Related
Hi tut,
that was a great rom you have made. I am compltly enjoyin it. I am going to do it on my pda 2k too which is running on 2003 SE edition, i bought xda2s because of the low microphone problems in pda2k, noone could hear what i speak- i had to yell,drilled a bigger hole at the mic, still didnt work. I upgraded your WM5 on my xda 2s. works like a dream. Even the speaker icon problem is solved once the handsfree is removed from startup. I have only one problem which is annoying me:
When i select lock all buttons except power - the buttons like mail still do work. It used to happen all the item in the previous mamiach version. Now it happens once every three times or so. Its very annoying as i use the phone in a case and into my pocket and when power it on all kinds of programmes are on and the phone is usually hangs at this time.
Can i use the same patch which is buttons or something like that into your version? Because it did work in the previous version by mamiach.
And do you think mic problem on my pda2k will be solved with this 1.3version? As iv heard that mic has to be replaced or something for it to work well.
Regards,
Varun
Who are you talking to?
Point me to the thread and I'll move this orphan post to its parent.
V
ya i got it...thanks a lot.
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
same problem
i have the excact same problem as you, so someone please respond
same problem
me too, absolutely no ring even after reset !!!
probably a stupid question, but have you got the profile set to automatic?
if so, it will go to silent whenever there is an appointment in your calendar.
If not, then ignore me, it was just an idea...
The profile is set to normal. I forgot to mention this. I would not ask a stupid question like that. Thanks anyway.
i have the same problem. during the day, i must restart my divece, once or twice, because my ring disapear. the microphne too, i don t hear the other person that calls me.today i went to my mobile service provider and i changed my SIM, but the problem is sthe same. i have 1.93 ROM, not cooked, is the default one. when i bought my diamond, the problem exist, when i update for the first time with the previous of 1.93 ROM, the problem wasn t.my phone was work divine.now, with 1.93, the NOT RINGING is backpls hlp me.thnx
Why don't you try a hard reset I am sure the problem will go away....
try the original rom from the htc
try to put the original htc rom 1.93 wwe and it will be work
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
I have this problem but ONLY after listening to music over a bluetooth headset.
I know this maye sound silly, but when you test your phone to make sure it is going to ring, make sure the volume (buttons of side of the phone) is up full.
A few times I have been in 'normal' made, but the phone only vibrates - this is because I have somehow lowered the volume by pressing the side keys.
May save a a few blushes, you never know!
Help
Please guys, help us solve this problem. I dont know what to do anymore, and it is driving me crazy.
Thanks.
I noticed this behaviour on my Diamond last week. Not sure if it is related but I had similar problems on my old Trinity. When switching between vibrate/silent and normal sound profile Windows would not always register this correctly. Further investigation revealed the the system volume was being updated but the phone/ringer volume stayed at silent. Do you often switch between Silent and Normal?
Never got to the bottom of this on Trinity, although it did improve (happened less often) after I flashed WM6.1 over the original WM5. As there seams to be a silimar issue on Diamond I would guess that its either a WM6.1 problem or something to do with the way that HTC's profile switcher interacts with the OS.
Only thing I can suggest as that next time it happens you check the ringer volume either using the Sounds setting (Settings tab on TouchFlo) if its set to 0% then it may be the same thing.
rickturatti said:
I've having problems since i've bought my diamond. It's suddenly stops ringing and starts only vibrating when i have an incomming call, without sounds. When it happens I have to make a soft reset to it become normal again; but the same problem occours many times in a day! I tried to play music when it occours, and the speaker works normally. All volume (ring and system) are in the maximum. Every day i loose many calls because of this problem. I have already updated the rom version with the one provided by HTC hong kong, but the problem continue. I have a ring delay problem too; it rings on the 3rd time, after the lights flashes. Can anybody help me?
Please.
HTC Touch diamond P3700
Rom Version: 1.93.831.1 WWE
Rom date: 07/18/08
Radio Version: 1.20 OliNex
Click to expand...
