hi , i want to format my whole diamond (my device/internal storage) and then reinstall rom and some files/data.
i want to do this like this: in tf3d go to settings -> "delete volume/storage"
1.do i have to reinstall hard spl?
2.does is delete my rom on my device?
3.take care of what?
4.which steps do i have to follow?
ps: i already backuped my files/data
thy and greetings , domi
Formatting...
Formatting your device won't remove your hard-spl or your ROM. It will however, remove all third-party software (ie. everything you've installed yourself since your last ROM update / hard reset).
Formatting the 'Internal Storage' will remove everything (from Internal Storage, not the device).
Go to Start - Settings - System tab - Clear Storage and select 'Clear storage and format internal storage' - enter 1234 in the text box and tap 'YES'
There are other ways to do this involving holding keys while pressing the reset button, but I don't want to complicate things! Just remember to back up all your data first (Appointments, contacts, personal files, etc...)
i have an airtel HTC diamond.its unlocked by olipros method,so will it get locked again if i hardreset the device ?
Go to Start - Settings - System tab - Clear Storage and select 'Clear storage and format internal storage' - enter 1234 in the text box and tap 'YES'
Click to expand...
Click to collapse
...This actually clears the main devices storage, not the internal 4GB Storage, yes?
To format internal storage.....maybe a little complicated but not really is to soft reset the quickly press (Vol Down + Centre Circle Buttion).
Then a grey screen appears. From here ....just follow instructions. Vol. Down will do the trick and erase your internal. Vol. Up just for the sake of knowing resets what ever ROM you have to manufactures default settings.
shreyas2812 said:
i have an airtel HTC diamond.its unlocked by olipros method,so will it get locked again if i hardreset the device ?
Click to expand...
Click to collapse
No...all that stuff (Unlocked business, HARD SPL, etc.) stays in the bootloader and is separate from your devices storage.
Clear 4GB storage...
The way I described clears both device storage AND internal storage... like the instruction says 'Clear storage and format internal storage'.
That's what your 4GB is - internal storage!
and how can i completely reset the phone? that evrything is deleted. or is this not possible
band27 said:
No...all that stuff (Unlocked business, HARD SPL, etc.) stays in the bootloader and is separate from your devices storage.
Click to expand...
Click to collapse
thank you sir,i am new to windows mobile phones .so can u help me.
i rom version is 1.93.720.2 wwe
radio is 1.20 Olinex
in the tri color screen i get
security unlocked
diam140 mfg 64m
spl -1.30.olinex
how can i upgrade the radio and rom ? im using indian carrier(unlocked phone)
can u suggest me a good rom and radio! i want my phone to be fast and stable.i dont care about the battery life
thank you
can anybody please help me with this
As I said...
domi144 said:
and how can i completely reset the phone? that evrything is deleted. or is this not possible
Click to expand...
Click to collapse
As I described in post #2!!
You cannot delete everything, otherwise your device would be an expensive paper-weight! The method I described resets the device to it's original state (that's the original state of whichever ROM you have installed).
grahamkdt said:
The way I described clears both device storage AND internal storage... like the instruction says 'Clear storage and format internal storage'.
That's what your 4GB is - internal storage!
Click to expand...
Click to collapse
Opps! Didnt' realize there was a drop down menu ....you are right GT
shreyas2812 said:
thank you sir,i am new to windows mobile phones .so can u help me.
i rom version is 1.93.720.2 wwe
radio is 1.20 Olinex
in the tri color screen i get
security unlocked
diam140 mfg 64m
spl -1.30.olinex
how can i upgrade the radio and rom ? im using indian carrier(unlocked phone)
can u suggest me a good rom and radio! i want my phone to be fast and stable.i dont care about the battery life
thank you
Click to expand...
Click to collapse
I can't really help with selecting either or since these ROM's / Radio's are based mainly on subjective criteria. Do a little bit of research on those found in this thread. Some ROM's are titled, FAST, STABLE. Take a look at those.
band27 said:
No...all that stuff (Unlocked business, HARD SPL, etc.) stays in the bootloader and is separate from your devices storage.
