Related
Hello.Sorry for wrong english.
my problem is on cingular 8125
I bought it with problem.
On splash screen it freeze, i flash RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1,because it firmware for cingular 8125. and it freeze too.
Can you help me?
my ipl 2.25
spl 2.25
gsm 02.25.11
os 2.25.11.1
Thank you. and again sorry for wrong english.
Ok Dude here is your solution ive found it myself after Searching
I will not be liable for Bricking your Device you do this at your own Risk*
First of All Is your Phone CID unlocked?
if it is check to see if you can hard reset if your phone says Format is Failed then here is your fix
First flash factory rom
grab a minisd that is blank *Warning it will Overwrite any card you put in*
enter into bootloader
reset+ camera button
in windows xp
Download mtty
http://forum.xda-developers.com/attachment.php?attachmentid=71806&d=1203597568
Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
run program
set port to
\\.\WCEUSBH001
click OK
*Warning it will Overwrite any card you put in*
type in at CMD>
r2sd all
then press enter
after it finishes reset pda and return back into bootloader mode
reset+ camera button
it will ask if you wish to flash from sd press Voice Command button to accept
after 100% complete reset phone you should be able to get back
hello. thank you for a help. mtty says me You didn't get the proper security level to download a specific image. why i do wrong?
cg_ar said:
hello. thank you for a help. mtty says me You didn't get the proper security level to download a specific image. why i do wrong?
Click to expand...
Click to collapse
Your phone is CID locked,Mtty will not work in this situation. Have you tried a Hard Reset.
Does it display any error message while flashing the official Rom,does it complete flashing or stops with a error message ?
Which windows you are flashing with,WinXP or Vista ?
when hard reser it says me a fat format failed. all sw flash without problem.
Anybody know how this is repair? (sorry for wrong english)
cg_ar said:
when hard reser it says me a fat format failed. all sw flash without problem.
Anybody know how this is repair? (sorry for wrong english)
Click to expand...
Click to collapse
how it cid unlock in bootloader mode?
cg_ar said:
how it cid unlock in bootloader mode?
Click to expand...
Click to collapse
You cannot CID unlock in the Bootloaders,it has to have a working OS (Rom),try to flash a rom,try these roms,lets hope one of them might work, Button's Rom 1.05 or xda_minis_launch or wizard_love_rom and official rom of your carrier and if there's any sdcard/mini_sdcard inserted in the phone,take it out before flashing,just keep on trying the different roms,its a catch 22 situation,it won't let the rom flash,stuck at splash screen and still it won't get CID unlocked in Bootloaders or use the Mtty method.I can imagine your frustration,but you gotta keep on trying.
i tried Xda_MiniS_LaunchROM_v154102,wizard love,button and original rom from cingular. and it freez on boot at all roms,and cannot make a hard reset. what i will doing next?
in this condition phone is not repairable?
cg_ar said:
in this condition phone is not repairable?
Click to expand...
Click to collapse
YES ! it is repairable,but not free,you'll have to pay for getting the CID unlock code from 'imei-check' uk.They might charge you around 20 or 30 dollars and provide you with a unlocking code,after that you'll be able to flash any Rom,but,here we were trying to get it working free somehow! Anyway, the choice is yours now,but certainly it is repairable,don't loose hope !
zabardast_1 said:
YES ! it is repairable,but not free,you'll have to pay for getting the CID unlock code from 'imei-check' uk.They might charge you around 20 or 30 dollars and provide you with a unlocking code,after that you'll be able to flash any Rom,but,here we were trying to get it working free somehow! Anyway, the choice is yours now,but certainly it is repairable,don't loose hope !
Click to expand...
Click to collapse
I know a way to avoid paying and manage a security_level=0 to allow "r2sd all"
It's just a matter of flashing a SoftSPL for G3 and use mtty
"Hello,
if the device doesn't boot up in windows then unlocker it will not work!
Regards,
IMEI-CHECK Team"
it says on imei-check.
how i will did?
what is softSpl for g3? please give url. thank you
mestrini said:
I know a way to avoid paying and manage a security_level=0 to allow "r2sd all"
It's just a matter of flashing a SoftSPL for G3 and use mtty
Click to expand...
Click to collapse
hey m8
You referring to 'JumpSPL' or something ? thats interesting
cg_ar said:
"Hello,
if the device doesn't boot up in windows then unlocker it will not work!
Regards,
IMEI-CHECK Team"
it says on imei-check.
how i will did?
what is softSpl for g3? please give url. thank you
Click to expand...