Click to collapse
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
I have the same problem. I'm on 1.37 ROM - I only noticed it recently. All other sounds play fine, and the speaker volume is correct and it's not on silent or vibrate.
Phone setting is Ring AND vibrate, but trying Ring only doesn't work either.
I'm disappointed with this phone performance though think it's the Touch Flo. I tried a 1.93 but they took out the transitions - no idea if the ring worked then or not - but it was no faster IMO.
For god's sake a phone which never rings is bloody ridiculous!
I wish I kept on the original Orange UK ROM verison....
I like the idea of a hard reset - but have zero confidence it will work. I do know it will take 30 minutes minimum to set up push mail, apps and all the other stuff again.....
I have a similar problem, posted it HERE
Sounds don't work (ring tones and MP3s), I can't hear my dialog partner and they can't hear me. It's very odd. Only switching off the phone helps. I'm very disappointed with the phone's performance.
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
captainsensible2002 said:
This issue has been reported before on the Tytn II (running WM6 and WM6.1) so its not a TouchFlo problem - if you search you will see instances of it cropping up all over the place but no 'official' response from anyone or indeed any sure fire fix to stop it happening.
In some instances people are attributing it to using a Bluetooth headset; on others, bluetooth has not been used at all and it has still happened. One of our managers at work had the problem on 3 successive MDA Vario III's (Tytn II) and then has had it again on a Compact IV, all running the stock ROM.
I would suggest it is an issue inherent in Windows Mobile, although it cannot be ruled out that its only in HTC's implementation as I have not heard of it happening on other WM devices. And it is highly intermittant - it would seem that if you have a device susceptible to it, then it will happen no matter what. If you don't, then it probably won't happen ever. So that, in itself, could point to a build/hardware fault affecting certain batches of devices.
I think if you experience this issue AT ALL, then you should return your device under the warranty and demand a replacement, and keep doing so until you get a good one. Until HTC admits there is a problem and does something specifically to resolve it, this is possibly the only option and might actually force them to do something if so many devices are being returned.
By the way, posts suggesting that it might be due to the user having inadvertantly lowered the volume don't help - while peoples input is encouraged, input like that highlights that you have been lucky enough to not suffer the problem. If you had, you would know that it is utterly independent of what the volume level is set to.
Click to expand...
Click to collapse
Thanks for the advice, but I must go on searching for other solutions; because I bought it in UK and I live in Brazil. That's my problem. It must have other solution.
Nothing to do with the volume
Blazeitup123 said:
do you have sound setting on ring THEN vibrate? also to fix your ring lag, try diamond tweak. there is a ring without delay tweak in there.
Click to expand...
Click to collapse
The ring is set Ring AND vibrate. The problem have nothing to do with witch volume the sound is set or the profile. And I rarely set the fone to vibrate only.
oh f**king great! I hadn't realised this was an issue and have not only unlocked my ROM but also flashed to a new ROM from the original!
Does anyone in the UK have an experience of returning a handset on Orange where this happened?
I can't find a UK Orange Diamond ROM anywhere but have flashed the OliNex Radio back to a stock HTC one......
Loving the Diamond... but big issues have come up and they are starting to make it difficult to really use the device. I am trying to determine if the issues I am having are brought on by myself or if the issues are related to some challenge with the phone or my carrier.
"What's the issue," you ask?
The Diamond will not pick up a call. The phone will ring, the caller display will come up, I'll try and pick it up by either pushing the onscreen command or pick it up via the pick-up button... nothing. The call rings through to voicemail. Meanwhile I have to call the person back who just called me. Massively irritating and even more irritating it's does actually pick up SOMETIMES. The problem is I cannot determine why it works sometimes and why it does not. 90% of the time it does not work. When I do get it to work all I need to do is activate my bluetooth headset and then turn it back off and we are back in the same situation where the phone will not answer, however, this time... the phone does not RING either! Yes that's right - all sounds go bye bye on the phone when I activate BT and then turn it off. Also, I cannot pick up the phone with bluetooth headset. I can hear the phone ring through and everything looks dandy but no go! Push the pick-up button - nothing. This isn't such a big deal really - I mean - who cares if it picks up on the BT headset - I just want to be able to answer a call in general!
