Lost Password - Need Help ASAP - Touch HD - Touch HD Windows Mobile ROM Development

Hi Good people of XDA,
Having some spare time this evening, i thought i could indulge myself with some old flashing habit - thus i tried the wm 6.5 version from http://forum.xda-developers.com/showpost.php?p=3350560&postcount=265
And i am 100% sure i did put in the right password - and unfortunately for me i can't seem to remember the right password anymore, so i cannot get into the phone aat all. Could some one advice me on how to reset the phone or install a new rom, becasue i tried installing at fresh but active sync can't connect as expected.
Therefore i will be really greatful if some one can advice on how to get out of this nightmare.
...Please make my week end
Thanks for any advice in advance

Follow this method for installing a new rom.
------------------------------------------------------------------
You must flash HardSPL first to be able to flash this ROM!
* More info and instruction about HardSPL!
An alternative is USPL, it doesn't change your original SPL!
* More info and instruction about USPL!
SAFEST WAY TO FLASH YOUR ROM IS THROUGH STORAGE CARD METHOD:
* Copy BLACIMG.NBH into the root dir of your Storage Card.
* Be sure to have at least 30% of charge.
* Turn off your device by using the Power Button
* Go to Boot loader mode. Push and hold Vol. Down + press Power button.
* As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
* The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.

I figured it out Thanks - did a hard reset
To perform a HTC Touch HD hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

jpmalum said:
Hi Good people of XDA,
Having some spare time this evening, i thought i could indulge myself with some old flashing habit - thus i tried the wm 6.5 version from http://forum.xda-developers.com/showpost.php?p=3350560&postcount=265
And i am 100% sure i did put in the right password - and unfortunately for me i can't seem to remember the right password anymore, so i cannot get into the phone aat all. Could some one advice me on how to reset the phone or install a new rom, becasue i tried installing at fresh but active sync can't connect as expected.
Therefore i will be really greatful if some one can advice on how to get out of this nightmare.
...Please make my week end
Thanks for any advice in advance
Click to expand...
Click to collapse
Well, did you solve your problem?

Related

Hard reset cant restore Factory setting

Hi all,
what can i do?
You sure that what you're trying to perform is a hard reset, not a mere soft-reset?
If yes, this is really weird. Try flashing your ROM again.
jasczj said:
Hi all,
what can i do?
Click to expand...
Click to collapse
If you are trying to perform a hard reset and it doesn't work and phone won't reboot, then only other option you have left is to put phone in bootloader and flash stock/cooked rom.
Does phone reboot ok? Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Fallen Spartan said:
If you are trying to perform a hard reset and it doesn't work and phone won't reboot, then only other option you have left is to put phone in bootloader and flash stock/cooked rom.
Does phone reboot ok? Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Click to expand...
Click to collapse
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
jasczj said:
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
Click to expand...
Click to collapse
Have you tried a Hard reset?
As Fallen Spartan wrote : Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
If it doesn't help try to flash a cooked or stock rom but I recommend you to first try the hard reset.
jasczj said:
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
Click to expand...
Click to collapse
Bootloader is the tri-coloured screen you are getting
If you can get phone in bootloader then you can still flash new rom.
First of all try a hard reset by doing the following:
1. Turn phone off
2. Hold down vol up & vol down
3. Continue to do No.2 and turn phone on
4. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Once complete if phone still doesn't reboot you will need to flash new rom by doing the following:
1. Turn phone off
2. Hold vol down button only
3. Continue to do No.2 and turn phone on
4. You will be presented with bootloader screen (tri-colour screen)
5. Connect phone to pc and bottom of screen text should change from 'serial' to 'USB'. If this doesn't read cRaCKwHoRe's guide (see link below) as you may need to update pc drivers.
6. Now flash original stock rom from which you have downloaded from wiki. You can find stock roms here. To flash rom you will need to run ruu file from pc (this is rom you have downloaded)
Make sure you only flash original stock rom which was already on your phone. If you want to flash other roms you will need to follow cRaCKwHoRe's guide
I'd recommend reading the wiki so you understand more about the process and you phone
Good luck and keep us informed

please help, my diamond won't boot up at all

Dear friends,
I was trying to flash my diamond with mtty, where i guess i messed up with commands, I formatted it, then tried to restart with "task 8" then my phone turned off and never on again no matter what i did or key pushed.
Any help will be much appreciated...
me too
but i don't know how to use Jtag recover BL for Diamond
Update ROM by using the BootLoader
Hello there,
even though you can't boot into your OS in the Diamond, there's a way to enter "BootLoader" mode. I'm not sure it works, but you can give it a try.
Here's how:
- Connect the Diamond to your PC
- Enter bootloader mode on your Diamond: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
- Use the ROM Update Utility. If the previous step worked and your connection is working, then with some luck you will be able to Flash the Device with the ROM update utility.
I've tried to find the thread that discussed this with pictures and such but couldn't. You might want to look for similar instructions
Good luck
Shane
JTAG
does anyone managed to JTAG diamond?