Click to expand...
Click to collapse
thank you for this sentence. i followed TNYYNT's "[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!" and karkalanand's airtel upgrading guide. i have the fastest ROM aztors X2 ULTIMATE and blackstone 1.11.25.01 radio . no problems ,and 1.37 olinex dev edition
didnt brick my phone hopefully
i thank you people for giving me the real DIAMOND EXPERIENCE
band27 for that line gven above
olipro for his sim/cid/security unlocking tools
olipro+cmonex for the oLineX
TNYYNT for the wonderful upgrading guide
karkalanand for the AIRTEL diamond guide(without which i wouldnt have upgraded my diamond)
and ALPHAZERO for creating one of the fastest ROM
lastly - to XDA DEV
-------------------------
now on 2.xx AZTOR X2
bs radio
1.37 olinex
but still an INDIAN diamond !
Related
Hi all, especially the hacking staff (mamaich, xda2jojo, buzz_lightyear etc.)
On the Magician forum, the folks has just found out how can you merge the Extended ROM and the Storage into a bigger "BigStorage" drive. The downside is that you have to install manually your extended ROM stuff since there is no extended ROM; but you will have a bigger storage, which stays when you Hardreset (Which I do a LOT, because i like playing with different ROMs ). So, I'm asking you, is it possible to port this hack to BlueAngel?
KTamas
I'm also interested!!!!
KTamas,
This is what i have done. After upgrading my device with the latest ROM and installing all the cabs from extended rom, i emptied the extended rom and have it unlocked and unhide all the time and now i am using it has a storage option. Whenever i install any programs, active sync enables you to install in the extended rom. The only downsize is that if you want to hard reset you have to put back all the cabs back in the ext rom. I use sprite restore whenever i have to hard reset so i skip this step also. I guess you can try this option.
Hemant.
Hemant said:
KTamas,
This is what i have done. After upgrading my device with the latest ROM and installing all the cabs from extended rom, i emptied the extended rom and have it unlocked and unhide all the time and now i am using it has a storage option. Whenever i install any programs, active sync enables you to install in the extended rom. The only downsize is that if you want to hard reset you have to put back all the cabs back in the ext rom. I use sprite restore whenever i have to hard reset so i skip this step also. I guess you can try this option.
Hemant.
Click to expand...
Click to collapse
Of course you can do it, but i want one big storage instead of two storage folders...
KTamas said:
Hemant said:
KTamas,
This is what i have done. After upgrading my device with the latest ROM and installing all the cabs from extended rom, i emptied the extended rom and have it unlocked and unhide all the time and now i am using it has a storage option. Whenever i install any programs, active sync enables you to install in the extended rom. The only downsize is that if you want to hard reset you have to put back all the cabs back in the ext rom. I use sprite restore whenever i have to hard reset so i skip this step also. I guess you can try this option.
Hemant.
Click to expand...
Click to collapse
Of course you can do it, but i want one big storage instead of two storage folders...
Click to expand...
Click to collapse
Probably a dumb question: how do you unlock the extended rom ?
Thx in advance for answer
Hans
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Section 5.
bosjo said:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Section 5.
Click to expand...
Click to collapse
Thy a lot !
Cheers
Hans
How do i merge both of 'em together ?
can you tell me what the exact pros adn cons are for this?
Hi All!
I'm newbie here. Please, don't beat me for my question .
I've got Qtek 9100, and now want to play with ROM. BUT! I read a lot of here, and haven't found the Full ROM Backup programm. Is it possible? Or, the only way to backup my original ROM partly, using aWizard?
Thanks for any help.
The aWizard tools do Backup all of the rom except bootloader.
BUT: The ExtROM is backuped in single files which is a problem when you want to insert the ExtROM back into the Wizard: because with the newer ROMs (1.6.x) the ExtROM can only be made visible (and stays read-only).
full rom backup
addr You can backup full ROM to SD card, and then to your PC.
Click my signature to get the tool.
Ah, great!