Click to collapse
hmmm, so imei-check' said that,yeah ! I presume,you got to have a working OS (Rom)
Well, softSpl for G3, I'm not sure myself,let mestrini handle this.
zabardast_1 said:
hey m8
You referring to 'JumpSPL' or something ? thats interesting
Click to expand...
Click to collapse
Something like that
If i recall correctly while developing SoftSPL for G4, The Equinox also made a G3. Problem is no one ever thought of a use to it (until now, and i have others hehe )
mestrini said:
Something like that
If i recall correctly while developing SoftSPL for G4, The Equinox also made a G3. Problem is no one ever thought of a use to it (until now, and i have others hehe )
Click to expand...
Click to collapse
WOW !
I'm all anxious here...... eyes n ears !!!
i download a wzg3.7z. unpack and have
Hard-SPL.nb
JumpSPL.exe
SPL.lnk
spl.nb.
it has in pack 145kb is it alright?
and jumpspl cannot execute and spl.ink too. How this flash?
cg_ar said:
please mail me softspl for wizard g3. because from my ip on rapidshare already downloading. please mail on cg_ar(a)mail.ru
Click to expand...
Click to collapse
Well, I do realize your frustration,but this application still needs to be tested and tried first,as far as I know,it has not been applied and tried yet.
But keep your fingers crossed as I'm,hope it comes out successful,it wud solve this problem of not allowing to "r2sd all" using mtty in CID locked device.
hmm, there's a flaw in my theory: It's necessary to access WinCE (WM) to allow Haret to do it's job
Maybe there's a work around i can think of...
sorry
cg_ar said:
i download a wzg3.7z. unpack and have
Hard-SPL.nb
JumpSPL.exe
SPL.lnk
spl.nb.
it has in pack 145kb is it alright?
and jumpspl cannot execute and spl.ink too. How this flash?
Click to expand...
Click to collapse
What to do?
hello could anyone help me ?
my device is stuck in bootloader and its recognized by the PC
this happened when i was trying a cooked rom
IPL 1.09.0001
SPL (ditto)
I searche everywhere an there seem to be only ways out for people with SPL 4.00.xxxx
is there a way out ??
thank you
sorry fr the bump but i really need help
I tried placing the phone in bootloader and installing the official HTC rom
but i get an ERROR 300
and the percentage is stuck at 0 on the screen
Try to flash your device with the Stock ROM.
That usually works
He already tried this, but it didnt work.
Let me just quote a post from dougstoner:
dougstoner said:
Well, yes and no. In the long run, it's better to Hard spl your phone. A lot of the roms in the forum require hard spl first. If you somehow fail during the hard spl, then you end up with a "brick". I used the uspl method first to flash, and it was a little easier to do, but hard spl'ing insn't complicated either. You just have to make sure of your ipl number is higher than 4. You can check this by holdign down the camera button, and press the soft reset button (use the stylus on the side to press) and continue to hold the camera button until you get to what's called the bootloader screen. It's red, blue, and green. Here are the instructions for hard spl, but MAKE SURE your ipl number is hight FIRST. If it isn't, you will brick your phone.
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/...l_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
Click to expand...
Click to collapse
So the IPL should at least be 4.xx but as you posted yours is 1.xx?! Might this be the issue?
Unfortunately, a SPL of 1.x after a hardspl/USPL means that the phone has been permanently bricked. Did you try to hardSPL your device or use USPL? They're both only compatible with 4.x SPL's.
I saw that someone recently came up with a way to fix bricked phones. They weren't Heralds, I forgot what they were... They basically found a way to use a buffer overrun on the SPL to launch code so they could launch a patched SPL and reflash... i wonder if our SPL's have that same bug and the method could be applied to us, too.
hey,
if my Herald is IPL 1.xxx can I somehow make it a 4.xxx? Or is there no chance to flash other roms? What does the IPL depend on? Production date?
thanks everyone for your patient replies
I guess for IPL 1.x there seems to be no solution as of now !!!
it was actually working initially with touch IT after Hard spl but i wanted to give a try to another version of touch it thats when the device got bricked .
I feel really sorry for you, but dont give up yet. As ivanmmj said, there could be a solution. Just check the forum.
I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck
xtc.sanchez said:
I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck
Click to expand...
