White/Blank screen after sliding keyboard - HTC Wings

Hi,
I've flashed my phone with Alcaline's Rom and everything worked great for a long time now. However, suddently the phone began to show me a white/blank screen whenever I wanted to write a sms/mms, slided out the keyboard and then slided it back again. Has anyone encountered the same problem?
I've tried a reset my phone as I thought is may have been a program or something causing it, but the problem is still there.. :/
May it be a hardware-problem?

hi,
this is not ROM problem...this is hardware flex cable problem

yes, you have to change the f,lex cable beween the slides

Related

Diamond broken - touchscreen doesn´t react

this sucks!
From yesterday to today the failure got worse. Now the touchscreen doesn´t accept any input any longer. Made soft reset and hard reset nothing helped. When I bend down two edges of the case gently the device accepts that as an input in the top right corner and opens the taskmanger, with some luck I can use the touchscreen after that for a few clicks and then I can´t make any inputs again. Via active sync and MyMobiler I can do everything with the device so it has to be the touchscreen.
Anyone who had such a failure too?
Any ideas?
Had that problem as well , found it was down to batti , removed it , and the problem was solved , have found though if you install everything you want the phone can slow down , but by using sprite backup and then a hard rest ( then putting the back up back to the phone ) it runs as fast as it was before the apps were installed plus there is more memory as well on the phone , think some apps and games leave some temp crap which hogs down the phone
but after a hard reset batti was gone but the not malfunction?!
could it be an issue of the screen protector? did anybody had some problems with that?
Using the most recent batti AND a screenprotector, and I have no problems at all.
then it has to be a hardware malfunction. think I have to send it in...damn

Keyboard problem - Hardware or Software?

Hi guys,
I searched and found nothing specifically related to this. I tried disableXT9.cab but it did nothing.
I recently broke the screen on my second Kaiser so I had to replace it with the screen from my first (which reception problems so I stopped using it). To do this I followed the guide posted in these forums on disassembly and successfully switch the screen. I sent text messages right away after I reboot my phone and the keyboard was working fine. A few minutes later a few of the keys had stopped working. The delete key didn't work. At one point it started to work again but didn't work anymore after that.
I figured it was a connection problem so I took my kaiser apart again and rebuilt it. Unfortunately it didn't work. I tried again. This time some more keys stopped working (not sure if its because of disassembly or not - my connections are perfect). It's possible I scratched the connection ribbon... so I replaced the keyboard with the keyboard in my other phone, but I still have the same problem.
Is this a hardware problem I can't fix? (if so why did it work right after I got it to work the first time)
Or is there something funky going on with my software?? Can I fix this?
Thanks!
I tried to flash a new ROM and the same keys are still not working.
I guess this means it's a hardware problem???
Does anyone know if I can do anything to fix this.. i already tried switching the keyboard...
i'd like to figure this out as well.. i don't think it's hardware as i've changed my tilt 5 times already by complaining about the keyboard.. is yours like mine where it works sometimes but not all the time?

My buttons don't want to be touched...

Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.

touch screen does not work at all

Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.
What you need to do is fully charge the phone, run a backup usin PPM or sprite then do a soft reset and leave it for a day, if that doesnt workt hen run a hard reset and it will fix it, been through that problem too a couple times and it ends up workin fine
Thank you
Thanks a lot. but please tell me when you say to leave it for a day i should leave it with baterry in or out. Or do you mean to do the soft reset and leave it for a day to the screen where it sais to tap the screen. And by a day you mean 24h?Thanks again anyway
Ok.But where can i find a new lcd? And how much is it one?
I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
i flash the ori rom n change lcd n ribbon but still cant do the alignment on touch screen n get into the menu try the board n put it in another p4550 still cant touch screen,is it board problem ?
i have the same problem
i think its a hard problem i try everything but nothing
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
I had prob woth touch screen and non functional front camera. Restored function by replacing flex cable. This flex cable has the buttons for the keypad as well as supporting the front camera. When I examined the flex cable, the portion that moves in and out when sliding the keyboard appears to be slightly damaged on right and left sides. The damaged portion does contain very thin circuits.
Not sure why this was posted in Accessories but I'll move it to General for you.

Keyboard slide lag/freeze problem.

Carrier: Rogers (Canada)
Mode: X1A
Hi guys, I've got a pretty big problem with my phone so I'm hoping someone can help. My Xperia is about 10 months old, and it just started giving me this problem last week.
When I slide the keyboard open, the display either doesn't switch to landscape mode, or takes like 30-45 seconds to switch, and doesn't switch entirely so some aspects like the taskbar are still appearing with the stuff that was from portrait mode.
When I slide it out, if I start typing the text won't show up, but when I slide it back in, the text appears instantly so it is registering the key presses.
I thought it would be a software problem so I tried uninstalling some stuff even though i didnt add anything recently, didn't help.
Finally after suffering with I decided to do a hard reset. I was very surprised to find that this didn't fix the problem, because I don't understand how this could be a hardware problem.
I've been using the Touch X ROM for 8 months and have never had this problem until now.
Anyone have any ideas? If not - I'm going to flash back to the stock ROM and try to return under warranty. Is there any way for them to tell that I used a custom ROM and does that void the warranty?
The keyboard also illuminates when I slide it out so I know that the slide is being registered as well as the fact it usually but not always, eventually switch to landscape mode
Normally I would say its a ribbon failure but its a bit odd that it does eventually switch. But its almost definitely a hardware problem.
If you send it under warranty just flash to the stock rom, and the return it to the original spl. And yes having a custom rom will void the warranty, but they can't find that out if you return to original spl

Categories

Resources