That's the very thing i was looking for!
Thanks Button!
addr said:
... i can't upload my ROM to SD Card, after entering r2sd all i got:
Cmd>r2sd all
***** user area size = 0x1E980000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Click to expand...
Click to collapse
Sorry, it was a bug in my command file, so CID-unlocking was failed.
Now everything works fine. Please, re-download the tool (click my signature).
I tried using your backup for my ROM, because I was going to upgrade. I'm definitely a newbie at ROM upgrading and backing up...
After running the backup utility, my Qtek won't see my mini-sd card anymore. Do you know how I can make it see my card again? Did the process reformat my card or is there another problem?
Thanks!
Joe
lanerebel said:
I tried using your backup for my ROM, because I was going to upgrade. I'm definitely a newbie at ROM upgrading and backing up...
After running the backup utility, my Qtek won't see my mini-sd card anymore. Do you know how I can make it see my card again? Did the process reformat my card or is there another problem?
Thanks!
Joe
Click to expand...
Click to collapse
the data backup in your mini-sd-card is not FAT compliant. but it's OK for restoring using Qtek's rom-flash procedure.
in another way, you can use tools like WinHex to view,edit or save your mini-SD to a PC as a raw binary file.
lanerebel said:
I tried using your backup for my ROM, because I was going to upgrade. I'm definitely a newbie at ROM upgrading and backing up...
After running the backup utility, my Qtek won't see my mini-sd card anymore. Do you know how I can make it see my card again? Did the process reformat my card or is there another problem?
Thanks!
Joe
Click to expand...
Click to collapse
If you have already saved your ROM image to PC (myrom.bin file), you can format SD card, and use it as always.
Um, I have a noobie question as well...
Will a full ROM backup take a backup up of everything installed after being shipped from the manufacturer, i.e. programs, reg settings etc., or will it only backup the basic ROM and extended ROM, i.e. what you're left with when you hard reset your device?
the_invisigoth Yes, only ROM, not installed apps.
Hi Button,
Does your program backup the whole ROM (ie OS + Extended) or just the OS??
Is there a way to backup the OS only so that I can backup the latest Qtek OS part only. Reload my T-mobile extended ROM then restore the Qtek OS only ROM, giving me the latest OS with my T-mobile customisation??
Cheers
John
odyseus said:
Hi Button,
Does your program backup the whole ROM (ie OS + Extended) or just the OS??
John
Click to expand...
Click to collapse
It backups Full ROM = OS+ExR+Radio+SPL/IPL+Splash..
Use aWizard to backup your ROM partly.
I needed Button's program before I updated to 2.8.7. I have a cingular 8125 I upgraded to 2.8.7 it overwrote my extended ROM, when I flashed everything back from awizard I relaized my extended ROM was not restored, so I flashed to 1.5.4 so I could access the extended ROM, but it downgraded my IPL and SPL to 1.?? from 2.??. So once I restored my extended ROM in 1.5.4 I upgraded just the OS to 1.8.11 from my original backup, and now when I do a hardreset it locks up during extended ROM installation. Unless I can find a way to edit the extended ROM on 2.8.7 I wont be able to restore my unit to original specs. Unless someone uses Buttons program on a Cingular 8125 and uploads it somewhere for me. I am gonna return this unit to frys and purchase it at the cingular store for a bit cheaper price. So I was hoping to restore it to orignal specs so the next helpless frys customer dosent get stuck wth a funky unit. Thanks all!
@Button,
would this method allow me to replace my 8125 to its original state including the bootloader flash screen ? i am needing to put my 8125 to its original state prior to returning.
I have a new 8125 that i could take a backup of and want to load it onto the one that i am returning. would this work ? thank you
Yes it should work.
Button,
does your program also perform restoral of ROM and all its content from the backup it's made ?
thanks for your help.
FarSeide said:
Button,
does your program also perform restoral of ROM and all its content from the backup it's made ?
thanks for your help.
Click to expand...
Click to collapse
It can backup only 'clear' ROM, without programms that you have installed manually.
