on?
special key sequence? U mean both softkeys and stylus into reset hole?
Can you get it to the HSPL screen?
hold camera button and stylus into reset hole?
If you can to there you can reflash it using the sc card method.
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
Click to expand...
Click to collapse
not the soft keys
thanx but it wont work, if i could enter bootloader i would just reflash the rom, but i cant get my phone on, screen is all the time black. if i plug in a charger there is no charging led too.
Ok, so your saying you tried it and it doesn't work?
im saying this doesnt work because my phone is totally dead. i cant get any response, it just wont turn on.
ok I'm taking it that you didn't try that sequence because you won't say that you tried it.
Hell no he/she ain't tried it. Probably has no idea what you are telling him to do.
Well Belizibub told him, I just started reading between the lines and noticed that he never admitted to trying it.
I love your avatar Tater.
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
how come i try to enter bootloader , the phone is D E A D, it doesnt respond on any key cominations. i cant see even blank screen, nothing, it just wont turn on.
take the battery out and plug it into the charger, if a red light comes on thats a good thing if not then you probably have whats known as a "bricked kaiser" and sent it in for repairs or go buy a new one and save that one for parts.
marcini said:
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
Click to expand...
Click to collapse
LOL, not even worth it.
So let me ask this, Why was this thread started? Was someone seeking help? Has someone provided the possibility of help? Do you think that the devils friend didn't understand that to this requester of help, that his phone appeared to be dead? Or is it possible the Devils right hand man knows something that the requester of help doesn't know and kindly attempted to share it with him, just to have the secret unlock code ignored.
Try up up down down left right left right a b select start.
That will fix your phone.
ps, what I'm getting at is if you haven't tried it then you need to try it. The special key config could possibly turn the phone on for you.
OK, now I see this same conversation going on in 2 different forums by the same person. Here and in Dutty's latest 6.1 release.
I noticed you are an Orange user. I have seen Multiple Orange users trying to flash radios to their phone and locking them up. I suggest looking/searching for one of those threads and see if they have a solution.
Ran the Kaiser unlocker on my phone, went through all three steps, and now my phone is just a black screen. The buttons light up, but thats it. Did hard reset, soft reset. Will show ATT screen, and then just black. I dont know what to do.
TheNational22 said:
Ran the Kaiser unlocker on my phone, went through all three steps, and now my phone is just a black screen. The buttons light up, but thats it. Did hard reset, soft reset. Will show ATT screen, and then just black. I dont know what to do.
Click to expand...
Click to collapse
Only so that someone CAN help you please state the following:
1. what ROM and carrier did you have on your phone before this problem?
2. What ROM were you trying to flash?
3. what are the three magical steps that you actually DID?
Bill
Reply
I have an ATT Tilt, trying to unlock to T-Mobile
Downloaded Olipro SIM/CID unlocker
Opened the EXE, went through all three steps, my phone went right along my pc, then when it re-started, a wav file (or some sound file) was skipping, the windows mobile screen flashed, now the lights turn on under the buttons, screen is black.
Did Hard and Shot resets, just get ATT splash
Checked in original thread, didn't see anything that referenced this issue
Just need some help, if anyone can.
Thank you all very much
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
if you go the wiki page for this device it might help you out, or try searching google
shuman said:
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
Click to expand...
Click to collapse
try contacting GSLEON or Jockyw2001
Go here http://forum.xda-developers.com/showthread.php?t=393337 , download attached files and start from step 4
what kind rom are you using if its 6.0 then theres the problem flash to a 6.1 rom
How do I fix the rom 6.1? It is total dead seemz, not even power light! any help is much appreciated.
Did you try bootloader mode? Power+Camera+Soft reset button?
Kraize
I dont belive I tried the boot loader mode. I'll do that, however, what should I see if go into bootloader mode? what is the next step. Thanks everyone for their help, much appreciated.
No luck, I tried bootloader mode, same thing, all i get green power light and black screen!
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Hey,
any help with a Tri-colour screen problem?
other thing is, i can't tell where to read your reply from
Jerry
Hey,
can anyone help me with AT&T 8925 Tri-colour screen problem?
msn please @ [email protected] because I have no idea how to read the reply to this post, I'm new to all this..
It froze one day, soft reset and it came back in tri-screen. I plugged it into the charger and it worked..
Did that a few times now it won't do anything and it is stuck in tri-colour with:
KAIS1*0
SPL-1.93.000
CPLD-8
i didn't instal anything, it just locked up and not nothing I do, soft or hard reset will make it come back.
I also wanted to install an Australian OS to Telstra maybe, but not sure which ROM or RUU to download.
Can anyone help please, this is extremly important... and donations will be paid on completion of problem.
Thanks
jasonrush said:
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Click to expand...
Click to collapse
what if set can't conect with mtty and no conectivity with the pc and only green lights on the set?????
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
montreezy said:
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
Click to expand...
Click to collapse
Try following all these steps.
http://forum.xda-developers.com/showthread.php?t=433835
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.
Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!
tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.
still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!
1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.
The right side of my Vivid's screen is notably darker than the left and the of the 4 buttons on the bottom of the screen, only the home button appears to be at the brightness it should be at. The rest are all super dim or off. When I turn my vivid off, the screen is off, but the button lights are still on. The 4 buttons also work. Ive tried taking out the battery and putting it back in numerous amount of times and restarting it. Does anyone have any suggestions on how to fix this?
ducksncow said:
The right side of my Vivid's screen is notably darker than the left and the of the 4 buttons on the bottom of the screen, only the home button appears to be at the brightness it should be at. The rest are all super dim or off. When I turn my vivid off, the screen is off, but the button lights are still on. The 4 buttons also work. Ive tried taking out the battery and putting it back in numerous amount of times and restarting it. Does anyone have any suggestions on how to fix this?
Click to expand...
Click to collapse
Well, try flashing another rom, or downloading and flashing the RUU. or send in to ATT for warranty repair if still applicable.
Dont Forget to Hit Thanks!!
XxSHaDoWxSLaYeRxX said:
Well, try flashing another rom, or downloading and flashing the RUU. or send in to ATT for warranty repair if still applicable.
Dont Forget to Hit Thanks!!
Click to expand...
Click to collapse
thanks for responding
Well the problem with that is that I've never had a custom rom or an unlocked bootloader and I cant get a warranty repiar.... Do you have any other suggestions?
ducksncow said:
thanks for responding
Well the problem with that is that I've never had a custom rom or an unlocked bootloader and I cant get a warranty repiar.... Do you have any other suggestions?
Click to expand...
Click to collapse
You can still run an RUU if you've never unlocked. Turn USB debugging on, put the phone in Charge only mode, run the correct RUU (Gingerbread if you're on Gingerbread, ICS if you're on ICS)
However this sounds like hardware to me
homeslice976 said:
You can still run an RUU if you've never unlocked. Turn USB debugging on, put the phone in Charge only mode, run the correct RUU (Gingerbread if you're on Gingerbread, ICS if you're on ICS)
However this sounds like hardware to me
Click to expand...
Click to collapse
i agree. you might be screwed here
I would think something got messed up and its making it do that. Try flashing an RUU or custom ROM like they said. Hopefully its not the actual screen if it is just replace it