Click to collapse
thanks so much mate !!! I will look into it right away
iv done all the reading
iv heard there was a way to flash the ROM through SD so i did try using
HERAIMG.nbh for the official rom from the HTC website !!
somehow the ROM does not work (invalid rom)
id try a couple of roms !!maybe ill be lucky !!
thanks again xtc.sanchez and everyone else
its been very informative and helpful
my helard p 4350
ipl 1.08.0001
spl 1.08.0001
i try to flash custom room so that happened
and when i try to flash any room its display invaild update tool
stuck on boot loader what can i do
plz advise me
thanx for ur cooperation
try this thread. read the WHOLE thread and carefully:
http://forum.xda-developers.com/showthread.php?t=417930
mr_guitar_eg said:
my helard p 4350
ipl 1.08.0001
spl 1.08.0001
i try to flash custom room so that happened
and when i try to flash any room its display invaild update tool
stuck on boot loader what can i do
plz advise me
thanx for ur cooperation
Click to expand...
Click to collapse
you could also try this:
Originally Posted by ivanmmj
So, you've decided that your shiny new toy isn't very well setup by default. You flashed a ROM and lo and behold, you missed some instruction somewhere and now you think it's bricked.
Here's the good news:
It's not bricked!!
Bricked means that it's dead and it's in no way or shape recoverable.
There is still a chance. (As long as you didn't try to hardSPL with another Device's SPL...)
All you have to do is:
For the WING:
Hold the Camera button and WHILE holding it, soft reset the device (that means press the little hole above the memory card with the stylus.) That will bring you to the bootloader. Now download the appropiate RUU and run that program. A few minutes later and your new shiny toy is back to it's crappy OEM but working self!
I'll put in links for those who can't find them...
In his case, the goldcard is the answer. He did not heed the warnings about flashing a phone with an SPL/IPL lower than 4.
ivanmmj said:
In his case, the goldcard is the answer. He did not heed the warnings about flashing a phone with an SPL/IPL lower than 4.
Click to expand...
Click to collapse
thats what i thought.
what the gold card
actually i falsh a new room through hard spl then i try to falsh another one through ruu,
but now when i go through bootloader and the three coloure displayed i cant flash any rom cuz its stopped at 0% and the msg invalid,,,,,,,,,,,,,
so ?
What did you flash the second time? It broke your SPL and IPL.
Search for the word Goldcard.
spacemonkey333 said:
try this thread. read the WHOLE thread and carefully:
http://forum.xda-developers.com/showthread.php?t=417930
Click to expand...
Click to collapse
i gave him the goldcard link already
thanx for the link mr but it must need a memory card
is that right
and the steps is not clearly
plz any one help me
[email protected] plz contact me via mssenger
Br
is there any way to get back my device gold card doesnt work
That's the only known method. If it's not working properly, make sure you're following the steps properly. If it still doesn't work, then it's repair time... Sorry.
Done ,, gold card is great
thanx my friends
Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy
stussy said:
Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy
Click to expand...
Click to collapse
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.
philrom said:
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.
Click to expand...
Click to collapse
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.
stussy said:
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.
Click to expand...
Click to collapse
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.
philrom said:
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.
Click to expand...
Click to collapse
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...
stussy said:
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...
Click to expand...
Click to collapse
??
What's the situation now? What SPL version do you have now?
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i check now
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
Now my SPL is SPL-1.56 olinex
But the screen colour become 3 colour only ... just look alike our computer safe mode
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?
Just do the guide from Digital Outcast Step-by-Step and you can't go wrong.
If you got a problem with a certain step, then explain it detailed.
We can't help if we don't know the exact problem.
stussy said:
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?
Click to expand...
Click to collapse
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.
philrom said:
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.
Click to expand...
Click to collapse
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot
stussy said:
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot
Click to expand...
Click to collapse
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.
philrom said:
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.
Click to expand...
Click to collapse
I will try tonite bro, anything will let you know
Thanks a lot
Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:
Omar Sammak said:
Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:
Click to expand...
Click to collapse
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794
xdrc45 said:
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794
Click to expand...
Click to collapse
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:
Omar Sammak said:
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:
Click to expand...
Click to collapse
Your welcome... You'll have your HD7 up and running a custom rom in no time!
xdrc45 said:
Your welcome... You'll have your HD7 up and running a custom rom in no time!
Click to expand...
Click to collapse
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???
Omar Sammak said:
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???
Click to expand...
Click to collapse
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.
xdrc45 said:
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.
Click to expand...
Click to collapse
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen
Omar Sammak said:
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen
Click to expand...
Click to collapse
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:
Omar Sammak said:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:
Click to expand...
Click to collapse
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.
xdrc45 said:
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.
Click to expand...
Click to collapse
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!
Omar Sammak said:
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!
Click to expand...
Click to collapse
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.
xdrc45 said:
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.
Click to expand...
Click to collapse
i installed the two ... but i notested that Deepsharing 7 is not established dont know why .. digital power is not working well even when i restart my phone ant rooted the phone and usb video didnt work
so i returned to Nextgen v3 its lighter and stable