THANK YOU BUTTON !!!!
I was able to FULLY RESTORE my Cingular 8125 to its OEM Spec including the first boot splash screen !!!!!!!!!
THANK YOU !!!!!!!!!!!
I spoke too soon.
Here's what happens...
After 8125 has been booted up, on the screen it says, "Data Crashes. Please contact your service Provider". And if you see on the top left corner, it says SIM LOCK. It will not let me reload the image again from the SD card from the bootloader. When I press the Voice Dial, it says, No Update Allow!.
I've tried to run the aWizard and Lokitz tool to unlock again but to no avail.
Have you seen thsi before ?
First, try to flash an old rom (from bootloader mode), - run any ruu. Then, unlock SIM and CID, if it is need. And then use SD card to restore your original rom.
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
ojtan said:
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
Click to expand...
Click to collapse
If you can access the tri-color bootloader screen, then your Treo 750 is NOT dead.
The ROM is bad or wiped but the bootloader is good...that is sufficient for you to flash a good ROM & get it up & running.
What do you see on the bootloader screen?
Which ROM did you copy into the mini-SD card?
You could copy the .nbh file from the original WM6 ROM Upgrade package & change it to CHEEIMG.nbh into a freshly formatted (FAT32) mini-SD card & flash using the mini-SD card method.
thanks konker. I finally figure out the way to flash it with original ROM.
ojtan said:
thanks konker. I finally figure out the way to flash it with original ROM.
Click to expand...
Click to collapse
Great! I'm glad you got your phone working again.
glad to know its working again
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Any answer
Hello Sam,
I actually had the same problem, did you get it fixed?
Please let me know, how?
Thanks a lot
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Apoapo said:
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Click to expand...
Click to collapse
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
safisam said:
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Click to expand...
Click to collapse
Have you tried re-downloading the ROM in case you have a bad file? Also, have you tried a different SD card, or re-formatting the SD card you are using? Sometimes that will help, and make sure the CHEIMG file is the only file on the SD card.
startngate said:
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
Click to expand...
Click to collapse
Thanks man, i was looking for any way to HARD SPL directly from the older loader, i couldn't find any.
But i already solved loading in the SD card an "original" ROM from palm.
Now i got this treo working again
Hi all
I have the same problem, after some progress during the update it stops and now I can see just the Palm logo inicialyzing...
I stil can get the Bootloader Screen (3 collors), but when I try to pass other ROM It says "file image corrupted"...
I´ve been trying with 4 SD card that I have (512Mbs up to 2Giga), but nothing works...
It seems that the Treo doesn´t recognize the SD card!!!!
How could I Pass a ROM not using the SD card??
Any help??
Palm treo 750 storage memory problem after flashing!Please help
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
darabah said:
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
Click to expand...
Click to collapse
First of all, please indicate which ROM you loaded on your device.
Secondly, it would help the community to help you if you could state what software modifications you've performed on the phone. eg. HardSPL etc
Lastly, a list of installed software on your phone would be useful too.
Palm treo 750 storage memory problem after flashing!Please help
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
darabah said:
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
Click to expand...
Click to collapse
From your description, it seems both of them are original stock ROM. Is your Treo a telco branded model or a unbranded unlocked model?
If the latter, you did not have to run the other utilities to unlock the phone...just flash the ROM.
I see that you ran the ExtROM unlocker...why did you have to do that?
The ExtROM is used to store device specific ROM customization that you should not have to bother too much if your ROM is a unbranded ROM (ie. not AT&T ROM etc).
If you left the ExtROM in it's unhidden state, that could be why the system is reporting the amount of free space to be so low. You should hide the ExtROM & then hard-reset the device again to see if that solves the problem.
Palm treo 750 storage memory problem after flashing!Please help
Thank u for your reply!
My Treo is unlocked model but i don't know if it is unbranded and it is from Palm Rom not AT&T ROM.
I'm news, can u tell me how to hide the ExtROM(Can u explain how to proced please?).
Thant u for all!!!!!
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
ccmaniac said:
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
Click to expand...