I dled a CDMA instead of GSM rom.. HELP

I tried to search so if this is a re post im forreal sorry.. but i dled a CDMA rom and started a bootload .. and now im locked out..
Grey screen .. no button response.. Someone re assure me im not dead in the water.. .
I appreciate it... "Read twice flash once" right.. hopefully my phone will survive the live and learn process with me.
try a hard reset
Hard Reset (This cannot be performed while the device is connected/charging)
With the device turned off, press and hold the TALK/SEND and END/HANG UP buttons, then the press and hold the POWER button until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel."
Release the TALK/SEND, END and POWER buttons.
Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
(procedure found in Wiki)
Tmo or ATT?
both have official roms out, or found in a thread, i would try the correct one for your phone...
best of luck to you... i hope everything turns out ok
Official AT&T HTC Tilt2 Rom
http://forum.xda-developers.com/showthread.php?t=629059
Official T-Mobile TouchPro2
http://forum.xda-developers.com/showthread.php?t=620550
IMEI can also be found behind the battery
Are you able to enter bootloader mode (restart the device when holding down the VOL down button)?
If so - load a GSM ROM to the root of your SD card. and name it RHODIMG.nbh instead of ruu_signed.nbh. Then enter bootloadermode. You will have to press the powerbutton to flash the "update", and then soft reset with your stylus after update (or take out your battery).
Hope it sorts out
Hard reset isn't going to do anything if you've put a GSM ROM on your CDMA phone. You should be able to get into the bootloader though, as Novek has said (try pressing "reset" with the Volume Down button held down), then you can re-flash a CDMA ROM.

help me cant enter bootloader

i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please
dlegendkiller said:
i am trying to use SEUS to update my rom, the problem is i cant enter the bootloader
i followed these instructions.
1. make sure battery power is 50% above
2. turn off x1
3. remove battery
4. return battery
5. hold volume down, then hold power
after that, my x1 boots normally, not in bootloader.
help please
Click to expand...
Click to collapse
2. Make sure X1 is off
3.-4. You can skip this if X1 is really off
5. Press on the "down volume" (the button you press to decrease volume level) and DO NOT LET GO
6. WHILE STILL PRESSING the volume down key, press the power button AND DO NOT LET GO OF BOTH KEYS until the tricolor screen appears
it still doesnt work sir,
pinoy here
are there requirements in entering bootloader?
please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?
If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method
harveydent said:
If you just want to update your phone, you really don't need to use SEUS. Just flash the WWE R3A stock ROM (it's in the stickied thread in the ROMs section) using the RUU (activesync) method
Click to expand...
Click to collapse
but in this case it think it's very important to say that it's only that simple if he want's to flash a stock-rom!!!
(meaning "an original rom by SE")
@dlegendkiller:
if you ever want to flash a custom-rom then first read about flashing hard-spl and then do it before flashing custom-roms. if not, you can get into serious trouble. (it's easy and save if you follow the instructions)
dlegendkiller said:
please help me, is it required to have my memory card formatted? and my phone is fresh (hard reset)?
Click to expand...
Click to collapse
honestly, i think you're either doing something wrong here OR your volume-button is broken. regardless of your sd-card you should be able to enter bootloader-mode (the tri-color screen).
are you really doing it this way? to test do it without the usb-cable attached:
- turn your phone off completely
- press your volume-down-button and keep pressing it
- now press the power-button and also keep pressing it
you'll know when to release the buttons yourself.
anyway, can i get some advantages in updating my rom? i really am scared to install custom roms, i might break the phone
and i want to install manila hd, i am wondering why i cant install it
its about "system permissions etc etc"
does it require custom rom?

please i need serious help .....

hi ...
i have HTC opal and from while i have install a new ROM and it's work ok
then after two week .. my phone does'nt work he hang at boot screen
is there any way to format it with out it working .... please any help .
try a hard rest
Don't worry, your device is not damaged. Follow the guide here to fix your problem:
http://forum.xda-developers.com/showthread.php?t=685025
Note that you'll lose all data on your device when performing this fix. Hope you have a backup at hand!
Essential thing to be known:-
1. Bootloader mode Knowing how to enter into Bootloader mode is one of the most essential thing to be known for a opal user (windows mobile users).
How to enter?
There are two way to enter into bootloader mode.
1. If you device is on, open your device's back cover. Press the soft reset button ( red button ) using stylus. As soon as you press it, immediately press the volume down button and keep holding it until you see a tri-color screen on your device's screen.
2. If your device is off, press the power button as soon as the device vibrates immediately press volume down button and keep holding it until you see a tri-color screen on your device's screen.
Uses?
If you flashed a damaged rom, you would be no longer able to use your device. In that case enter into bootloader mode. And flash a different rom.
Click to expand...
Click to collapse
Good luck..
thnx .... i will try it ....

Categories

Resources