Now - I do have a lot of applications on the machine from a modifcation perspective and I am thinking this could all very well be my fault. I have Advance Config, Diamond TF3D config, and Diamond Tweak all loaded (each have their own benefit.)
Strange thing is... I just did a test and the phone picks up JUST FINE. I'm about ready to pull my hair out. It's really hard to put my finger on it. Tried it a second time, if I try to answer with the soft key it won't work but the hard key will work. Now the hard key will not actually hang up the call - I have to use the softkey to hang it up. I don't know if anyone is having the same issues but I am to the point of hard-reset to start from scratch.
I actually had the "can't pick up" problem just yesterday, but with my Prophet. Using Pdaviet's MyVista 6.1 Rom and S2U2. The phone rang, S2U2 displaying the full screen call notification, no chance of picking up the call.
Do you also use S2U2?
When you find your self in a hole, it usually helps if you stop digging.
Unpalatable as it might seem, I think with hassles like you've got, a HR is probably your best option.
ps, just a thought, have you at any stage in your tweaking done any button or key re-mapping... either inadvertently or by design? Maybe worth a check before giving up
wow, that's a whole load of issues
I've had my Diamond for about a week now..... and have had none of those issues..... Bluetooth works fine, picking up is a breeze....
what provider are you with?
I remember reading more complaints about sound going bye after Bluetooth use in the early days of the Diamond. Try searching around a bit and see if you can find something. However, seeing your other issues, a hard-reset might not be out of place.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Click to expand...
Click to collapse
By far probably the best advise yet!
The emotional side... aka incredible hulk... came out and punched shift/keyboard number row (pounded rather.) I was thinking in my head, "smash Diamond" and the KB had to take the abuse.
Carrier information for those who asked.
CDMA Diamond on the lovely Telus system (aka - Tel-us, we take your money)
As with all troubleshooting, you need to start from beginning. When you first got the phone, it could answer call. Right? So you need to trace back to what have you done to the phone step by step and to find out when it starts to fail.
Doh... Well I reset the device... seems to work now but something that seemed to be working before was my Zune subscription music from Zune Pass was synching to my mobile device via a Synch Center setup. I was amazed it was actually working... now it's not working So - I get calling back and lose the little trick that was working - Zune Pass DRM music synching with my Diamond... you win some and you lose some I guess doh.
jessiethe3rd said:
Loving the Diamond... but big issues have come up and they are starting to ma...my carrier.
"What's the issue," you ask?........... The call rings through to voicemail. Meanwhile I have to call the person back ............who just called me. Massively irritating and ev............... to hang it up. I don't know if anyone is having the same issues but I am to......... the point of hard-reset to start from scrat.........ch.
Click to expand...
Click to collapse
You should do some research and some reading.
And relax a little before you Fire up and disrupt a Community in peace.
I have the same thing going on now... same programs installed as you.
Is it still working after a hard reset? Did you re-install all the same programs?
Well, I'm on a Telus Diamond, and had the no answer problem, and solved it with a hard reset.. just try it, it doesn't take too much to get everything back to the way you had everything..
I have an AT&T tilt and I just upgraded it to the WM6.1 ROM from the HTC webpage and since then I have noticed that when I turn of the screen, all of a sudden it just lights up for a sec and turns off again, without any reason, is there a way to fix this, do i have to flash it again? what do I have to do?
i have the same issue, seems like after i flashed it happened.. any ideas?
one cool feature is that when it flickers, if u press the screen constantly, it flickers.. like a strobe light.. lol
I have the same problem. It's annoying because I think I'm getting a text or call. and usually I don't receive texts, i have to see it light up then press the mail button to see if I have a new text. ARGH.
My Tilt does the same thing. It's a whiteish-gay light. It'll come on for short bursts or I'll notice it on in the middle of the night, and who knows how long it's on until I notice it.
I had upgraded to WM6.1 a while back, and didn't have any issues, but had to hard reset my Tilt and it has been doing it since.