Click to collapse
You probably have the wrong SPL installed. If you flashed a ROM using Olipof's HardSPL v1 and are using a WM6.1 ROM, you need to upgrade your SPL.
Flash cmonex's latest 3.* Hard SPL's from here: http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
ccmaniac said:
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
Click to expand...
Click to collapse
Instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922
There are two sets BTW.
Ta
Dave
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
ccmaniac said:
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
Click to expand...
Click to collapse
If you are using a ROM based on a HTC Rom (which most cooked ones are) then 3.29. For ATT based ROMs then 3.56.
If you don't know, use 3.29, and if your not happy try 3.56
Dave
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
ccmaniac said:
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
Click to expand...
Click to collapse
Read the instructions I posted. I am not copying them out
Dave
3. insert the microSD in the kaiser, then reset kaiser. (I did soft reset???) But not start 4
4. it should say Loading / Update in progress then reboot to a screen saying SPL 1.00.OliNex.
5. it should now flash in the KAISIMG.NBH. and will reset.
6. at this point it should boot to the OS, if it doesn't, then flash an OS. (of course delete the previous KAISDIAG.NBH and KAISIMG.NBH from the sd card and remove sd unless you opt to flash the OS from sd too)
I did't do that with http://forum.xda-developers.com/showthread.php?t=420683
But I think I have made it with http://forum.xda-developers.com/showthread.php?t=396922.
Now I will flash Radio and Rom...
Thanks...
Using Dutty's Rom WM6.1 Hybrid v2 5.2.19716/5.2.19700 and works GREAT...
got the same problem, some one say i got a lot of progam runing and the os cant go well, i think i fix it setting X button to really close apps and dont go background
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
Hi,
I am new to attempting ROM upgrades!
I bought my BA on ebay it runs on wm2003se but have never used it as a phone because it needed unlocking so i thought i would try to upgrade then unlock.
After many failed rom upgrade attempts one finally started to install, it got to 100% then i was promped to soft reset my XDAiis which i presume is the normal proceedure?
So i did this, but now it is stuck on the blue, green, red and white screen displaying,
No GSM
HTC BlueAngel D 6. 50.28.WWE
I have tried hard reset
I have tried to install the O2 rom that came with it but it says its the incorrect country version!
Any ideas or is it Dead???
HELP
first: try hard resetting!
the procedure changed in comparison to wm2003se, so you have to press reset+power, and then immediately press camera+record. a menu shows up, showing
Enable KITL YES
clear reg. hive NO
format storage NO
using the camera and record buttons, change these entries to
Enable KITL NO
clear reg. hive YES
format storage YES
and press the mail button to confirm, after some time you will see the device boot for the first time.
probably that solves your first problem, but since you seem pretty unexperienced (no offense), it probably unveils more problems. you should also make sure to read this carefully, maybe follow the upgrade wizard again, to make sure you formatted your old extrom and resized it, have a working radio rom, and to make sure you know what you are doing and how to go on improving you BA experience:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
greetz
Chef_Tony
Hi,
Thanks for your reply i have tried hard reseting and still have the same problem, any other suggestions???
run through the wizard in the link above, you will need to downgrade to wm2003se again, resize the storage space, upgrade to wm6.5 doing everything exactly as written in the wiki and you will have no problems, here there is the step you are currently facing:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
the downgrade from wm5 or above down to wm2003
hello !
my screen stay white after the
"Enable KITL NO
clear reg. hive YES
format storage YES"
part. How can I do ? thanks
and it's a xv6600
i am not an expert when it comes to the different names of the device, but a quick google search told me, your device is not a blueangel, but a cdma device, namely a HARRIER. the harrier does not support wm5 and up, so you should flash your original shipped rom back, to get it back to work.
if you do not have your shipped rom present (on cd) you can go to your carrier's website and try and download it there. if, however, it is not listed there anymore, you can go download it here:
http://harrier.atspace.com/
all credit for the shipped rom archive goes to xplode.
greetz
Chef_Tony
great link thanks