It doesn't do it all the time, either. Weird.
Mine Does The Same Thing
I hope there is a fix some time for this ..
I'm glad i am not the only one, but havent found a fix yet
I seem to remember there being an issue with screen flicker when the Tilt first came out, I think it was related to having Telnav selected in the today screen items tab. Try removing the checks one item at a time from the items tab, I doubt it will be as simple as a software conflict but it could be worth trying.
I had an issue with SPB Pocket Plus on my today screen, once I moved it in to a tab on SPB Shell the issue disappeared.
Fixxed?
I dont know if it just stopped doing it, I am not paying attention anymore or if one of the many things I did finally worked, but the truth is i havent seen it do it again, Thanks to everybody
It been happening on my Tilt since I got it last month.
This is happening on my tilt too... only after upgrading to 6.1. Glad to see it is not just me, but very concerning that this is a problem directly in the 6.1 TILT rom.
Bump........
Any body have any luck on this? I continue to have this problem.
Adding my voice and another symptom
is anyone else having this problem:
1. lock the tilt by tapping 'device unlocked'
2. tap the power button.
3. the backlight comes on, no picture but instead of flashing it stays on draining the battery
4. tap the power button to turn the tilt back on
5. tap the power button to turn tilt back off again
6. tilt stays off.
the issue did not change with the backlight hotfix.
Maybe try another ROM
Finally, i found others with this stupid glitch
I thought it was a hardware error, so i had AT&T send me a warranty/replacement, and guess what... comes out of the box and STILL DOES IT! Has anyone with this problem tried installing a DIFFERENT ROM, like one from the XDA forums? I'm about to try that, because i am fed up with this. I will report if it works. ARG!
Sorry for the ranting. but in a way, i'm relieved. that there are others with this problem
... It might pay to just go back to Windows Mobile 6.0.....
-=ZYXTIA=-
Different ROM fixed problem, but just had more problems after. Sorry guys.
Me Too...
I am glad that I have found other people with the same issue as me. I thought it was just my phone, as I do a lot of backups and restores after I do something stupid with my phone and I also use a lot of beta/unstable software, and figured it was caused by these. However, it only happened after I upgraded to 6.1 stock ROM. Maybe somebody can figure out exactly why this happens, and then we can come up with a fix. I am just happy that I'm no longer alone with this issue
-Dave
I'm very pleased to know that it isn't just me experiencing this stupid backlight issue.
It started happening the second I upgraded to WM6.1
Funny thing is, it only happens to me if I Lock the phone (keys) and turn off the screen. If I just turn off the screen without locking, the backlight stays off.
It would be really great if someone could come up with a fix for this that doesnt require me to reflash my phone with some cooked up rom
has anyone tried this hotfix?
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
i'm experiencing the same problem, will try it and post back as soon as i can
edit: didn't work. got some error about it couldnt remove the old customization tool or something like that
Running the AT&T 6.1 ROM and silly thing turns on by itself at 12 midnight. No connection to anything as I leave it in Flight Mode. Only goes off after I hit the Power Button. Drains the battery down to about half by the time I leave for work at 7AM.
Really is annoying!
Possible Solution
If you are still under warranty, call up AT&T warranty replacement (Customer service is 1-800-331-0500, and just ask for warranty department), and tell them you have this problem. TELL THEM YOU THINK IT IS A HARDWARE ISSUE, and they will send you a replacement, refurbished Tilt. The next one will also have WM6.1 on it, and do the same thing. HOWEVER, it is AT&T policy that after two replacements, instead of getting another one the third time, they give you a refurb of a DIFFERENT MODEL. That is how i got the AT&T FUZE (a.k.a. the HTC Touch Pro, a.k.a the "Raphael"). It doesn't have that problem. But otherwise, i have no other suggestions. i'm just sick of having AT&T screw up the phone's software, and then try to pass it off as quality.
Mine comes on exactly at midnight!
Annoying as hell...and the light from it wakes me up from across the room.
Mack
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.